Items where Subject is "Engineering and Technology > Mechanical engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 184.

Article

Cekerovska, Marija and Filkoski, Risto (2015) Efficiency of liquid flat-plate solar energy collector with solar tracking system. Thermal Science, 19 (5). pp. 1673-1684. ISSN 0354-9836

Cingoski, Vlatko and Golubovski, Roman and Gelev, Saso and Stefanov, Goce and Klepov, Goran (2015) A Novel Method for Control and Operation of Induction Motors Implemented in Intermitted Working Regime for Musical Fountains. ETF Journal of Electrical Engineering, 21 (1). pp. 84-92. ISSN 0354-8653

Cingoski, Vlatko and Nikolov, Igor (2013) Reduction of the development cost for SHPP utilizing a container-type mini hydropower plants. Proceedings of the Hydro 2013 - Promoting the Versatile Role of Hydro.

Cvetkov, Slavco and Kocov, Atanas (2014) Experimental analysis for defining forming limit diagram for thick sheets. Journal for Technology of Plasticity, 39 (2). pp. 47-54. ISSN 0354-3870-UDC 621.7

Cvetkov, Slavco and Kocov, Atanas (2011) Influence of the size of an hole derived in the initial material on the drawing workability of the cold-rolled metal sheets. 8th ICIT&MPT 2011, 368 (8). pp. 83-86.

Cvetkov, Slavco and Kocov, Atanas (2010) Influence of the surface quality due to a hole derived in initial material processing of cold sheets with drawing. Mechanical Engineering -Scientific Journal, 29 (1). pp. 47-51. ISSN 1857-5293

Cvetkov, Slavco and Kocov, Atanas (2012) Production of complex parts by deep drawing - deformation analysis. Journal for Technology of Plasticity, 37 (1). pp. 85-91. ISSN 0354-3870-UDC 621.7

Cvetkov, Slavco and Kocov, Atanas and Spiroski, Zoran (2012) Stress state in the process of deep drawing of sheet metal cover as a part of a clutch cover for commercial motor vehicles. Journal for Technology of Plasticity, 37 (2). pp. 143-152. ISSN 0354-3870

Cvetkov, Slavco and Simeonov, Simeon and Dimitrov, Sasko (2011) Influence of the placement of a previously derived ellipse shaped aperture in the starting material on the processing with drawing of the cold rolled sheet steels. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials) (7). pp. 41-43. ISSN 1313-0226

Dambov, Risto and Dambov, Ilija and Mircovski, Vojo (2017) Review of drilling and blasting parameters and some effects during blasting operations. Proceedings of the XIV International Conference of the Open and Underwater Mining of Minerals 03 – 07 July 2017, Varna, Bulgaria, 486 (1). pp. 109-114. ISSN 2535-0854

Dambov, Risto and Dambov, Ilija and Nikolic, Miroslav and Cacarov, Vladimir (2015) Seismic effects on the environmental related to blasting series. Proceedings of the XIII National conference with international participation of the open and underwater mining of minerals, 01–05 Sept 2015, Varna, Bulgaria.

Dambov, Risto and Karanakova Stefanovska, Radmila and Dambov, Ilija (2010) Минерско-технички карактеристики и услови за примена на експлозивите од типот Nonex. PODEX 2010 - Пробиштип, 3/2010 (5). pp. 15-22. ISSN 978-9989-2921-2-3

Danev, Darko and Kjosevski, Milan and Simeonov, Simeon (2014) Increasing stiffness of diaphragm-spring fingers as a part of system approach improvement of friction clutch function. International Journal of Automobile Engineering, 4 (1). pp. 11-22. ISSN 2278–9413

Danev, Darko and Kjosevski, Milan and Simeonov, Simeon (2013) Influence of the specific sliding work on tribological parametars of friction linings for heavy vehicle clutches. TTEM, 8 (4). pp. 1899-1903. ISSN 1840-1503

Danev, Darko and Simeonov, Simeon and Jordanovska, Vase (2016) Impact of basalt based thread linings on the tribological parameters of the clutch linings for motor vehicles. Tehnički vjesnik / Technical Gazette, Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, 23 (4). pp. 1227-1232. ISSN 1848-6339 (Online)

Danev, Dragi and Kjosevski, Milan and Simeonov, Simeon (1999) Identification of the friction linings structure parameters with significant influence on heavy vehicles friction clutches working characteristics. Megunaroden naucno strucen skup.

Danev, Dragi and Kjosevski, Milan and Simeonov, Simeon (1999) Impact of string/impregnant ratio of the composition of the linings material on the tribological characteristics of the motor vehicles clutches. Megunardna naucno strucen skup.

Danev, Dragi and Kjosevski, Milan and Simeonov, Simeon (2001) Impact of the decarbonated layer on the dynamic persistence (durability) of diaphragm springs of motor vehicles clutches. Megunaroden naucen skup - Zbornik saopstenja.

Despodov, Zoran and Mijalkovski, Stojance and Adjiski, Vancho and Panov, Zoran (2014) Selection of Belt Conveyors Drive Units Number by Technical –Economical Analysis. Applied Mechanics and Materials, 683. pp. 189-195. ISSN 1662-7482

Dimeski, Dimko and Spaseska, Dijana and Smileski, Rose and Srebrenkoska, Vineta (2003) Влијание на притисокот на пресување врз трауматолошките ефекти и балистичките карактеристики кај унидиреакционални и бидирекционални композити врз база на полиетиленски влакна со ултрависока молекулска маса. Зборник на трудови од III Советување за дупчење и минирање со меѓународно учество, Рударско-геолошки факултет Штип, Охрид, 28-31 May 2003. pp. 125-133.

Dimitrov, Sasko (2013) Investigation of static characteristics of pilot operated pressure relief valves. Annals of Faculty Engineering Hunedoara – International Journal of Engineering, XI (2). pp. 201-206. ISSN 1584-2665

Dimitrov, Sasko (2014) Transient response of a pilot operated pressure relief valve with compensating control piston. Annals of Faculty Engineering Hunedoara – International Journal of Engineering, 12 (1). pp. 227-232. ISSN 1584-2673

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2011) Experimental verification of a mathematical model of static characteristics of pilot operated pressure relief valves. Engineering Sciences, XLVIII (4).

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2015) Static Characteristics of the Orifices in a Pilot Operated Pressure Relief Valve. Hydraulica, Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics (2/2015). pp. 34-38. ISSN 1453-7303

Dzidrov, Misko and Mirakovski, Dejan and Simeonov, Simeon (2013) Vehicle emission of greenhouse gases in municipality solid waste collecting and handling. 3rd International Conference, Waste Management and Climate Change. pp. 39-41.

Dzidrov, Misko and Mirakovski, Dejan and Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko (2013) Economic Freedom And Conflicts Tendencies In The Balkan Countries. International Journal of Scientific & Technology Research, 2 (10). pp. 47-50. ISSN 2277-8616

Dzidrov, Misko and Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko and Stefanovska Ceravolo, Ljubica (2015) Study on the Importance of Knowledge, Innovation and Entrepreneurship on the Country’s Progress. International Journal of Scientific & Engineering Research, 6 (11). pp. 913-917. ISSN 2229-5518

Dzidrov, Misko and Stefanovska Ceravolo, Ljubica and Simeonov, Simeon (2016) From Efficiency to Innovation-Driven Economy with Stimulation of Innovation. International Journal of Scientific & Engineering Research, 7 (11). pp. 1144-1147. ISSN 2229-5518

Jordeva, Sonja and Cortoseva, Sonja (2013) Uticaj sirovinskog sastava i strukturnih karakteristika dvoslojnih interlok pletenina na fizičko-mehanička svojstva. Zbornik radova X Simpozijum "Savremene tehnologije i privredni razvoj". pp. 154-161. ISSN 978-856-82367-99-4

Jordeva, Sonja and Cortoseva, Sonja and Kaloyanov, Nikola (2012) Termo-fiziološki komfor dvoslojnih pletenina. Tekstilna industrija, LX (4). pp. 11-19. ISSN 0040-2389

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2014) Application of Apparel Cutting Waste as Insulation Material. Book of Proceedings 6th International Textile Conference.

Jordeva, Sonja and Tomovska, Elena and Zafirova, Koleta (2016) The influence of structural variations on wool fabrics air permeability. Advanced technologies, 5 (2). pp. 79-83. ISSN 2217-9720

Jovanovska, Vangelica and Jovanovski, Nikola and Paspalovski, Toni and Sovreski, Zlatko (2013) Greenhouse gas emissions from transport source. GV- CONF 2013. pp. 247-249. ISSN 1339-2778

Jovanovska, Vangelica and Jovanovski, Nikola and Sovreski, Zlatko (2013) Input factors for Successful Implementation of Decentralized Bioenergy Projects in Practice. Machines Technologies Materials, 7 (8). pp. 8-13. ISSN 1313-0226

Jovanovska, Vangelica and Jovanovski, Nikola and Sovreski, Zlatko and Pop-Andonov, Goran and Sinani, Feta (2013) Fuels made from agricultural biomass - (biogas) alternative types(Alternativne vrste goriva iz poljoprivredne biomase - biogas). Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2013 (342). pp. 66-77. ISSN 978-86-912929-2-0

Karolczak, Pawel and Kowalski, Maciej and Szmara, Adam and Trajcevski, Neven (2010) Application aiding rapid selection of cutting parameters on the example of aluminium alloys turning. Technological Engineering - International Scientific Journal, 7 (2). pp. 15-17. ISSN 1336-5967

Koceska, Natasa and Koceski, Saso and Durante, Francesco and Beomonte, Pierluigi and Raparelli, Terenziano (2012) Control Architecture of a 10 DOF Lower Limbs Exoskeleton for Gait Rehabilitation. International Journal of Advanced Robotic Systems, 10. p. 1. ISSN 1729-8806

Komitovski, Mihail and Dimitrov, Sasko (2013) Static and dynamic characteristics of direct operated pressure relief valves. Machine design, 5 (2). pp. 83-86. ISSN 1821-1259

Kostadinova, Slavica and Panev, Ace and Cingoski, Vlatko (2015) Some Optimization Methods for Increasing the Energy Efficiency of the Water Supply Systems. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 9 (11). pp. 7-10. ISSN 1313-0226

Krstev, Dejan and Pop-Andonov, Goran and Krstev, Aleksandar and Dzidrov, Misko and Krstev, Boris (2014) The intelligent transport systems – Risks and Benefits. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 22 (9). pp. 42-45. ISSN 1310 – 3946

Krstev, Dejan and Pop-Andonov, Goran and Krstev, Aleksandar and Dzidrov, Misko and Krstev, Boris and Pavlov, Sashe (2014) The multiple travelling salesman problem and vehicle routing problem for different domestic drinks. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 22 (3). pp. 96-98. ISSN 1310 – 3946

Krstev, Dejan and Pop-Andonov, Goran and Krstev, Aleksandar and Dzidrov, Misko and Krstev, Boris and Pavlov, Sashe (2014) The using of solver software and vehicle routing for the traveling salesman problem. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 22 (9). pp. 38-42. ISSN 1310 – 3946

Kuzinovski, Mikolaj and Cichosz, Piotr and Trajcevski, Neven and Tomov, Mite (2012) Computer aided engineering of the surface layer in the machining process by material removal. Systems, Journal of Transdisciplinary Systems Science, 16 (2). pp. 25-41. ISSN 1427-275X

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 29-32. ISSN 1821-4932

Kuzinovski, Mikolaj and Trajcevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Computer aided system for investigation of cutting forces and temperature in turning. Górnictwo Odkrywkowe (7-8). pp. 10-14. ISSN 0043-2075

Kuzinovski, Mikolaj and Trajcevski, Neven and Filiposki, Velimir and Tomov, Mite and Cichosz, Piotr (2009) Monitoring system for automation of experimental researches in cutting. Mechanical Engineering – Scientific Journal, Proceedings, 28 (2). pp. 41-60. ISSN 1857 – 5293

Kuzinovski, Mikolaj and Trajcevski, Neven and Tomov, Mite and Cichosz, Piotr (2010) Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process. Górnictwo Odkrywkowe, 3. pp. 148-153. ISSN 0043-2075

Mitkovska-Trendova,, Katerina and Minovski, Robert and Boshkovski, Dime (2014) Methodology for transition probabilities determination in a Markov decision processes model for quality-accuracy management. Journal of Engineering Management and Competitiveness (JEMC), 4 (2). pp. 59-67. ISSN 2217-8147 (online), 2334-9638 (print)

Mitreva, Elizabeta and Angelovski, Goranco and Filiposki, Oliver and Taskov, Nako and Gjorshevski, Hristijan (2016) Optimization of Business processes in Airport Services Company in Macedonia using the TQM Philosophy. TEM Journal, 5 (4). pp. 507-514. ISSN 2217-8309 / 2217-8333 (Online)

Mitreva, Elizabeta and Chepujnoska, Violeta and Chepujnoski, Gjorgji (2008) QC-CE-Pyramid model in the designing of the information system within a company. Macedonian Journal of Chemistry and Chemical Engineering, 27 (2). pp. 163-168. ISSN 1857 – 5552

Mitreva, Elizabeta and Pancev, Donco and Gjorshevski, Hristijan and Filiposki, Oliver and Metodijeski, Dejan (2017) The implementation of the Quality Costs Methodology in the Public Transport Enterprise in Macedonia. TEM Journal, 6 (1). pp. 153-161. ISSN 2217-8309

Mitreva, Elizabeta and Taskov, Nako and Angeleski, Milan (2015) Approaches for the Advancement of Business Processes in a Company that Deals with Graphic Production. Actual Problems of Economics, 6 (168). pp. 190-201. ISSN 1993-6788

Mitreva, Elizabeta and Taskov, Nako and Lazarovski, Zlatko (2015) Application of the methodology for improving the business processes for the compamy for Airport services TAV Airports Holding, Macedonia. International Journal of Information, Business and Management, 7 (2). pp. 29-43. ISSN 2076-9202

Mojsoska, Natasa and Stefanov, Goce and Sovreski, Zlatko (2012) Resistance testing analysis of stator winding for prophylastic tracking of large turbogenerators. EIIC 2012. pp. 613-616. ISSN 1338_7871

Nagakura, Satoshi and Noguchi, So and Kaneda, Kazufumi and Yamashita, Hideo and Cingoski, Vlatko (2001) Automatic Quadrilateral Mesh generation for FEM Using Dynamic Bubble System. Ieee transaction on magnetics, 37 (5). pp. 3522-3525.

Nagakura, Satoshi and Noguchi, So and Yamashita, Hideo and Cingoski, Vlatko (2002) Automatic Hexahedral Mesh Generalization Using Shape Recognition Technique and Tree Method. Ieee transitions on magnetics, 38 (2). pp. 416-420.

Nikolov, Elenior (2004) Мобилност на копнените возила и примена на возила на електричен погон. National Journal: Modern Macedonian Defense, 4 (10).

Nikolov, Elenior and Korunoski, Dame and Angusev, Koco (2009) Анализа на динамиката и вибрациите кај моторите со внатрешно согорување. Proceedings of Abstracts from 9th Scientific Conference, ETAI-2009, ISBN 978-9989-2175-4-8. pp. 147-148.

Nikolov, Elenior and Petreski, Drage and Dimitrovski, Dame (2011) Компјутерски дизајн на клипови со мала тежина со примена на Алгор - ФЕА систем. National Journal: Modern Macedonian Defense, 12 (21).

Paspalovski, Toni and Mojsoska, Natasa and Jovanovska, Vangelica and Jovanovski, Nikola and Sovreski, Zlatko (2013) Replacement (reconstruction) of the active steel end zone of the turbogenerator. GV-CONF 2013. pp. 659-663. ISSN 1339-2778

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Нов метод за динамичко испитување на запалки за противтенковски мини. Зборник на трудови од 8-ми симпозиум за теоретска и применета механика, Скопје, 3-5 Oct 2002. pp. 105-111.

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Воспоставување критериуми за испитување запалки за противтенковски мини. Зборник на трудови од „Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија“, Охрид 2002. pp. 395-403.

Petreski, Drage and Dimitrievski, Ljupce and Nikolov, Elenior (2011) Теоретско-аналитички осврт на одржувањето на неборбените моторни возила во АРМ. National Journal, Modern Macedonian Defense, 12 (21).

Petreski, Drage and Dimitrievski, Ljupce and Nikolov, Elenior (2011) Теоретско-аналитички осврт на одржувањето на неборбените моторни возила во АРМ. National Journal: Modern Macedonian Defense, 12 (21).

Petreski, Drage and Nikolov, Elenior and Iliev, Andrej and Bogdanoski, Mitko (2011) Dynamic investigation of pressure activated firing pin for mine-explosive devices. Proceedings of 4th Balkan Mining Congress, Ljubljana, Slovenia.

Petreski, Drage and Smileski, Rose and Babamov, Nake (2004) Карактеристики на современите хаубици. Современа македонска одбрана (10). pp. 145-159.

Ristova, Emilija and Gecevska, Valentina (2012) PLM and Business Perspectives of the New Paradigms in Information Technology. Annals of Faculty Engineering Hunedoara – International Journal of Engineering (10). pp. 307-311. ISSN 1584-2673

Ristova, Emilija and Gecevska, Valentina and Panov, Zoran (2012) Hybrid cloud computing challenges and mass customization. Proceedings of the 5th International Conference on Mass Customization and Personalization in Central Europe, MCP-CE 2012. pp. 198-202. ISSN 978-86-7892-432-3

Ristova, Emilija and Gecevska, Valentina and Panov, Zoran (2012) Hybrid cloud computing model and its mid market utilization. Proceedings MTM'12, 8/137. pp. 9-12. ISSN 1310-3946

Ristova, Emilija and Panov, Zoran (2010) An aproach of systems analysis of CRM and improving customer satisfaction through the management of perception of waiting. Natural Resources and Technology, 4 (1). pp. 199-205. ISSN 185-6966

Ristova, Emilija and Panov, Zoran and Gecevska, Valentina and Stefanovska Ceravolo, Ljubica (2012) The business perspective of cloud computing for small and medium enterprises. Proceedings of MTM'12, 8/137. pp. 33-37. ISSN 1310-3946

Ristova, Emilija and Stefanovski, Jovica and Stefanovska Ceravolo, Ljubica (2010) Attributes and Success Factors in Partner Relations Trough Supply Chains Jit Case Study for a Manufacturing Company. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), IV (6/2012). pp. 57-60. ISSN 1313-0226

Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko and Sovreski, Zlatko (2012) Influence of the number of the clutch engagement on the wearing of friction linings of clutches for motor vehicles. Technical Gazette, 19 (2). pp. 447-449. ISSN 1330-3651

Simeonov, Simeon and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko (2016) Dynamic Strain of Diaphragm Spring on Vehicles Friction Clutches Depending on the Spring Angle. International Journal of Scientific & Engineering Research, 7 (4). pp. 1448-1452. ISSN 2229-5518

Simeonov, Simeon and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko (2015) Impact of the Thread Diameter on the Tribological Parameters of the Friction Lining for the Motor Vehicles Clutches. International Journal of Scientific & Engineering Research, 6 (10). pp. 1101-1105. ISSN 2229-5518

Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko and Dzidrov, Misko and Dimitrov, Sasko (2015) Impact of graphite and sooton the tribological parameters of the friction lining for the motor vehicles clutches. Годишник на висше училище по телекомуникации и пощи, 1 (1). pp. 25-29. ISSN 2367-8437

Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko and Dzidrov, Misko and Milev, Sasko (2014) Фрикционе материјале за спојнице моторна возила. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 182-190. ISSN 978-86-912927-3-7

Simeonov, Simeon and Danev, Darko and Cvetkov, Slavco and Sovreski, Zlatko and Dimitrov, Sasko (2012) Optimization of diaphragme springs for clutches motor vehicles clutches. Proceedings of Electronic International Interdisciplinary Conference 2012. pp. 630-635. ISSN 1338-7871

Simeonov, Simeon and Sovreski, Zlatko and Cvetkov, Slavco and Dzidrov, Misko and Milev, Sasko (2015) Утицај дебљине чиниесте пружине у спојке моторних возила врз њихове напоне. Браничевског округа и енергетског комплекса Костолац, Костолац, мај 2015, 1 (S15). pp. 87-92. ISSN ISBN 978-86-919499-0-7

Sovreski, Zlatko and Causevski, Anton and Simeonov, Simeon and Mitev, Trajce and Tevdov, Vladimir (2012) Загаџивање животне средине емисијом загаџивача из термоенергетских постројења у Републици Македонији. Зборник радова, Пожаревац, Србија. pp. 221-227. ISSN ISBN 978-86-912927-1-3

Sovreski, Zlatko and Causevski, Anton and Tasevski, Angel and Simeonov, Simeon (2011) Strategy for the hydrogen transition. MOSATT 2011, 4. pp. 414-420. ISSN 1338-5232

Sovreski, Zlatko and Causevski, Anton and Tasevski, Angel and Sumanska, Marija and Ristova, Emilija (2012) Gas emission from thermal power plants in Macedona. Machines, Technologies, Materials (2/2012). pp. 30-34. ISSN 1313-0226

Sovreski, Zlatko and Dzidrov, Misko and Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko (2015) Енергетска ефикасност као енергетска карактеристика термалних система у републици Македонији. Међународно саветовање: Oдрживи развој Браничевског округа и енергетског комплекса Костолац, 1 (S15). pp. 67-69. ISSN ISBN 978-86-919499-0-7

Sovreski, Zlatko and Josheski, Dushko and Feta, Sinani and Tasevski, Angel and Tevdov, Vladimir (2012) Economic analysis of the investments for clean production in TPP. Proceedings of Electronic International Interdisciplinary Conference 2012. pp. 636-639. ISSN 1338-7871

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikola and Dzidrov, Misko and Pop-Andonov, Goran and Mitev, Trajce (2014) Развој и перпективе гасно турбинског погона у савремене возила. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 159-163. ISSN 978-86-912927-3-7

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikolce and Paspalovski, Toni and Pop-Andonov, Goran and Sinani, Feta (2013) Захтеви моторних уља од аспекте ограничења емисије штетних гасова. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2013, 300 (342). pp. 181-184. ISSN 978-86-912929-2-0

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikolce and Paspalovski, Toni and Simeonov, Simeon and Cvetkov, Slavco and Josheski, Dushko (2013) Енергетска ефикасност и економска оправданост индивидуалног станбеног објекта преко побољшања топлинске изолације. Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac, 2013, 300 (342). pp. 185-191. ISSN 978-86-912927-2-0

Sovreski, Zlatko and Minovski, Dragan and Causevski, Anton and Mojsoska, Natasa and Sovreski, Goran (2012) Утицај могучег увоџења нових електрана на ветар на електроенергетски систем у Републици Македонији. Zbornik radova, april 2012, Pozarevac, Srbija. pp. 156-163.

Sovreski, Zlatko and Simeonov, Simeon and Dzidrov, Misko and Cvetkov, Slavco and Dimitrov, Sasko and Kukuseva, Maja (2015) Заштита од пожара са економског аспекта у енергетици. Међународно саветовање: Oдрживи развој Браничевског округа и енергетског комплекса Костолац, 1 (S15). pp. 164-172. ISSN ISBN 978-86-919499-0-7

Sovreski, Zlatko and Simeonov, Simeon and Mitev, Trajce and Pop-Andonov, Goran and Dzidrov, Misko (2014) Технологии комбинованих циклуса за интегровање гасификације термоенергетских постојења у функции заштите животне средине. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 153-159. ISSN 978-86-912927-3-7

Sovreski, Zlatko and Spasovski, Orce and Stefanovska Ceravolo, Ljubica and Cekerovska, Marija and Mitev, Trajce (2011) Importance of Planning in the Protection of the Environment. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 5 (3/2011). pp. 18-20. ISSN 1313-0226

Stojkovski, Filip and Cekerovska, Marija and Filkoski, Risto and Stojkovski, Valentino (2016) Numerical Modelling of a Solar Chimney Power Plant. International Journal of Contemporary Energy, 2 (1). pp. 14-21. ISSN 2363-6440

Sumanska, Marija (2010) Споредба на ефикасноста на подвижен и неподвижен рамен сончев колектор. International symposium "ENERGEUCS 2010". pp. 625-636.

Temelkoska, Bratica and Cvetanoski, Radomir (2016) Primenjena metodologija za zamenu cevnih lukova na integralnim cevovodima u TE Oslomej. Tehnika, 71 (2). pp. 249-254. ISSN 0040-2176

Temelkoska, Bratica and Taskov, Ljubomir and Krstevska, Lidija (2008) Experimental evaluation of dynamic behavior of pipeline systems of thermal power plants exposed to seismic loads. International Journal of Structural Stability and Dynamics (IJSSD), 8 (2). pp. 339-355.

Trajcevski, Neven and Filiposki, Velimir and Kuzinovski, Mikolaj (2004) Personal computer interface for temperature measuring in the cutting process with turning. Proceedings, Faculty of Mechanical Engineering - Skopje, 23 (2). pp. 65-74. ISSN 0351-6067

Trajcevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 47-50. ISSN 1821-4932

Yamane, Hideaki and Cingoski, Vlatko and Kaneda, Kazufumi and Yamashita, Hideo and Nakayama, Michio (1997) Development and Verification of a System for 2D Analysis of a Coupled Magneto-Thermal Problems. 4th Japanese-Czech-Slovak Joint Seminar on Applied Electromagnetics. pp. 58-61.

Yamashita, Hideo and Cingoski, Vlatko (1994) The Hopfield Neural Network and its Application for direct Solution and inverse Optimization in Finite Element Analysis. Proceedinds of 3rd Japan-Hungary Joint Seminar on Applied Electromagnetics in Materials and Computational Technology, 38 (3). pp. 231-228.

Book Section

Koceska, Natasa and Koceski, Saso and Beomonte, Pierluigi and Durante, Francesco (2011) Gait Training using Pneumatically Actuated Robot System. In: Advances in Robot Navigation. Advances in Robot Navigation . InTech, pp. 224-238. ISBN 978-953-307-346-0

Kostadinova, Slavica and Panev, Ace and Cingoski, Vlatko (2015) Some Optimization Methods for Increasing the Energy Efficiency of the Water Supply Systems. In: Scientific Proceedings of the XII International Conference Machines, Technologies, Materials. Scientific-Technical Union of Mechanical Engineering, Varna, Bulgaria, pp. 92-95.

Minovski, Robert and Mitkovska-Trendova, Katerina and Jovanoski, Delco (2009) Deployment of finite-stage Markov decision processes for inventory management solutions in enterprise restructuring, Chapter 13. In: Intelligent production systems way to competitiveness and innovative engineering, Scientific Monography. Faculty of Mechanical Engineering, Skopje, Macedonia and Faculty of Mechanical Engineering, Maribor, Slovenia, Skopje, pp. 149-163. ISBN 978-9989-2701-4-7

Ristova, Emilija and Gecevska, Valentina and Kuzinovski, Mikolaj and Mirakovski, Dejan (2013) Cloud computing as business perspectives for product lifecycle management systems. In: Development of intelligent and innovative tools for production process engineering and sustainable management. University of Maribor, Faculty of Mechanical Engineering, pp. 176-184.

Temelkovski, Ordan and Gelev, Saso and Golubovski, Roman and Cingoski, Vlatko and Stefanov, Goce (2015) Application of Fuzzy Logic in Control Systems of Heat Substations. In: XX Megunarodni naucno-strucni skup " Informacione Tehnologije" - Sadasnjost i Buducnost. Informacione Tehnologije, 20 (20). Univerzitet Crne Gore, Elektrotehnicki fakultet, Podgorica, Crna Gora, pp. 172-175. ISBN 978-86-85775-16-1

Conference or Workshop Item

Andonov-Chento, Ilija and Cingoski, Vlatko and Nikolov, Igor (2011) Pump Storage in Macedonia - Opportunities beyond 2020. In: PowerGEN 2011, 7-9 June 2011, Milan, Italy. (Unpublished)

Cekerovska, Marija and Filkoski, Risto (2015) Comparative analysis of solar-tracking and static solar collector efficiency. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems SDEWES 2015, 27 Sept - 2 Oct 2015, Dubrovnik, Croatia.

Cekerovska, Marija and Filkoski, Risto (2015) Research of fixed and solar tracking liquid flat-plate solar collector with experimental and mathematical approach. In: International Conference and Workshop REMOO 2015 "Technological, Modelling and Experimental Achievements in Energy Generation Systems", 23-24 Sept 2015, Budva, Montenegro.

Cingoski, Vlatko (2002) Development of the First Gas-Fired Combined Cycle Heat and Power Plant in the Republic of Macedonia. In: Energy Forum 2002, 14-17 June 2002, Varna, Bulgaria.

Cingoski, Vlatko and Fustik, Vangel and Ivanova-Davidovic, Jasna and Iliev, Atanas and Stojkoski, Valentino and Cvetanov, Konstantin (2002) Rehabilitation, Operation and Transfer of the Small Hydro Power Plants in the Republic of Macedonia. In: Hydro Vision 2002 Conference, July 2002, Portland, Oregon.

Cingoski, Vlatko and Golubovski, Roman and Dambov, Risto (2014) Технички аспекти и анализа на можности за дистрибуирано производство и снабдување со електрична енергија кај изолирани енергетски потрошувачи. In: Energetika - 2014, 16-18 Oct 2014, Struga, Makedonija.

Cingoski, Vlatko and Hayakawa, Masahiro and Yamashita, Hideo (1998) On the Properties of Mixed Consistently and Non-Consistently First Order Edge Finite Elements. In: 8th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering and European TEAM Workshop Proceedings, Sept. 21-23, 1998, Graz, Austria.

Cingoski, Vlatko and Ivanova-Davidovic, Jasna and Mladenovska, Daniela (2011) Investment Incentives for Rehabilitation and Performance Improvement of TPP Bitola. In: Investment Conference, May, 2011, Vienna, Austria. (Unpublished)

Cingoski, Vlatko and Mikami, Mitsuru and Inoue, Kenji and Kaneda, Kazufumi and Yamashita, Hideo (1998) Computer Simulation and Operating Characteristics of a Three-Phase Brushless Synchronous Generator. In: 8th Biennial IEEE Conference on Electromagnetic Field Computation, 1998, Tucson.

Cingoski, Vlatko and Yamashita, Hideo and Aoi, Tatsufumi (1994) Analyses of Levitation Force in Induction Heating Furnace using 3D Edge Finite Element Method. In: The Third World Congress on Computational Mechanics, 1994.

Cvetkov, Slavco and Dimitrov, Sasko and Simeonov, Simeon and Sovreski, Zlatko and Dzidrov, Misko (2013) Influence of the position of an aperture derived in the initial material on the drawing workability of the cold rolled metal sheets. In: GV-CONF 2013, 8-12 Apr 2013, Zilina, Slovak Republic.

Danev, Darko and Kjosevski, Milan and Simeonov, Simeon (2013) Influence of the clutch engagement/disengagement to the friction lining lifetime in exploitation and laboratory conditions. In: 24th JUMV International Automotive Conference Science and Motorvehicles, 23-24 Apr 2013, Belgrade, Serbia.

Dimitrov, Sasko (2010) Numerical and experimental determination of the static characteristics of pilot operated pressure relief valves. In: Scientific Conference of the University of Rouse, Oct 2010, Rouse, Bulgaria.

Dimitrov, Sasko (2012) Static and dynamic characteristics of direct operated pressure relief valve, part 2. In: Scientific Conference of the University of Rouse, Oct 2012, Rouse, Bulgaria.

Dimitrov, Sasko (2011) Static characteristics of pilot operated pressure relief valves with compensating control piston. In: XVI Scientific Conference with international participation EMF 2011, Sept 2011, Sozopol, Bulgaria.

Dimitrov, Sasko (2013) Synthesis of dynamic characteristics of a pilot operated pressure relief valve with compensating control piston. In: XVIII Scientific Conference with international participation EMF2013, Sept 2013, Sozopol, Bulgaria.

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2011) Dynamic characteristics research of direct acting pressure relief valves through frequency response methods. In: Fluidna tehnika 2011 - Fluid Power 2011, 15-16 September 2011, Maribor, Slovenia.

Dzidrov, Misko and Cvetkov, Slavco and Stojanova, Teodora and Krstev, Aleksandar (2014) Influence of innovation and entrepreneurship on the economic growth. In: 6th International Conference on Mass Customization and Personalization in Central Europe (MCP-CE 2014), 24–26 Sept 2014, Novi Sad, Serbia.

Filkoski, Risto and Cekerovska, Marija (2014) Experimental and numerical study of a flat-plate solar energy collector performance. In: Proceedings of 7th Int. Conf. on Sustainable Energy & Environmental Protection SEEP, 23-25 Nov 2014, Dubai, UAE.

Filkoski, Risto and Cekerovska, Marija and Bunjaku, Florent (2016) Research and education in thermal and power engineering with support of CFD technology. In: International Conference REMOO 2016 "Science and Engineering for Reliable Energy", 18-20 May 2016, Budva, Montenegro.

Golubovski, Roman (2014) Технички аспекти на автоматизација на биаксијална вибро-платформа. In: Втора меѓународна научна конференција „Влијанието на научно – технолошкиот развиток во областа на правото, економијата, културата, образованието и безбедноста во Република Македонија“, 30-31 Oct 2014, Skopje, Macedonia.

Hadzievska, Milica and Cinceva, Elida and Cingoski, Vlatko (2002) Improving Macedonian's Power System through Rehabilitation of its Biggest HPPs. In: Proceedings of the Second IASTED International Conference, 25-28 June 2002, Crete, Greece.

Ivanova-Davidovic, Jasna and Cingoski, Vlatko and Pavleski, Vlatko and Saveski, Vasil (2004) Upgrading of the Spilje HPP. In: 13th Seminar on Hydropower plants, 22-24 Nov 2004, Vienna, Austria.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2013) Investigation on apparel waste management in Macedonia. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Jordeva, Sоnja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2016) Some characteristics of a new insulation structure from recycled apparel cutting waste. In: XXIV Congres of Chemists and Technologists of Macedonia, 11-14 Sept 2016, Ohrid, Macedonia.

Jovanovska, Vangelica and Sovreski, Zlatko and Sambevska, Katerina and Kocovska, Marija and Josheski, Dushko (2013) Komparativna analiza na parametre na cleaning in place системот (CIP) namenjen za čiščenje u mlečnoj industrji. In: Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 16 May 2013, Kostolac.

Komitovski, Mihail and Dimitrov, Sasko (2013) Transient response of a pilot operated pressure relief valve. In: XVIII Scientific Conference with international participation EMF2013, Sept 2013, Sozopol, Bulgaria.

Komitovski, Mihail and Dimitrov, Sasko (2012) Transient response process in hydraulic systems with direct operated pressure relief valves. In: XVII Scientific Conference with international participation EMF 2012, Sept 2012, Sozopol, Bulgaria.

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr (2008) Automation of experimental investigation of physical phenomena in the cutting process by machining with turning. In: XXXII Conference on production engineering SPMS 2008, 18-20 Sept 2008, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr and Tomov, Mite (2006) Monitoring system for investigation of the cutting forces in the machining with turning. In: Proceedings of the 9-th International Scientific Conference "MMA 2006 Flexible Technologies", 15-16 June 2006, Novi Sad, Srbija.

Kuzinovski, Mikolaj and Trajcevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Developing a data acquisition system for force and temperature measurement in the cutting process by machining with turning. In: Proceedings of the 8-th international scientific conference "New ways in manufacturing technologies 2006", 22-23 June 2006, Prešov, Slovak Republic.

Kuzinovski, Mikolaj and Trajcevski, Neven and Fita, Stanislaw and Tomov, Mite (2006) Monitoring system in the experimental investigations of the temperature in the cutting process by machining with turning. In: Proceedings of the 9-th CIRP international workshop on modeling of machining operations, 11-12 May 2006, Bled, Slovenia.

Minovski, Robert and Mitkovska-Trendova, Katerina and Jovanoski, Delco (2008) Application of finite-stage Markov decision processes in policy determination for employees’motivation. In: 8-th International Conference Advanced Manufacturing Operations, 18-20 June 2008, Kranevo, Albena, Bulgaria.

Mirakovski, Dejan and Krstev, Boris (2000) Design process and equipment selection for auxiliary ventilation system. In: Ninth International Symposium on mine planning and equipment selection, 6-9 November, 2000, Athens, Greece.

Mitkovska-Trendova, Katerina (2012) Маркови процеси на одлучување како поддршка на донесување одлуки при планирање воени операции. In: Научно-стручна конференција „Процесот на планирање и донесување одлуки во современите операции: Каде сме денес, а каде треба да бидеме утре?“, MILKON’12, 14 May 2012, Skopje, Macedonia.

Mitkovska-Trendova, Katerina (2013) Developming the methods of Markov analysis for application in reliability, security and maintenance engineering. In: Прва меѓународна научно-стручна конференција „Безбедносно инженерство при работа и пожар“, Меѓународен Славјански Универзитет „Гаврило Романович Державин“, 4-5 Oct 2013, Bitola, Republic of Macedonia.

Mitkovska-Trendova, Katerina and Minovski, Robert (2009) Application of N-Period Dynamic Inventory Model with Deterministic and Probabilistic Demand. In: Fulbright Academy of Science & Technology 4th Annual Conference, Small Places Can Change the World, 24-27 March 2009, Skopje, Macedonia. (Unpublished)

Mitkovska-Trendova, Katerina and Minovski, Robert and Jovanoski, Delco (2008) Finite-stage Markov decision processes in inventory management. In: ICEIRD 2008, 08-11 May 2008, Skopje, Ohrid, Macedonia.

Mitreva, Elizabeta and Taskov, Nako and Lazarovski, Zlatko (2014) The need for the design and implementation of TQM system for the airport services TAV Airports Holding, Macedonia. In: 8th International Quality Conference, 23 May 2014, 8th IQC, Center for Quality, Faculty of Engineering, University of Kragujevac.

Mitreva, Elizabeta and Zdrvkovska, Liljana and Taskov, Nako and Metodijeski, Dejan and Gjorshevski, Hristijan (2016) Quality management and practises in automotive parts production. In: XXIVInternational Scientific-Technical Conference Trans’16 Motauto, 29 June-02 July 2016, Varna, Bulgaria.

Petreski, Drage and Nikolov, Elenior and Iliev, Andrej and Bogdanoski, Mitko (2011) Dynamic Investigation of Pressure Activated Firing Pin for Mine-Explosive Devices. In: 4th Balkan Mining Congress, 18–20 Oct 2011, Ljubljana, Slovenia.

Pop Andonov, Goran and Stoilova, Svetla and Mirakovski, Dejan and Sovreski, Zlatko and Krstev, Dejan and Panov, Zoran (2013) Study of rail transport along the Trans-European corridors of the Republic Macedonia. In: Scientific conference on Aeronautics, Automotive and Railway Engineering and Technologies, 16-18 Oct 2013, Sofia, Bulgaria.

Simeonov, Simeon and Cvetkov, Slavco and Danev, Darko and Sovreski, Zlatko and Dimitrov, Sasko (2013) Impact of metal wire on the tribological parameters of the fiction lining. In: Proceedings in Global Virtual Conference, 8-12 Apr 2013, Zilina, Slovak Republic.

Soklevski, Toni and Sovreski, Zlatko (2013) The impact of logistics on organizational competitiveness. In: Scientific Conference 2013, 10-14 June 2013, Zilina, Slovakia.

Sovreski, Zlatko (2014) Идентификација, марканти и технологии на идентификатори на возилата од аспект на техничките експертизи – вештачења. In: 35 години јубилеј Биро за судски вештачења, 8-9 May 2014, Ohrid, Macedonia.

Sovreski, Zlatko (2014) Методи за откривање на идентификатори, фалсификување на идентификатори и осигурителни измами. In: 35 години јубилеј Биро за судски вештачења, 8-9 May 2014, Ohrid, Macedonia.

Sovreski, Zlatko (2014) Контрола на идентификатори и постапка при идентификација на возило. In: 35 години јубилеј Биро за судски вештачења, 8-9 May 2014, Ohrid, Macedonia.

Sovreski, Zlatko (2014) The traffic accident happened on the crossroad made of the main road Skopje-Ohrid with the str. Boulevard “Boris Kidric” in town Kicevo. In: Driver-Car Interaction & Safety, 10-12 Sept 2014, Decin, Czech Republic.

Sovreski, Zlatko and Mojsoska, Natasa and Paspalovski, Toni and Jovanovska, Vangelica and Jovanovski, Nikola and Pop-Andonov, Goran (2013) Analiza motornih ulja s pomoci infracrvene spektroskopie. In: Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, Kostolac 2013.

Sovreski, Zlatko and Tasevski, Angel and Minovski, Dragan and Mitev, Trajce and Sovreski, Goran (2012) Начини повезивањa на комбиновану јединицу мале снаге у системима за грејање/ Начини на конектирање на когенеративни единици со мала моќност во топлификациони системи. In: Zbornik radova, april 2012, Pozarevac, Srbija.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2013) Bio-based composites produced by conventional techniques using recycled polymer matrix. In: 8th International Conference of the Chemical Societies ICOSECS 8, 27-29 June 2013, Faculty of technology, Belgrade.

Stefanovska Ceravolo, Ljubica and Mirakovski, Dejan and Polenakovik, Radmil and Ristova, Emilija and Sovreski, Zlatko (2012) Indoor Air Quality (IAQ) as a Parameter Affecting Workplace Productivity. In: 9th International Congress "Machines, Technolоgies, Materials", 19-21.09.2012 , Varna, Bulgaria.

Stojanova, Teodora and Mirakovski, Dejan and Gecevska, Valentina and Simeonov, Simeon and Dzidrov, Misko (2014) Customer involvement into product creation process in Macedonian companies. In: 6th International Conference on Mass Customization and Personalization in Central Europe (MCP-CE 2014), 24–26 Sept 2014, Novi Sad, Serbia.

Stojkovski, Filip and Cekerovska, Marija and Filkoski, Risto and Stojkovski, Valentino (2015) Numerical modelling of a solar chimney power plant. In: International Conference and Workshop REMOO 2015 "Technological, Modelling and Experimental Achievements in Energy Generation Systems", 23-24 Sept 2015, Budva, Montenegro.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajcevski, Neven (2010) Analysis of the possible influence in determining of the roughness profile in real non-periodic surfaces by application of Gaussian and 2RC filters. In: XXXIII Naukowa Szkoła Obróbki Sciernej, Politechnika Łódzka, Wydział Mechaniczny, 8-10 Sept 2010, Lodz, Poland.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajcevski, Neven (2010) Investigation of the function and influence of Gaussian and 2RC filters to determine of roughness profile on real periodic surfaces. In: IV Konferencja Naukowa, Szkoła Obróbki Skrawaniem, Politechnika Łódzka, Wydział Mechaniczny, 6-8 Sept 2010, Lodz, Poland.

Tomov, Mite and Kuzinovski, Mikolaj and Trajcevski, Neven (2010) Function on Gaussian and 2RC filters to determine the roughness profile in real non-periodic and periodic surfaces. In: 14-th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2010, 11-18 Sept 2010, Mediterranean Cruise.

Trajcevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Trajcevski, Neven and Kuzinovski, Mikolaj and Filiposki, Velimir and Cichosz, Piotr (2004) Computer aided measurement of the temperature in the cutting process by machining with turning. In: Proceedings of the scientific conference with international participation "Manufacturing and menagement in 21-st century", 16-17 Sept 2004, Ohrid, Republic of Macedonia.

Book

Cingoski, Vlatko and MANU, (grupa avtori) (2010) Стратегија за развој на обновливите извори во Република Македонија до 2020 година. Македонска академија на науки и уметности (МАНУ), Скопје.

Dambov, Risto (2013) Дупчење и минирање. Универзитет „Гоце Делчев“, Штип. ISBN 978-608-4708-62-9

Mitreva, Elizabeta and Golomeova, Saska (2013) Системи за квалитет и стандарди. Универзитет „Гоце Делчев" - Штип, Технолошко - технички факултет, Пробиштип. ISBN 978-608-4708-38-4

Temelkoska, Bratica (2011) Мерење и мерни инструменти. Мерење - Метролошки карактеристики - Мерни инструменти - Високошколски учебници COBISS.MK-ID 89639434 . Универзитет „Гоце Делчев“ - Штип, Штип. ISBN 978-608-4504-18-4

Temelkoska, Bratica (2011) Спојување на материјали. Goce Delcev University, Stip, Macedonia. ISBN 978-608-4504-22-1

Project

Dimitrovski, Zoran and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko and Jakimovska, Svetlana and Stojanova, Teodora (2015) Воведување на нови стандарди за задолжителна инспекција на машините и опремата за апликација на пестициди. [Project] (Submitted)

First, Jiri and Holba, Stanislav and Ripa, Robin and Sovreski, Zlatko and Zahora, Miroslav (2012) Pasivní bezpečnost dopravních prostředků. [Project] (Submitted)

First, Jiri and Kadlecova, Jana and Sovreski, Zlatko (2012) Hygiena dopravních prostředků. [Project] (Submitted)

Gicev, Vlado and Golubovski, Roman and Popovski, Risto and Cernik - Anastasovska, Dragana and Risteska, Aleksandra and Zlatev, Zoran and Kokalanov, Vasko (2015) Распределба на сеизмичка енергија при интеракција објект-темел-почва. [Project] (Submitted)

Mirakovski, Dejan and Stoilova, Svetla and Panov, Zoran and Despodov, Zoran and Simeonov, Simeon and Pop-Andonov, Goran and Ristova, Emilija (2013) Techno-economic analysis of rail transport along the Trans-European corridor of the Republic of Macedonia. [Project] (Unpublished)

Simeonov, Simeon and Mirakovski, Dejan and Cvetkov, Slavco and Simonovski, Petar and Cekerovska, Marija and Milev, Sasko (2015) Примена на Mетодата на конечни елементи при пресметка на чиниести пружини на фрикциони спојки кај моторните возила. [Project]

Thesis

Atanasovska, Lidija (2015) Влијанието на СО, NO2 и SO2 на вработените во металуршка индустрија. Masters thesis, Goce Delcev University Stip.

Jordeva, Sonja (2010) Термофизиолошки комфор на плетенини за спортска облека во функција од структурните карактеристики и суровинскиот состав. Masters thesis, Универзитет „Св. Кирил и Методиј" -Скопје.

Jordeva, Sonja (2016) Истраживање и развој термоизолационог материјала од рециклираног отпада одевне индустрије. PhD thesis, Технолошко-технички факултет.

Maznovska, Elizabeta (2015) Математички методи во стохастичкото моделирање на некои од финансиските деривати. Masters thesis, Goce Delcev University Stip.

Penev, Valerij (2011) Location, Sources, Technology and Development Scenarios for the Treatment of Medical Waste. Masters thesis, University Goce Delcev Shtip.

Teaching Resource

Andronikov, Darko and Jordeva, Sonja (2016) Операции на пренос на маса - скрипта. ISBN 978-608-244-281-5.

Andronikov, Darko and Jordeva, Sonja (2016) Операции на пренос на маса-практикум. ISBN 978-608-244-282-2.

Cingoski, Vlatko (2013) Основи на CAD/CAM во електротехника - скрипта. ISBN 978-608-4708-70-4.

Jordeva, Sonja and Zezova, Silvana (2016) Практикум по Механичка текстилна технологија. ISBN 978-608-244-303-4.

This list was generated on Thu Sep 21 17:53:27 2017 CEST.