Items where Subject is "Mechanical engineering"

A

Alili, Agron and Krstev, Dejan (2019) Using SPSS for research and data analysis. Knowledge – International Journal, 32 (3).

Andonov-Chento, Ilija and Cingoski, Vlatko and Nikolov, Igor (2011) Pump Storage in Macedonia - Opportunities beyond 2020. In: PowerGEN 2011, 7-9 June 2011, Milan, Italy. (Unpublished)

Andronikov, Darko and Jordeva, Sonja (2016) Операции на пренос на маса - скрипта. ISBN 978-608-244-281-5.

Andronikov, Darko and Jordeva, Sonja (2016) Операции на пренос на маса-практикум. ISBN 978-608-244-282-2.

Atanasovska, Lidija (2015) Влијанието на СО, NO2 и SO2 на вработените во металуршка индустрија. Masters thesis, Goce Delcev University Stip.

B

Brahimaj, Frasher (2022) Придонес за унапредување на контурните минирања при формирање на завршни косини на патиштата и површинските копови. Doctoral thesis, UGD, Faculty of natural and technical sciences.

Brahimaj, Frasher and Dambov, Risto (2018) Impact of some physical - mechanical and structural characteristics of slope stability. In: VIII International Geomechanics Conference, 2–6 July 2018, Varna, Bulgaria.

Bundalevski, Slobodan and Cingoski, Vlatko and Gelev, Saso (2018) Determination of the Total Impulse of the Solid Rocket Motor by Using Two Mathematical Methods. In: 23rd International Scientific-Professional Conference on Information Technology (IT), 19-24 Feb 2018, Zabljak, Montenegro.

C

Capeska, Svetlana and Risteska, Svetlana and Samak, Samoil and Kostadinoska, Biljana (2017) Impact of the technological parameters for the production of UD prepreg. Knowledge - International Journal, Scientific Papers, 20 (5). ISSN 2545-4439

Cekerovska, Marija and Cekerovski, Todor and Serafimovski, Dalibor and Filkoski, Risto (2021) Optimization of flat solar collector based on the principle of entropy. In: XVIII International Scientific Congress Machines. Technologies. Materials, 10-13 March 2021, Borovets, Bulgaria.

Cekerovska, Marija and Cekerovski, Todor and Serafimovski, Dalibor and Filkoski, Risto (2021) Optimization of flat solar collector based on the principle of entropy. International Scientific Journal Industry 4.0 (1). pp. 18-21. ISSN 2534-997X

Cekerovska, Marija and Cekerovski, Todor and Srebrenkoska, Sara and Dimitrov, Sasko (2024) Performance and Design Optimization of Solar Collectors. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 28. pp. 470-476. ISSN 2602-3199

Cekerovska, Marija and Filkoski, Risto and Cekerovski, Todor and Srebrenkoska, Sara (2018) Numerical modeling of flat plate solar collectors with a CFD approach. (Balkan Journal of Applied Mathematics and Informatics BJAMI), 1 (2). pp. 45-51. ISSN 545-479X

Cekerovska, Marija and Filkoski, Risto and Cekerovski, Todor and Stefanov, Goce (2020) Оптимизација на рамен сончев колектор со користење на ексергетски метод. In: Меѓународна конференција „Енергетика 2020”, 01-02 Oct 2020, Struga.

Cekerovska, Marija and Filkoski, Risto (2015) Comparative analysis of solar-tracking and static solar collector efficiency. In: 10th Conference on Sustainable Development of Energy, Water and Environment Systems SDEWES 2015, 27 Sept - 2 Oct 2015, Dubrovnik, Croatia.

Cekerovska, Marija and Filkoski, Risto (2015) Efficiency of liquid flat-plate solar energy collector with solar tracking system. Thermal Science, 19 (5). pp. 1673-1684. ISSN 0354-9836

Cekerovska, Marija and Filkoski, Risto (2015) Research of fixed and solar tracking liquid flat-plate solar collector with experimental and mathematical approach. In: International Conference and Workshop REMOO 2015 "Technological, Modelling and Experimental Achievements in Energy Generation Systems", 23-24 Sept 2015, Budva, Montenegro.

Cekerovski, Todor and Serafimovski, Dalibor and Cekerovska, Marija (2019) Geo - Mapping opportunities for detecting different type of waste and transformation into eco-business solutions. Balkan Journal of Applied Mathematics and Informatics, 2 (1). pp. 7-14. ISSN 2545-4803

Cingoski, Vlatko and Yamashita, Hideo and Aoi, Tatsufumi (1994) Analysis of Eddy- Current Losses and Levitation Force inside Induction Furnace by 3-D Edge Finite Element Method. In: The Sixth Biennial IEEE Conference on Electromagnetic Field Computation, CEFC’94, July 5-7, 1994, Aix-les-Bains, France. (Unpublished)

Cingoski, Vlatko (2019) Основи на применета електротехника: За студенти од техничките факултети. Универзитет „Гоце Делчев“ - Штип. ISBN 978-608-244-623-3

Cingoski, Vlatko (2013) Основи на CAD/CAM во електротехника - скрипта. ISBN 978-608-4708-70-4.

Cingoski, Vlatko (2002) Development of the First Gas-Fired Combined Cycle Heat and Power Plant in the Republic of Macedonia. In: Energy Forum 2002, 14-17 June 2002, Varna, Bulgaria.

Cingoski, Vlatko and Fustik, Vangel and Ivanova-Davidovic, Jasna and Iliev, Atanas and Stojkoski, Valentino and Cvetanov, Konstantin (2002) Rehabilitation, Operation and Transfer of the Small Hydro Power Plants in the Republic of Macedonia. In: Hydro Vision 2002 Conference, July 2002, Portland, Oregon.

Cingoski, Vlatko and Golubovski, Roman and Dambov, Risto (2014) Технички аспекти и анализа на можности за дистрибуирано производство и снабдување со електрична енергија кај изолирани енергетски потрошувачи. In: Energetika - 2014, 16-18 Oct 2014, Struga, Makedonija.

Cingoski, Vlatko and Golubovski, Roman and Gelev, Saso and Stefanov, Goce and Klepov, Goran (2015) A Novel Method for Control and Operation of Induction Motors Implemented in Intermitted Working Regime for Musical Fountains. ETF Journal of Electrical Engineering, 21 (1). pp. 84-92. ISSN 0354-8653

Cingoski, Vlatko and Hayakawa, Masahiro and Yamashita, Hideo (1998) On the Properties of Mixed Consistently and Non-Consistently First Order Edge Finite Elements. In: 8th International IGTE Symposium on Numerical Field Calculation in Electrical Engineering and European TEAM Workshop Proceedings, Sept. 21-23, 1998, Graz, Austria.

Cingoski, Vlatko and Ivanova-Davidovic, Jasna and Mladenovska, Daniela (2011) Investment Incentives for Rehabilitation and Performance Improvement of TPP Bitola. In: Investment Conference, May, 2011, Vienna, Austria. (Unpublished)

Cingoski, Vlatko and MANU, (grupa avtori) (2010) Стратегија за развој на обновливите извори во Република Македонија до 2020 година. Македонска академија на науки и уметности (МАНУ), Скопје.

Cingoski, Vlatko and Mikami, Mitsuru and Inoue, Kenji and Kaneda, Kazufumi and Yamashita, Hideo (1998) Computer Simulation and Operating Characteristics of a Three-Phase Brushless Synchronous Generator. In: 8th Biennial IEEE Conference on Electromagnetic Field Computation, 1998, Tucson.

Cingoski, Vlatko and Nikolov, Igor (2013) Reduction of the development cost for SHPP utilizing a container-type mini hydropower plants. Proceedings of the Hydro 2013 - Promoting the Versatile Role of Hydro.

Cingoski, Vlatko and Tanurkov, Dimitar and Papasterevski, Kosta (2017) Extensive Boiler Rehabilitation at TPP Bitola - Lessons Learned. In: XXXIII Savetovanje Energeticara Srbije - Energetika, 28-31 March 2017, Zlatibor, Srbija.

Cingoski, Vlatko and Yamashita, Hideo and Aoi, Tatsufumi (1994) Analyses of Levitation Force in Induction Heating Furnace using 3D Edge Finite Element Method. In: The Third World Congress on Computational Mechanics, 1994.

Cvetkoska, Dijana (2021) Алгоритам за планирање на патека кај машини за автоматско полагање на препрег кои во својот дизајн имаат најмалку две редундантни оски. Doctoral thesis, Универзитет Гоце Делчев /Институтот за современи композити и роботика/.

Cvetkoska, Dijana and Dimovski, Igor and Samak, Samoil and Trompeska, Mirjana and Dukovski, Vladimir (2018) Using Constrained Multi-Optimization in Design of Composite for Filament Wound High Pressure Vessels. International Journal of Mathematics Trends and Technology ( IJMTT ), 61 (2). ISSN 2231 – 5373

Cvetkov, Slavco and Trajchevski, Neven and Dimitrov, Sasko (2022) Конвенционални и нумерички управувани металорезачки машини и помагала. Универзитет „Гоце Делчев“ – Штип. ISBN 978-608-244-907-4

Cvetkov, Slavco and Dimitrov, Sasko and Simeonov, Simeon and Sovreski, Zlatko and Dzidrov, Misko (2013) Influence of the position of an aperture derived in the initial material on the drawing workability of the cold rolled metal sheets. In: GV-CONF 2013, 8-12 Apr 2013, Zilina, Slovak Republic.

Cvetkov, Slavco and Kocov, Atanas (2014) Experimental analysis for defining forming limit diagram for thick sheets. Journal for Technology of Plasticity, 39 (2). pp. 47-54. ISSN 0354-3870-UDC 621.7

Cvetkov, Slavco and Kocov, Atanas (2011) Influence of the size of an hole derived in the initial material on the drawing workability of the cold-rolled metal sheets. 8th ICIT&MPT 2011, 368 (8). pp. 83-86.

Cvetkov, Slavco and Kocov, Atanas (2010) Influence of the surface quality due to a hole derived in initial material processing of cold sheets with drawing. Mechanical Engineering -Scientific Journal, 29 (1). pp. 47-51. ISSN 1857-5293

Cvetkov, Slavco and Kocov, Atanas (2012) Production of complex parts by deep drawing - deformation analysis. Journal for Technology of Plasticity, 37 (1). pp. 85-91. ISSN 0354-3870-UDC 621.7

Cvetkov, Slavco and Kocov, Atanas and Spiroski, Zoran (2012) Stress state in the process of deep drawing of sheet metal cover as a part of a clutch cover for commercial motor vehicles. Journal for Technology of Plasticity, 37 (2). pp. 143-152. ISSN 0354-3870

Cvetkov, Slavco and Simeonov, Simeon and Dimitrov, Sasko (2011) Influence of the placement of a previously derived ellipse shaped aperture in the starting material on the processing with drawing of the cold rolled sheet steels. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials) (7). pp. 41-43. ISSN 1313-0226

D

Dambov, Ilija and Dambov, Risto (2023) Construction of the pipeline trench for MHEC. XIV Стручно советување со меѓународно учество: Технологија на подземна и површинска експлоатација на минерални суровини Подекс – Повекс ’23 (14).

Dambov, Risto (2013) Дупчење и минирање. Универзитет „Гоце Делчев“, Штип. ISBN 978-608-4708-62-9

Dambov, Risto and Dambov, Ilija and Mircovski, Vojo (2017) Review of drilling and blasting parameters and some effects during blasting operations. Proceedings of the XIV International Conference of the Open and Underwater Mining of Minerals 03 – 07 July 2017, Varna, Bulgaria, 486 (1). pp. 109-114. ISSN 2535-0854

Dambov, Risto and Dambov, Ilija and Nikolic, Miroslav and Cacarov, Vladimir (2015) Seismic effects on the environmental related to blasting series. Proceedings of the XIII National conference with international participation of the open and underwater mining of minerals, 01–05 Sept 2015, Varna, Bulgaria.

Dambov, Risto and Doneva, Nikolinka and Dambov, Ilija (2017) Influence of the procedure of drilling to damage the drill bits. In: 10-то стручно советување на тема: Технологија на подземна и површинска експлоатација на минерални суровини Подекс – Повекс '17, 03-05 Nov 2017, Ohrid, Macedonia.

Dambov, Risto and Ivanovski, Dejan and Dambov, Ilija (2019) Примена на машинка „Can-blast“ за машинско полнење на мински дупчотини со патронирани експлозиви. In: XII Strucno sovetuvanje za rudarstvo, PODEX 2019, 01-03 Nov 2019, Strumica.

Dambov, Risto and Karanakova Stefanovska, Radmila and Dambov, Ilija (2010) Минерско-технички карактеристики и услови за примена на експлозивите од типот Nonex. PODEX 2010 - Пробиштип, 3/2010 (5). pp. 15-22. ISSN 978-9989-2921-2-3

Danev, Darko and Kjosevski, Milan and Simeonov, Simeon (2014) Increasing stiffness of diaphragm-spring fingers as a part of system approach improvement of friction clutch function. International Journal of Automobile Engineering, 4 (1). pp. 11-22. ISSN 2278–9413

Danev, Darko and Kjosevski, Milan and Simeonov, Simeon (2013) Influence of the clutch engagement/disengagement to the friction lining lifetime in exploitation and laboratory conditions. In: 24th JUMV International Automotive Conference Science and Motorvehicles, 23-24 Apr 2013, Belgrade, Serbia.

Danev, Darko and Kjosevski, Milan and Simeonov, Simeon (2013) Influence of the specific sliding work on tribological parametars of friction linings for heavy vehicle clutches. TTEM, 8 (4). pp. 1899-1903. ISSN 1840-1503

Danev, Darko and Simeonov, Simeon and Jordanovska, Vase (2016) Impact of basalt based thread linings on the tribological parameters of the clutch linings for motor vehicles. Tehnički vjesnik / Technical Gazette, Trg Ivane Brlić-Mažuranić 2, 35000 Slavonski Brod, 23 (4). pp. 1227-1232. ISSN 1848-6339 (Online)

Danev, Dragi and Kjosevski, Milan and Simeonov, Simeon (1999) Identification of the friction linings structure parameters with significant influence on heavy vehicles friction clutches working characteristics. Megunaroden naucno strucen skup.

Danev, Dragi and Kjosevski, Milan and Simeonov, Simeon (1999) Impact of string/impregnant ratio of the composition of the linings material on the tribological characteristics of the motor vehicles clutches. Megunardna naucno strucen skup.

Danev, Dragi and Kjosevski, Milan and Simeonov, Simeon (2001) Impact of the decarbonated layer on the dynamic persistence (durability) of diaphragm springs of motor vehicles clutches. Megunaroden naucen skup - Zbornik saopstenja.

Despodov, Zoran and Mijalkovski, Stojance and Adjiski, Vancho and Panov, Zoran (2014) Selection of Belt Conveyors Drive Units Number by Technical –Economical Analysis. Applied Mechanics and Materials, 683. pp. 189-195. ISSN 1662-7482

Despot, Katerina and Srebrenkoska, Sara and Sandeva, Vaska (2023) The role of artificial intelligence in automotive design. Knowledge – International Journal, 61 (3). pp. 423-429. ISSN 2545-4439

Dimeski, Dimko and Spaseska, Dijana and Smileski, Rose and Srebrenkoska, Vineta (2003) Влијание на притисокот на пресување врз трауматолошките ефекти и балистичките карактеристики кај унидиреакционални и бидирекционални композити врз база на полиетиленски влакна со ултрависока молекулска маса. Зборник на трудови од III Советување за дупчење и минирање со меѓународно учество, Рударско-геолошки факултет Штип, Охрид, 28-31 May 2003. pp. 125-133.

Dimitrov, Sasko and Komitovski, Mihail (2023) Theoretic research on transient process in hydraulic cylinder with cushioning device with constant gap. In: 12th International Scientific Conference “TechSys 2023” – Engineering, Technologies and Systems, 18-20 May 2023, Technical University of Sofia, Plovdiv Branch. (In Press)

Dimitrov, Sasko and Komitovski, Mihail (2024) Theoretic research on transient process in hydraulic cylinder with cushioning device with constant gap. AIP Conference Proceedings, 3078 (1). 060002-1-060002-7. ISSN 1551-7616

Dimitrov, Sasko and Krstev, Dejan (2022) Modelling and Simulation of the Transient Performance of a Direct Operated Pressure Relief Valve. Hidraulica - Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics, 3 (3). pp. 74-81.

Dimitrov, Sasko and Krstev, Dejan and Krstev, Aleksandar (2022) Matrix method for large scale systems analysis. Balkan Journal of Applied Mathematics and Informatics, 5 (2). pp. 99-106. ISSN 2545-4803

Dimitrov, Sasko and Srebrenkoska, Sara and Krstev, Dejan and Dzidrov, Misko and Cekerovska, Marija and Cekerovski, Todor (2024) Theoretical research on transient process in hydraulic cyl-inder with conical cushioning devices. In: The 12th International Conference on Machine and Industrial Design in Mechanical Engineering (KOD 2024), 23-26 May 2024, Balatonfüred, Hungary.

Dimitrov, Sasko and Weiler, Dennis and Petrov, Simeon (2023) Research on the influence of the volume of oil in front of the direct operated pressure relief valve on its transient performances. Balkan Journal of Applied Mathematics and Informatics, 6 (2). pp. 43-49. ISSN ISSN 2545-4803 on line

Dimitrov, Sasko (2013) Investigation of static characteristics of pilot operated pressure relief valves. Annals of Faculty Engineering Hunedoara – International Journal of Engineering, XI (2). pp. 201-206. ISSN 1584-2665

Dimitrov, Sasko (2010) Numerical and experimental determination of the static characteristics of pilot operated pressure relief valves. In: Scientific Conference of the University of Rouse, Oct 2010, Rouse, Bulgaria.

Dimitrov, Sasko (2014) Some geometric parameters impact to the static characteristics of a pilot operated pressure relief valves. In: 53-th Annual Scientific Conference of Angel Kanchev University of Ruse and Union of Scientists, Ruse, Bulgaria.

Dimitrov, Sasko (2012) Static and dynamic characteristics of direct operated pressure relief valve, part 2. In: Scientific Conference of the University of Rouse, Oct 2012, Rouse, Bulgaria.

Dimitrov, Sasko (2011) Static characteristics of pilot operated pressure relief valves with compensating control piston. In: XVI Scientific Conference with international participation EMF 2011, Sept 2011, Sozopol, Bulgaria.

Dimitrov, Sasko (2013) Synthesis of dynamic characteristics of a pilot operated pressure relief valve with compensating control piston. In: XVIII Scientific Conference with international participation EMF2013, Sept 2013, Sozopol, Bulgaria.

Dimitrov, Sasko (2014) Transient response of a pilot operated pressure relief valve with compensating control piston. Annals of Faculty Engineering Hunedoara – International Journal of Engineering, 12 (1). pp. 227-232. ISSN 1584-2673

Dimitrov, Sasko and Dimitrovski, Zoran (2018) CFD simulation of the flowing process through the short length sharp edged orifices. Poljoprivredna tehnika, 43 (1). pp. 28-34. ISSN 0554-5587

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2011) Dynamic characteristics research of direct acting pressure relief valves through frequency response methods. In: Fluidna tehnika 2011 - Fluid Power 2011, 15-16 September 2011, Maribor, Slovenia.

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2011) Experimental verification of a mathematical model of static characteristics of pilot operated pressure relief valves. Engineering Sciences, XLVIII (4).

Dimitrov, Sasko and Simeonov, Simeon and Cvetkov, Slavco (2015) Static Characteristics of the Orifices in a Pilot Operated Pressure Relief Valve. Hydraulica, Magazine of Hydraulics, Pneumatics, Tribology, Ecology, Sensorics, Mechatronics (2/2015). pp. 34-38. ISSN 1453-7303

Dimitrovski, Dame and Manev, Nikola and Dzinlev, Vanja (2023) Novel approach to model passenger cars’ urban exhaust emissions, air pollution impact: the case of the city of Skopje. Environmental and Engineering Journal, 22 (12). pp. 2045-2055. ISSN 1582-9596

Dimitrovski, Dame and Manev, Nikola and Jovanovikj, Eleonora and Uler-Zefikj, Monika (2022) Repurposed EV Batteries Integration in Smart Energy Grids to Facilitate a Greener Energy Sector. In: International Conference on Information Society and Technology, 13-16 March 2022, Kopaonik, Serbia.

Dimitrovski, Dame and Naumovski, Vladimir and Ivanovski, Filip and Manev, Nikola (2022) Environmental impact modelling for a Western Balkans mobility development scenario based on the electricity production energy mix. Journal of Environmental Protection and Ecology, 23 (3). pp. 1113-1122. ISSN 1311-5065

Dimitrovski, Zoran (2017) Inspection of pesticide application equipment. Journal of Agriculture and Plant Sciences, JAPS, 15 (1/2). ISSN 2545-4447

Dimitrovski, Zoran and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko and Jakimovska, Svetlana and Stojanova, Teodora (2015) Воведување на нови стандарди за задолжителна инспекција на машините и опремата за апликација на пестициди. [Project] (Submitted)

Dimitrovski, Zoran and Dimitrov, Sasko and Cvetkov, Slavco and Jakimovska, Svetlana (2017) An overview of the pesticide application equipment in Ovcepole region in Republic of Macedonia. In: Sixth European Workshop on Standardised Procedure for the Inspection of Sprayers in Europe SPISE 6, Barcelona.

Dimovski, Igor and Samak, Samoil and Trompeska, Mirjana and Hristoski, Martin and Dukovski, Vladimir (2017) Influence Of Each Of The Geometric Errors On The Total Displacement Error Of The Machine. In: IEEE EUROCON 2017, 17th International Conference on Smart Technologies .

Dimovski, Igor and Trompeska, Mirjana and Samak, Samoil and Dukovski, Vladimir and Cvetkoska, Dijana (2018) Algorithmic approach to geometric solution of generalized Paden–Kahan subproblem and its extension. International Journal of Advanced Robotic Systems (IJARS), 15 (1).

Dzidrov, Misko and Boev, Blazo and Zdravev, Zoran (2022) Goce Delcev University Stip drives seamless transition to remote learning during pandemic. In: Enlargement and Integration Workshop “Digital Transformation, Data and AI in the Western Balkans”, 9-11 Dec 2021, Skopje.

Dzidrov, Misko (2019) Barriers and challenges of transferring modern Project management principles in Western Balkan region. International Scientific Journal Science Business Society, Year 4 (1/2019). pp. 19-22. ISSN 2367-8380

Dzidrov, Misko (2018) Defining objectives and measures for quality assurance at university. International Journal of Scientific & Engineering Research, 9 (12). pp. 1776-1779. ISSN 2229-5518

Dzidrov, Misko (2017) Project Management as an instrument to support innovation for country development – Macedonia case study. International Journal of Scientific & Engineering Research, 8 (12). pp. 1809-1812. ISSN 2229-5518

Dzidrov, Misko (2018) Research on project management barriers in Western Balkan region. International Journal of Scientific & Engineering Research, 9 (11). pp. 1679-1683. ISSN 2229-5518

Dzidrov, Misko and Cvetkov, Slavco and Stojanova, Teodora and Krstev, Aleksandar (2014) Influence of innovation and entrepreneurship on the economic growth. In: 6th International Conference on Mass Customization and Personalization in Central Europe (MCP-CE 2014), 24–26 Sept 2014, Novi Sad, Serbia.

Dzidrov, Misko and Mirakovski, Dejan and Simeonov, Simeon (2013) Vehicle emission of greenhouse gases in municipality solid waste collecting and handling. 3rd International Conference, Waste Management and Climate Change. pp. 39-41.

Dzidrov, Misko and Mirakovski, Dejan and Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko (2013) Economic Freedom And Conflicts Tendencies In The Balkan Countries. International Journal of Scientific & Technology Research, 2 (10). pp. 47-50. ISSN 2277-8616

Dzidrov, Misko and Polenakovik, Radmil and Grupa, avtori (2018) Стратегија за развој на кластерите во Република Македонија 2018 - 2025. Министерството за економија на Република Македонија, Skopje.

Dzidrov, Misko and Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko and Stefanovska Ceravolo, Ljubica (2015) Study on the Importance of Knowledge, Innovation and Entrepreneurship on the Country’s Progress. International Journal of Scientific & Engineering Research, 6 (11). pp. 913-917. ISSN 2229-5518

Dzidrov, Misko and Stefanovska Ceravolo, Ljubica and Simeonov, Simeon (2016) From Efficiency to Innovation-Driven Economy with Stimulation of Innovation. International Journal of Scientific & Engineering Research, 7 (11). pp. 1144-1147. ISSN 2229-5518

F

Filkoski, Risto and Cekerovska, Marija (2014) Experimental and numerical study of a flat-plate solar energy collector performance. In: Proceedings of 7th Int. Conf. on Sustainable Energy & Environmental Protection SEEP, 23-25 Nov 2014, Dubai, UAE.

Filkoski, Risto and Cekerovska, Marija and Bunjaku, Florent (2016) Research and education in thermal and power engineering with support of CFD technology. In: International Conference REMOO 2016 "Science and Engineering for Reliable Energy", 18-20 May 2016, Budva, Montenegro.

First, Jiri and Holba, Stanislav and Ripa, Robin and Sovreski, Zlatko and Zahora, Miroslav (2012) Pasivní bezpečnost dopravních prostředků. [Project] (Submitted)

First, Jiri and Kadlecova, Jana and Sovreski, Zlatko (2012) Hygiena dopravních prostředků. [Project] (Submitted)

G

Gicev, Vlado and Golubovski, Roman and Popovski, Risto and Cernik - Anastasovska, Dragana and Risteska, Aleksandra and Zlatev, Zoran and Kokalanov, Vasko (2015) Распределба на сеизмичка енергија при интеракција објект-темел-почва. [Project] (Submitted)

Gjakovski, Ivan and Milev, Sasko and Brkovski, Dean and Gerasimovski, Aleksandar (2019) Procedure for Determination of the Calibration Curve of the Measurement Device Using the Method of Linear Regression. Scientific Technical Union Mechanical Engineering, Bulgaria, pp. 311-315.

Gjakovski, Ivan and Milev, Sasko and Brkovski, Dean and Gerasimovski, Aleksandar (2019) Procedure for determination of the calibration curve of the measurement device using the method of linear regression. International Scientific Journal "Machines. Technologies. Materials", 13 (10). pp. 425-429. ISSN 1314-507X; 1313-0226 print

Gjakovski, Ivan and Shareska, Violeta and Brkovski, Dean and Milev, Sasko (2018) The Impact of the Constructive Parameters of the Bumper over the Consequences Deriving from the Process of Collision. International Scientific Journal Trans & Motauto World, 3 (I). pp. 11-14. ISSN 2367-8399

Gjakovski, Ivan and Shareska-Gjakovska, Violeta and Brkovski, Dean and Milev, Sasko (2018) The Impact of the Constructive Parameters of the Bumper over the Consequences Deriving from the Process of Collision. Scientific Technical Union of Mechanical Engineering, Mart,2018, Borovets, Bulgaria, pp. 31-34.

Golomeov, Blagoj and Golomeova, Mirjana and Zendelska, Afrodita (2017) The use of geosynthetic materials in the design of tailings for the increased protection of the wider environment. In: 4th Congress on Dams, 28-30 Sept 2017, Struga, Macedonia.

Golomeova, Saska and Zhezhova, Silvana and Jordeva, Sonja and Maksimov, Stefan and Andronikov, Darko and Mojsov, Kiro (2021) Effect of the pandemic on the clothing industry in the easthern region of R. N. Macedonia. In: Contemporary trends and innovations in textile industry, Belgrade, Serbia.

Golubovski, Roman (2014) Технички аспекти на автоматизација на биаксијална вибро-платформа. In: Втора меѓународна научна конференција „Влијанието на научно – технолошкиот развиток во областа на правото, економијата, културата, образованието и безбедноста во Република Македонија“, 30-31 Oct 2014, Skopje, Macedonia.

H

Hadzievska, Milica and Cinceva, Elida and Cingoski, Vlatko (2002) Improving Macedonian's Power System through Rehabilitation of its Biggest HPPs. In: Proceedings of the Second IASTED International Conference, 25-28 June 2002, Crete, Greece.

I

Ivanova-Davidovic, Jasna and Cingoski, Vlatko and Pavleski, Vlatko and Saveski, Vasil (2004) Upgrading of the Spilje HPP. In: 13th Seminar on Hydropower plants, 22-24 Nov 2004, Vienna, Austria.

J

Jordeva, Sonja and Anusheva, Hristina and Golomeova, Saska and Zhezhova, Silvana and Dimitrijeva, Vanga and Mojsov, Kiro and Kertakova, Marija (2021) A cut marker for aircraft seat cover. Tekstilna industrija, 69 (2). pp. 40-47. ISSN 0040-2389

Jordeva, Sonja and Zhezhova, Silvana and Golomeova, Saska (2021) Technological process of finishing of the men's shirt and quality control. Knowledge International Journal, 45 (3). pp. 695-700. ISSN 2545-4439

Jordeva, Sonja and Zhezhova, Silvana and Golomeova, Saska and Risteski, Sanja and Dimitrijeva-Kuzmanoska, Vanga (2024) Final quality control of shirts. In: 7th International Scientific Conference Contemporary Trends and Innovations in Textile Industry – CT&ITI 2024, 19-20 Sept 2024, Belgrade.

Jordeva, Sonja and Zhezhova, Silvana and Golomeova, Saska and Risteski, Sanja and Tudzarovska Advokatov, Daniela and Dimitrijeva, Vanga (2024) The effect of different types of cut marker on the utilization of textile materials. Koža & Obuća, 73 (2). pp. 18-23. ISSN 1849-9767

Jordeva, Sonja (2010) Термофизиолошки комфор на плетенини за спортска облека во функција од структурните карактеристики и суровинскиот состав. Masters thesis, Универзитет „Св. Кирил и Методиј" -Скопје.

Jordeva, Sonja (2016) Истраживање и развој термоизолационог материјала од рециклираног отпада одевне индустрије. PhD thesis, Технолошко-технички факултет.

Jordeva, Sonja and Cortoseva, Sonja (2013) Uticaj sirovinskog sastava i strukturnih karakteristika dvoslojnih interlok pletenina na fizičko-mehanička svojstva. Zbornik radova X Simpozijum "Savremene tehnologije i privredni razvoj". pp. 154-161. ISSN 978-856-82367-99-4

Jordeva, Sonja and Cortoseva, Sonja and Kaloyanov, Nikola (2012) Termo-fiziološki komfor dvoslojnih pletenina. Tekstilna industrija, LX (4). pp. 11-19. ISSN 0040-2389

Jordeva, Sonja and Golomeova, Saska (2018) Технологија на изработка на облека 1 - практикум. ISBN 978-608-244-574-8.

Jordeva, Sonja and Golomeova, Saska (2018) Технологија на изработка на облека 1 - скрипта. ISBN 978-608-244-573-1.

Jordeva, Sonja and Golomeova, Saska (2018) Risk assessment in the workplace band-knife cutting machine. Knowledge - International Journal, Scientific Papers, 22 (4). pp. 995-1000. ISSN 2545-4439

Jordeva, Sonja and Tomovska, Elena and Mojsov, Kiro and Golomeova, Saska and Maksimov, Stefan (2018) Sustainability of the textile waste stream in Macedonia,. Advanced technologies, 7 (1). pp. 74-78. ISSN 2217-9720

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2014) Application of Apparel Cutting Waste as Insulation Material. Book of Proceedings 6th International Textile Conference.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2013) Investigation on apparel waste management in Macedonia. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2016) Some characteristics of a new insulation structure from recycled apparel cutting waste. In: XXIV Congres of Chemists and Technologists of Macedonia, 11-14 Sept 2016, Ohrid, Macedonia.

Jordeva, Sonja and Tomovska, Elena and Zafirova, Koleta (2016) The influence of structural variations on wool fabrics air permeability. Advanced technologies, 5 (2). pp. 79-83. ISSN 2217-9720

Jordeva, Sonja and Tomovska, Elena and Zhezhova, Silvana and Golomeova, Saska and Dimitrijeva, Vanga (2020) Textile waste management practices. Contemporary trends and innovations in the textile industry CT&ITI 2020. ISSN 677(082) / 687.1(082)

Jordeva, Sonja and Zhezhova, Silvana (2016) Практикум по Механичка текстилна технологија. ISBN 978-608-244-303-4.

Jordeva, Sonja and Zhezhova, Silvana (2017) Механичка текстилна технологија 1. ISBN 978-608-244-450-5.

Jordeva, Sonja and Zhezhova, Silvana and Golomeova, Saska (2019) Monitoring and quality control in the production of work uniforms for flight attendants. Knowledge - International Journal, Scientific Papers, 34 (3). pp. 737-743. ISSN 2545-4439

Jovanov, Tamara and Arsova, Monika (2023) Creative problem solving and generation of green (business) ideas. In: Creative problem solving and generation of green (business) ideas, Faculty of Economis - Shtip. (Unpublished)

Jovanovikj, Eleonora and Manev, Nikola and Dimitrovski, Dame (2024) Addressing the challenges to the introduction of Battery Energy Storage Systems in renewable energy utilisation systems. Journal of Energy Technology, 17 (3). pp. 26-38. ISSN 2463-7815

Jovanovska, Vangelica and Jovanovski, Nikola and Paspalovski, Toni and Sovreski, Zlatko (2013) Greenhouse gas emissions from transport source. GV- CONF 2013. pp. 247-249. ISSN 1339-2778

Jovanovska, Vangelica and Jovanovski, Nikola and Sovreski, Zlatko (2013) Input factors for Successful Implementation of Decentralized Bioenergy Projects in Practice. Machines Technologies Materials, 7 (8). pp. 8-13. ISSN 1313-0226

Jovanovska, Vangelica and Jovanovski, Nikola and Sovreski, Zlatko and Pop-Andonov, Goran and Sinani, Feta (2013) Fuels made from agricultural biomass - (biogas) alternative types(Alternativne vrste goriva iz poljoprivredne biomase - biogas). Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2013 (342). pp. 66-77. ISSN 978-86-912929-2-0

Jovanovska, Vangelica and Sovreski, Zlatko and Sambevska, Katerina and Kocovska, Marija and Josheski, Dushko (2013) Komparativna analiza na parametre na cleaning in place системот (CIP) namenjen za čiščenje u mlečnoj industrji. In: Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 16 May 2013, Kostolac.

K

Karolczak, Pawel and Kowalski, Maciej and Szmara, Adam and Trajchevski, Neven (2010) Application aiding rapid selection of cutting parameters on the example of aluminium alloys turning. Technological Engineering - International Scientific Journal, 7 (2). pp. 15-17. ISSN 1336-5967

Kazani, Ilda and Tomovska, Elena and Jordeva, Sonja (2021) Impact of the COVID-19 pandemic on the Albanian apparel manufacturing industry. In: 9-th International Textile Conference & 3rd International Conference on Engineering and Entrepreneurship,, 18-19 November, 2021, Tirana, Albania.

Koceska, Natasa and Koceski, Saso and Beomonte, Pierluigi and Durante, Francesco (2011) Gait Training using Pneumatically Actuated Robot System. In: Advances in Robot Navigation. Advances in Robot Navigation . InTech, pp. 224-238. ISBN 978-953-307-346-0

Koceska, Natasa and Koceski, Saso and Durante, Francesco and Beomonte, Pierluigi and Raparelli, Terenziano (2012) Control Architecture of a 10 DOF Lower Limbs Exoskeleton for Gait Rehabilitation. International Journal of Advanced Robotic Systems, 10. p. 1. ISSN 1729-8806

Kocevski, Zoran and Cingoski, Vlatko and Gelev, Saso (2022) Зголемување на енергетската ефикасност кај гасна печка преку рекуперација на топлина. Зборник на трудови - Меѓународна конференција ЗЕМАК 2022. pp. 269-278. ISSN 978 608-4764-14-4

Kochoski, Filip (2024) Развој на математички модели за дизајн на симетрични и асиметрични композитни делови. Doctoral thesis, University "Goce Delcev" - Stip.

Kokalanov, Vasko and Toneva Stojmenova, Verica and Stojkovic, Natasa (2024) Designing a numerical model of tooth from CT with volumetric mesh. In: XIII International conference on social and technological development – STED 2024, 06-09 June 2024, Trebinje, Republic of Srpska, B&H.

Kokalanov, Vasko and Gicev, Vlado and Golubovski, Roman (2018) Influence of the source square size on the accuracy of numerical simulation of wave propagation in half space. Journal of Geological Resource and Engineering , 6 (2). pp. 80-89. ISSN 2328-2193

Komitovski, Mihail and Dimitrov, Sasko (2013) Static and dynamic characteristics of direct operated pressure relief valves. Machine design, 5 (2). pp. 83-86. ISSN 1821-1259

Komitovski, Mihail and Dimitrov, Sasko (2019) Transient performance of a three-way pressure reducing valve. Machine design, 11 (2). pp. 53-58. ISSN 1821-1259

Komitovski, Mihail and Dimitrov, Sasko (2013) Transient response of a pilot operated pressure relief valve. In: XVIII Scientific Conference with international participation EMF2013, Sept 2013, Sozopol, Bulgaria.

Komitovski, Mihail and Dimitrov, Sasko (2012) Transient response process in hydraulic systems with direct operated pressure relief valves. In: XVII Scientific Conference with international participation EMF 2012, Sept 2012, Sozopol, Bulgaria.

Kostadinoska, Biljana (2021) Различни методи на импрегнација и полимеризација на смолен систем за производство на термореактивен ткаен препрег. Doctoral thesis, Универзитет Гоце Делчев /Институтот за современи композити и роботика/.

Kostadinoska, Biljana and Risteska, Svetlana and Samakoski, Blagoja (2021) Influence of the Process Parameters on Manufactured Prepregs by Solvent Impregnation. International Journal of Engineering Research & Technology (IJERT), 10 (01). ISSN 2278-0181

Kostadinoska, Biljana and Risteska, Svetlana and Samakoski, Blagoja and Capeska, Svetlana (2017) The compare of mechanical properties of composites at AFP technology with two technologies for curing. Knowledge - International Journal, 20 (5). pp. 2471-2479. ISSN 2545-4439

Kostadinoska, Biljana and Risteska, Svetlana and Stefanoska, Maja and Samakoski, Blagoja and Maneski, Gari (2015) Theoretical and Experimental Bending Properties of Composite Pipes. International Journal of Environmental, Chemical, Ecological, Geological and Geophysical Engineering, 9 (6).

Kostadinoska, Biljana and Risteska, Svetlana and Samakoski, Blagoja and Samak, Samoil and Romevski, Nikolce (2019) Influence of process parameters in production of resin film on kevlar fabric prepreg. In: ICAT'19 8th International Conference on Advanced Technologies.

Kostadinova, Slavica and Panev, Ace and Cingoski, Vlatko (2015) Some Optimization Methods for Increasing the Energy Efficiency of the Water Supply Systems. In: Scientific Proceedings of the XII International Conference Machines, Technologies, Materials. Scientific-Technical Union of Mechanical Engineering, Varna, Bulgaria, pp. 92-95.

Kostadinova, Slavica and Panev, Ace and Cingoski, Vlatko (2015) Some Optimization Methods for Increasing the Energy Efficiency of the Water Supply Systems. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 9 (11). pp. 7-10. ISSN 1313-0226

Krcheva, Violeta and Cekerovska, Marija (2022) Dependance on the required power of the electric motor on the CNC Spinner EL-510 lathe according to the depth of cut for turning and facing with CNMG 120408-PM 4325 tool insert. Machines. Technologies. Materials, 3 (3). pp. 194-196. ISSN 2535-0021

Krcheva, Violeta and Cekerovska, Marija and Dzidrov, Misko and Dimitrov, Sasko (2023) Impact of cutting conditions on the load on servo motors at a CNC lathe in the process of turning a clutch hub. BJAMI, 6 (2). pp. 51-62. ISSN 2545-4083

Krcheva, Violeta and Cekerovska, Marija and Srebrenkoska, Sara (2023) Simulation of toolpaths and program verification of a CNC lathe machine tool. Machines. Technologies. Materials., 2 (2). pp. 139-142. ISSN 2535-0021

Krcheva, Violeta and Dzidrov, Misko and Srebrenkoska, Sara and Krstev, Dejan (2023) Gantt chart as a project management tool that represents a clutch hub manufacturing process. Balkan Journal of Applied Mathematics and Informatics (BJAMI), 6 (2). pp. 67-78. ISSN 2545-4803

Krstev, Dejan and Krstev, Aleksandar (2022) Reverse logistics – possibility, expectation and sustainability perspectives. Natural Resources and Technology, 16 (1). pp. 89-96.

Krstev, Dejan and Polenakovik, Radmil (2018) Dynamic systems in the supply of pellets and distribution of the pellet production process. In: 4th Olympus International Conference on Supply Chains ( 4th Olympus ICSC). (Submitted)

Krstev, Dejan and Polenakovik, Radmil and Golomeova, Mirjana (2014) Vehicle routing and scheduling – The traveling salesman problem. Mechanical Engineering – Scientific Journal.

Krstev, Aleksandar and Krstev, Dejan and Polenakovik, Radmil and Krstev, Boris (2018) Decision Making Using Sequential Equation Modelling Applied for Pellet Production. In: IX International Conference of Information Technology and Development of Education 2018 (ITRO 2018), 29 June 2018, Zrenjanin, Republic of Serbia.

Krstev, Dejan and Pop-Andonov, Goran and Krstev, Aleksandar and Dzidrov, Misko and Krstev, Boris (2014) The intelligent transport systems – Risks and Benefits. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 22 (9). pp. 42-45. ISSN 1310 – 3946

Krstev, Dejan and Pop-Andonov, Goran and Krstev, Aleksandar and Dzidrov, Misko and Krstev, Boris and Pavlov, Sashe (2014) The multiple travelling salesman problem and vehicle routing problem for different domestic drinks. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 22 (3). pp. 96-98. ISSN 1310 – 3946

Krstev, Dejan and Pop-Andonov, Goran and Krstev, Aleksandar and Dzidrov, Misko and Krstev, Boris and Pavlov, Sashe (2014) The using of solver software and vehicle routing for the traveling salesman problem. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 22 (9). pp. 38-42. ISSN 1310 – 3946

Kuzinovski, Mikolaj and Cichosz, Piotr and Trajchevski, Neven and Tomov, Mite (2012) Computer aided engineering of the surface layer in the machining process by material removal. Systems, Journal of Transdisciplinary Systems Science, 16 (2). pp. 25-41. ISSN 1427-275X

Kuzinovski, Mikolaj and Cichosz, Piotr and Zebrowski, Henryk and Fita, Stanislaw and Tomov, Mite and Trajchevski, Neven and Tasev, Toni and Stojanovski, Zoran and Petrov, Aleksandar and Kostovski, Vladimir (2009) Разработка на методологија за едукација во областа на определувањето и проценката на неодреденоста како и грешките во мерењето. [Project]

Kuzinovski, Mikolaj and Dukovski, Vladimir and Vrtanovski, Gligorce and Zebrovski, Henrik and Josifovski, Vasko and Petrov, Aleksandar and Tomov, Mite and Trajchevski, Neven and Tasev, Toni and Fita, Stanislaw and Cichosz, Piotr (2009) Истражување на можностите и точноста на отсликување на геометриската структура на површината од површинскиот слој со контактни профилометри. [Project]

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2008) Automation of experimental investigation of physical phenomena in the cutting process by machining with turning. In: XXXII Conference on production engineering SPMS 2008, 18-20 Sept 2008, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 29-32. ISSN 1821-4932

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr and Tomov, Mite (2006) Monitoring system for investigation of the cutting forces in the machining with turning. In: Proceedings of the 9-th International Scientific Conference "MMA 2006 Flexible Technologies", 15-16 June 2006, Novi Sad, Srbija.

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Computer aided system for investigation of cutting forces and temperature in turning. Górnictwo Odkrywkowe (7-8). pp. 10-14. ISSN 0043-2075

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Developing a data acquisition system for force and temperature measurement in the cutting process by machining with turning. In: Proceedings of the 8-th international scientific conference "New ways in manufacturing technologies 2006", 22-23 June 2006, Prešov, Slovak Republic.

Kuzinovski, Mikolaj and Trajchevski, Neven and Filiposki, Velimir and Tomov, Mite and Cichosz, Piotr (2009) Monitoring system for automation of experimental researches in cutting. Mechanical Engineering – Scientific Journal, Proceedings, 28 (2). pp. 41-60. ISSN 1857 – 5293

Kuzinovski, Mikolaj and Trajchevski, Neven and Fita, Stanislaw and Tomov, Mite (2006) Monitoring system in the experimental investigations of the temperature in the cutting process by machining with turning. In: Proceedings of the 9-th CIRP international workshop on modeling of machining operations, 11-12 May 2006, Bled, Slovenia.

Kuzinovski, Mikolaj and Trajchevski, Neven and Tomov, Mite and Cichosz, Piotr (2010) Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process. Górnictwo Odkrywkowe, 3. pp. 148-153. ISSN 0043-2075

Kuzinovski, Mikolaj and Cichosz, Piotr and Zebrowski, Henryk and Fita, Stanislaw and Tomov, Mite and Trajchevski, Neven and Josifovski, Vasko and Tasev, Toni (2006) Метрологија на геометриските карактеристики во функција на лабораториите за калибрација, производните и едукативните процеси. [Project]

Kuzinovski, Mikolaj and Trajchevski, Neven and Tomov, Mite and Cichosz, Piotr and Skowronek, Hubert (2014) An approach for measurement uncertainty evaluation of cutting force in machining by turning. Mechanik (08/09). pp. 55-62. ISSN 0025-6552

Kuzinovski, Mikolaj and Trajchevski, Neven and Tomov, Mite and Cichosz, Piotr and Skowronek, Hubert (2014) An approach for measurement uncertainty evaluation of cutting force in machining by turning. In: VIII Konferencja Szkoły Obróbki Skrawaniem na temat Synergia nauki z przemysłem, 17-19 Sept 2014, Międzyzdroje – Szczecin.

Kuzinovski, Mikolaj and Zebrowski, Henryk and Cichosz, Piotr and Tomov, Mite and Trajchevski, Neven and Nedelkovski, Mirce and Jovchevski, Ljupco and Kevilovski, Ognen and Kitanovski, Kire and Tiricovski, Dragi and Gonovski, Blagoja and Josifovski, Vasko (2005) Развој и воведување на методологија за определување на цената на чинење на услугите и производите во функција од бараното ниво на квалитет. [Project]

M

Maksimov, Stefan and Jordeva, Sonja and Zhezhova, Silvana and Golomeova, Saska and Andronikov, Darko (2022) Qualitative and quantitative analysis of the pre consumer textile waste in North Macedonia. Advanced Technologies, 11 (1). pp. 88-92. ISSN 2406-2979

Maksimov, Stefan and Jordeva, Sonja and Zhezhova, Silvana and Mojsov, Kiro and Janevski, Aco (2022) Methodology for determining the quantity of textile waste from the cutting process. Tekstilna industrija. pp. 29-36. ISSN 0040-2389

Manev, Nikola and Dimitrovski, Dame (2023) Scenario – Based Approach to Determine Exhaust Pollutant Emissions From Heavy Duty Road Traffic Along a Segment of the Pan-European Corridor 10. City Health Journal, 4 (1). pp. 1-11. ISSN 2718-0328

Manev, Nikola and Dimitrovski, Dame and Markov, Zoran and Iliev, Viktor (2021) Environmental footprint of the heavy-goods vehicles of the future. In: International Conference of Ecosystems (ICE2021), 4-6 June 2021, Chicago, Illinois, USA.

Manev, Nikola and Dimitrovski, Dame and Mirakovski, Zoran and Jovchevski, Igor (2021) Economy and power tuning an ic engine for lower CO2 footprint. Mechanical Engineering Scientific Journal, 39 (1-2). pp. 33-46. ISSN 1857–5293

Manev, Nikola and Dimitrovski, Dame and Nikolov, Elenior (2023) Diesel Engine Modelling with the Use of Artificial Neural Networks to Decrease Simulation Processing Requirements. In: 26th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction, 8-11 Oct 2023, Thessaloniki, Greece.

Manev, Nikola and Dimitrovski, Dame and Nikolov, Elenior and Petreski, Drage and Markov, Zoran (2021) Evaluation of the air pollution impact of the heavy goods, diesel vehicles along, the A1 highway in North Macedonia. In: International Conference of Ecosystems (ICE2021), 4-6 June 2021, Chicago, Illinois, USA.

Manev, Nikola and Dimitrovski, Dame and Nikolov, Elenior and Petreski, Drage and Markov, Zoran and Iliev, Viktor (2021) Evaluation of the air pollution impact of heavy goods, diesel driven vehicles, along the A1 highway in North Macedonia. International Journal of Ecosystems and Ecology Science (IJEES), 11 (4). pp. 873-880. ISSN 2224-4980

Manev, Nikola and Jovanovikj, Eleonora and Dimitrovski, Dame (2022) The challenges and environmental justification of recycling Li-ion electric vehicles batteries. Mechanical Engineering Scientific Journal, 40 (2). pp. 85-92. ISSN 857–5293

Manev, Nikola and Jovchevski, Igor and Dimitrovski, Dame and Nikolov, Elenior (2024) Implications for the environmental-engineering compromise as a result of the aftermarket optimization of a diesel engine. Journal of Energy Technology, 17 (1). pp. 20-31. ISSN 2463-7815

Manev, Nikola and Nikolov, Elenior (2022) Lethality of contemporary Russian APFSDS rounds against NATO’s main battle tanks. Contemporary Macedonian Defence, 22 (42). pp. 115-123. ISSN 1409-8199

Maznovska, Elizabeta (2015) Математички методи во стохастичкото моделирање на некои од финансиските деривати. Masters thesis, Goce Delcev University Stip.

Mijajlovikj, Maja and Risteska, Svetlana and Srebrenkoska, Vineta and Kostadinoska, Biljana and Gogu, Julija (2017) Determination of activation energy of polymer composites using dynamic mechanical analysis. In: International Scientific Conference Contemporary Materials – Banja Luka. (Unpublished)

Mijajlovikj, Maja and Srebrenkoska, Sara and Cekerovska, Marija and Risteska, Svetlana and Srebrenkoska, Vineta (2018) Application of Taguchi method in production of samples predicting properties of polymer composites. Balkan Journal of Applied Mathematics and Informatics, 1 (1). pp. 79-84. ISSN 2545-479X/2545-4803 online

Milev, Sasko (2019) Impact of the Constructive Characteristics on the Load on the Daiphragm Springs of Motor Vehicle Clutches. Other thesis, Goce Delcev, University in Stip.

Milev, Sasko and Tasevski, Darko and Naestorovski, Blagoja (2022) Stress distribution along the cross section of the narrowest part of the diaphragm spring fingers. Balkan Journal of Applied Mathematics and Informatics (BJAMI), 5 (2). ISSN 2545-4803

Milev, Sasko and Tasevski, Darko and Shabani, Mevludin and Dimitrovski, Zoran and Rizov, Blaze (2023) Mechanical flexible couplings for torque transmission between two units. International Journal of Engineering Technology Research & Management, 07 (12). pp. 219-235. ISSN 2456-9348

Milev, Sasko and Tasevski, Darko and Shabani, Mevludin and Jovanov, Lazar and Dimitrovski, Zoran (2023) Impact of the Input Shaft Number of Revolutions on the Gear Pair Teeth Bending Stress in a Planetary Reducer. International Journal of Engineering Technology Research & Management, 7 (12). pp. 149-157. ISSN 2456-9348

Milev, Sasko and Simeonov, Simeon and Avramov, Nikola and Simonovski, Petar and Duskov, Gorgi and Simeonova, Elica (2018) Impact of Speed of Sliding of Friction Lining on the Tribological Parameters of Friction Clutches of Motor Vehicles. ISSN 2535 0021, 2 . Scientific Technical Union of Mechanical Engineering, September 2018, Varna, Bulgaria.

Milev, Sasko and Simeonov, Simeon and Nikola, Avramov and Petar, Simonovski and Duskov, Gorgi and Simeonova, Elica (2018) Impact of the Speed of Sliding of Friction Lining on the Tribological Parameters of Friction Clutches of Motor Vehicles. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), Bulgaria, 12 (9). ISSN 1313-0226

Milev, Sasko and Simeonov, Simeon and Simonovski, Petar and Avramov, Nikola and Dimitrov, Sasko and Cvetkov, Slavco (2017) The stress variation by changing the supporting point location in the motor vehicle clutch assembly. In: MTM Congres, 13 Sept 2017, Varna, Bugaria.

Milev, Sasko and Simeonov, Simeon and Simonovski, Petar and Avramov, Nikola and Milev, Sasko and Cvetkov, Slavco (2017) The stress variation by changing the supporting point location in the motor vehicle clutch assembley. Trans Motauto World (6). pp. 230-235. ISSN 2367-8399

Minovski, Robert and Mitkovska-Trendova, Katerina and Jovanoski, Delco (2008) Application of finite-stage Markov decision processes in policy determination for employees’motivation. In: 8-th International Conference Advanced Manufacturing Operations, 18-20 June 2008, Kranevo, Albena, Bulgaria.

Minovski, Robert and Mitkovska-Trendova, Katerina and Jovanoski, Delco (2009) Deployment of finite-stage Markov decision processes for inventory management solutions in enterprise restructuring, Chapter 13. In: Intelligent production systems way to competitiveness and innovative engineering, Scientific Monography. Faculty of Mechanical Engineering, Skopje, Macedonia and Faculty of Mechanical Engineering, Maribor, Slovenia, Skopje, pp. 149-163. ISBN 978-9989-2701-4-7

Mirakovski, Dejan and Lazarov, Darko and Srebrenkoska, Sara and Zendelska, Afrodita and Krcheva, Violeta (2024) Циркуларна и зелена економија базирана на соработка наука-бизнис. [Project] (Unpublished)

Mirakovski, Dejan and Krstev, Boris (2000) Design process and equipment selection for auxiliary ventilation system. In: Ninth International Symposium on mine planning and equipment selection, 6-9 November, 2000, Athens, Greece.

Mirakovski, Dejan and Stoilova, Svetla and Panov, Zoran and Despodov, Zoran and Simeonov, Simeon and Pop-Andonov, Goran and Ristova, Emilija (2013) Techno-economic analysis of rail transport along the Trans-European corridor of the Republic of Macedonia. [Project] (Unpublished)

Mitkovska-Trendova, Katerina (2012) Маркови процеси на одлучување како поддршка на донесување одлуки при планирање воени операции. In: Научно-стручна конференција „Процесот на планирање и донесување одлуки во современите операции: Каде сме денес, а каде треба да бидеме утре?“, MILKON’12, 14 May 2012, Skopje, Macedonia.

Mitkovska-Trendova, Katerina (2013) Developming the methods of Markov analysis for application in reliability, security and maintenance engineering. In: Прва меѓународна научно-стручна конференција „Безбедносно инженерство при работа и пожар“, Меѓународен Славјански Универзитет „Гаврило Романович Державин“, 4-5 Oct 2013, Bitola, Republic of Macedonia.

Mitkovska-Trendova, Katerina and Minovski, Robert (2009) Application of N-Period Dynamic Inventory Model with Deterministic and Probabilistic Demand. In: Fulbright Academy of Science & Technology 4th Annual Conference, Small Places Can Change the World, 24-27 March 2009, Skopje, Macedonia. (Unpublished)

Mitkovska-Trendova, Katerina and Minovski, Robert and Jovanoski, Delco (2008) Finite-stage Markov decision processes in inventory management. In: ICEIRD 2008, 08-11 May 2008, Skopje, Ohrid, Macedonia.

Mitkovska-Trendova,, Katerina and Minovski, Robert and Boshkovski, Dime (2014) Methodology for transition probabilities determination in a Markov decision processes model for quality-accuracy management. Journal of Engineering Management and Competitiveness (JEMC), 4 (2). pp. 59-67. ISSN 2217-8147 (online), 2334-9638 (print)

Mitreva, Elizabeta and Angelovski, Goranco and Filiposki, Oliver and Taskov, Nako and Gjorshevski, Hristijan (2016) Optimization of Business processes in Airport Services Company in Macedonia using the TQM Philosophy. TEM Journal, 5 (4). pp. 507-514. ISSN 2217-8309 / 2217-8333 (Online)

Mitreva, Elizabeta and Chepujnoska, Violeta and Chepujnoski, Gjorgji (2008) QC-CE-Pyramid model in the designing of the information system within a company. Macedonian Journal of Chemistry and Chemical Engineering, 27 (2). pp. 163-168. ISSN 1857 – 5552

Mitreva, Elizabeta and Golomeova, Saska (2013) Системи за квалитет и стандарди. Универзитет „Гоце Делчев" - Штип, Технолошко - технички факултет, Пробиштип. ISBN 978-608-4708-38-4

Mitreva, Elizabeta and Pancev, Donco and Gjorshevski, Hristijan and Filiposki, Oliver and Metodijeski, Dejan (2017) The implementation of the Quality Costs Methodology in the Public Transport Enterprise in Macedonia. TEM Journal, 6 (1). pp. 153-161. ISSN 2217-8309

Mitreva, Elizabeta and Taskov, Nako and Angeleski, Milan (2015) Approaches for the Advancement of Business Processes in a Company that Deals with Graphic Production. Actual Problems of Economics, 6 (168). pp. 190-201. ISSN 1993-6788

Mitreva, Elizabeta and Taskov, Nako and Lazarovski, Zlatko (2015) Application of the methodology for improving the business processes for the compamy for Airport services TAV Airports Holding, Macedonia. International Journal of Information, Business and Management, 7 (2). pp. 29-43. ISSN 2076-9202

Mitreva, Elizabeta and Taskov, Nako and Lazarovski, Zlatko (2014) The need for the design and implementation of TQM system for the airport services TAV Airports Holding, Macedonia. In: 8th International Quality Conference, 23 May 2014, 8th IQC, Center for Quality, Faculty of Engineering, University of Kragujevac.

Mitreva, Elizabeta and Zdrvkovska, Liljana and Taskov, Nako and Metodijeski, Dejan and Gjorshevski, Hristijan (2016) Quality management and practises in automotive parts production. In: XXIVInternational Scientific-Technical Conference Trans’16 Motauto, 29 June-02 July 2016, Varna, Bulgaria.

Mojsoska, Natasa and Spirovski, Mire and Sovreski, Zlatko and Dzidrov, Misko and Cekerovska, Marija (2020) 3 MW biogas power plant in Porodin Vilage, Republic Of N. Macedonia. In: Savetovanje u Kostolcu.

Mojsoska, Natasa and Stefanov, Goce and Sovreski, Zlatko (2012) Resistance testing analysis of stator winding for prophylastic tracking of large turbogenerators. EIIC 2012. pp. 613-616. ISSN 1338_7871

N

Nagakura, Satoshi and Noguchi, So and Kaneda, Kazufumi and Yamashita, Hideo and Cingoski, Vlatko (2001) Automatic Quadrilateral Mesh generation for FEM Using Dynamic Bubble System. Ieee transaction on magnetics, 37 (5). pp. 3522-3525.

Nagakura, Satoshi and Noguchi, So and Yamashita, Hideo and Cingoski, Vlatko (2002) Automatic Hexahedral Mesh Generalization Using Shape Recognition Technique and Tree Method. Ieee transitions on magnetics, 38 (2). pp. 416-420.

Namicev, Petar (2004) Ruralna arhitektura u Makedoniji. [Show/Exhibition]

Nedeva, Biljana and Krstev, Dejan (2019) Advanced warehouse technologies – perspectives and possibilities. Knowledge – International Journal, 30 (3).

Nikolov, Elenior (2004) Мобилност на копнените возила и примена на возила на електричен погон. National Journal: Modern Macedonian Defense, 4 (10).

Nikolov, Elenior and Korunoski, Dame and Angusev, Koco (2009) Анализа на динамиката и вибрациите кај моторите со внатрешно согорување. Proceedings of Abstracts from 9th Scientific Conference, ETAI-2009, ISBN 978-9989-2175-4-8. pp. 147-148.

Nikolov, Elenior and Petreski, Drage and Dimitrovski, Dame (2011) Компјутерски дизајн на клипови со мала тежина со примена на Алгор - ФЕА систем. National Journal: Modern Macedonian Defense, 12 (21).

O

Osterglava, Naim (2021) Mathematical Modeling of the Average Temperatures During Hard Turning. Doctoral thesis, Goce Delchev University in Shtip.

Ostergllava, Naim and Shabani, Mevludin and Simeonov, Simeon and Loku, Afrim and Pijar, Bura (2021) Prediction of Surface Roughness Through Roughness Parameter Rz, During Hard Turning of Steel C55(DIN) Using Mixed Ceramics MC2 (Al2O3+TiC). International Journal of Scientific & Engineering Research, 12 (4). pp. 615-621. ISSN 2229-5518

Ostergllava, Naim and Simeonov, Simeon and Shabani, Mevludin and Pira, Bujar and Loku, Afrim (2020) Statistical analysis of the effect of cutting parameters on the Average temperature in hard turning of steel C 55 (DIN). International Journal of Scientific & Engineering Research, 11 (6). pp. 90-99. ISSN 2229-5518

P

Panajotov, Martin and Cingoski, Vlatko (2019) The Economic Impact of Climate Change on the HPS Mavrovo. 19th International Conference on Thermal Sciences and Engineering in Serbia - SIMTERM 2019, 19. pp. 279-291. ISSN 978-86-6055-124-7

Paspalovski, Toni and Mojsoska, Natasa and Jovanovska, Vangelica and Jovanovski, Nikola and Sovreski, Zlatko (2013) Replacement (reconstruction) of the active steel end zone of the turbogenerator. GV-CONF 2013. pp. 659-663. ISSN 1339-2778

Penev, Valerij (2011) Location, Sources, Technology and Development Scenarios for the Treatment of Medical Waste. Masters thesis, University Goce Delcev Shtip.

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Нов метод за динамичко испитување на запалки за противтенковски мини. Зборник на трудови од 8-ми симпозиум за теоретска и применета механика, Скопје, 3-5 Oct 2002. pp. 105-111.

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Воспоставување критериуми за испитување запалки за противтенковски мини. Зборник на трудови од „Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија“, Охрид 2002. pp. 395-403.

Petreski, Drage and Dimitrievski, Ljupce and Nikolov, Elenior (2011) Теоретско-аналитички осврт на одржувањето на неборбените моторни возила во АРМ. National Journal, Modern Macedonian Defense, 12 (21).

Petreski, Drage and Dimitrievski, Ljupce and Nikolov, Elenior (2011) Теоретско-аналитички осврт на одржувањето на неборбените моторни возила во АРМ. National Journal: Modern Macedonian Defense, 12 (21).

Petreski, Drage and Nikolov, Elenior and Iliev, Andrej and Bogdanoski, Mitko (2011) Dynamic Investigation of Pressure Activated Firing Pin for Mine-Explosive Devices. In: 4th Balkan Mining Congress, 18–20 Oct 2011, Ljubljana, Slovenia.

Petreski, Drage and Nikolov, Elenior and Iliev, Andrej and Bogdanoski, Mitko (2011) Dynamic investigation of pressure activated firing pin for mine-explosive devices. Proceedings of 4th Balkan Mining Congress, Ljubljana, Slovenia.

Petreski, Drage and Smileski, Rose and Babamov, Nake (2004) Карактеристики на современите хаубици. Современа македонска одбрана (10). pp. 145-159.

Petrovski, Aleksandar and Radovanović, Marko and Milic, Aleksandar (2021) Analysis of Accuracy and Precision of Shooting with Home - Made Automatic Rifles Using the AHP Method. Scientific Technical Review, 71 (1). pp. 30-37. ISSN 2683-5770

Polenakovik, Radmil and Dzidrov, Misko (2017) Анализа на политиките и мерките за развој на претприемништвото и зголемување на вработеноста во Република Македонија - со посебен осврт на Ромската популација. Project Report. Национален центар за развој на иновации и претприемачко учење, Skopje.

Pop Andonov, Goran and Stoilova, Svetla and Mirakovski, Dejan and Sovreski, Zlatko and Krstev, Dejan and Panov, Zoran (2013) Study of rail transport along the Trans-European corridors of the Republic Macedonia. In: Scientific conference on Aeronautics, Automotive and Railway Engineering and Technologies, 16-18 Oct 2013, Sofia, Bulgaria.

R

Risteska, Aleksandra (2018) Input seismic energy in object during soil-foundation-object interaction. PhD thesis, Goce Delcev University, Stip.

Risteska, Svetlana and Trajkovska - Petkoska, Anka and Samak, Samoil and Drinovsky, Marian (2020) Annealing Effects on the Crystallinity of Carbon Fiber-Reinforced Polyetheretherketone and Polyohenylene Laminate Composites Manufactured by Laser Automatic Tape Placement. Materials Science (Medžiagotyra), 26 (3). ISSN 1392–1320

Risteska, Svetlana and Trajkovska Petkoska, Anka and Samak, Samoil and Drienovsky, Marian (2020) Annealing Effects on the Crystallinity of Carbon Fiber-Reinforced Polyetheretherketone and Polyohenylene Laminate Composites Manufactured by Laser Automatic Tape Placement. Materials Science (Medžiagotyra), 26 (3). ISSN 1392–1320

Ristova, Emilija and Gecevska, Valentina (2012) PLM and Business Perspectives of the New Paradigms in Information Technology. Annals of Faculty Engineering Hunedoara – International Journal of Engineering (10). pp. 307-311. ISSN 1584-2673

Ristova, Emilija and Gecevska, Valentina and Kuzinovski, Mikolaj and Mirakovski, Dejan (2013) Cloud computing as business perspectives for product lifecycle management systems. In: Development of intelligent and innovative tools for production process engineering and sustainable management. University of Maribor, Faculty of Mechanical Engineering, pp. 176-184.

Ristova, Emilija and Gecevska, Valentina and Panov, Zoran (2012) Hybrid cloud computing challenges and mass customization. Proceedings of the 5th International Conference on Mass Customization and Personalization in Central Europe, MCP-CE 2012. pp. 198-202. ISSN 978-86-7892-432-3

Ristova, Emilija and Gecevska, Valentina and Panov, Zoran (2012) Hybrid cloud computing model and its mid market utilization. Proceedings MTM'12, 8/137. pp. 9-12. ISSN 1310-3946

Ristova, Emilija and Panov, Zoran (2010) An aproach of systems analysis of CRM and improving customer satisfaction through the management of perception of waiting. Natural Resources and Technology, 4 (1). pp. 199-205. ISSN 185-6966

Ristova, Emilija and Panov, Zoran and Gecevska, Valentina and Stefanovska Ceravolo, Ljubica (2012) The business perspective of cloud computing for small and medium enterprises. Proceedings of MTM'12, 8/137. pp. 33-37. ISSN 1310-3946

Ristova, Emilija and Stefanovski, Jovica and Stefanovska Ceravolo, Ljubica (2010) Attributes and Success Factors in Partner Relations Trough Supply Chains Jit Case Study for a Manufacturing Company. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), IV (6/2012). pp. 57-60. ISSN 1313-0226

S

Samak, Samoil and Dimovski, Igor and Dukovski, Vladimir and Trompeska, Mirjana (2016) Volumetric calibration for improving accuracy of AFP/ATL machines. In: 7th International Scientific Conference on Defensive Technologies OTEH.

Samak, Samoil and Dimovski, Igor and Trompeska, Mirjana and Hristoski, Martin and Kochoski, Filip and Dukovski, Vladimir (2018) Computer-based simulation and validation of robot accuracy improvement method and its verification in robot calibration procedure. In: ETAI 2018 International Conference, ETAI Society of Macedonia, 20–22 Sept 2018, Struga, R.N.Macedonia.

Samak, Samoil and Dimovski, Igor and Trompeska , Mirjana and Dukovski, Vladimir (2016) Avoiding heavy computations in inverse calibration procedure for 7 DOF robot manipulator. Journal of Electrical Engineering and Informatiоn Technologies, 1 (2). ISSN 2545–4250

Shabani, Mevludin (2021) Mathematical Modeling of the Surface Roughness Parameters During Hard Turning. Doctoral thesis, Goce Delcev-University in Stip.

Shabani, Mevludin and Simeonov, Simeon and Pira, Bujar and Osterglavva, Naim (2021) Mathematical Modeling of the Surface Roughness Parameters Rp and Rv in Hard Turning of Steel C55(DIN) Using Mixed Ceramics MC 2 (AI2O3+TiC). International Journal of Scientific & Engineering Research, 12 (3). pp. 502-509. ISSN 2229-5518

Shabani, Mevludin and Simeonov, Simeon and Pira, Bujar and Ostergllava, Naim (2020) Statistical Analysis of the effect of cutting parameters on the surface roughness profile height parameter Ra in hard turning of steel C(55) DIN. International Journal of Scientific & Engineering Research, 11 (5). pp. 165-173. ISSN 2229-5518

Simeonov, Simeon and Simonovski, Petar and Mirakovski, Dejan and Milev, Sasko and Cekerovska, Marija (2017) Finite element analysis of stress of vehicles friction cluch diaphragm. In: XIV International Congress "Machines. Technolоgies. Materials.", 13-16 Sept 2017, Varna.

Simeonov, Simeon and Cvetkov, Slavco and Danev, Darko and Sovreski, Zlatko and Dimitrov, Sasko (2013) Impact of metal wire on the tribological parameters of the fiction lining. In: Proceedings in Global Virtual Conference, 8-12 Apr 2013, Zilina, Slovak Republic.

Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko and Sovreski, Zlatko (2012) Influence of the number of the clutch engagement on the wearing of friction linings of clutches for motor vehicles. Technical Gazette, 19 (2). pp. 447-449. ISSN 1330-3651

Simeonov, Simeon and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko (2016) Dynamic Strain of Diaphragm Spring on Vehicles Friction Clutches Depending on the Spring Angle. International Journal of Scientific & Engineering Research, 7 (4). pp. 1448-1452. ISSN 2229-5518

Simeonov, Simeon and Cvetkov, Slavco and Dzidrov, Misko and Sovreski, Zlatko and Dimitrov, Sasko (2015) Impact of the Thread Diameter on the Tribological Parameters of the Friction Lining for the Motor Vehicles Clutches. International Journal of Scientific & Engineering Research, 6 (10). pp. 1101-1105. ISSN 2229-5518

Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko and Dzidrov, Misko and Dimitrov, Sasko (2015) Impact of graphite and sooton the tribological parameters of the friction lining for the motor vehicles clutches. Годишник на висше училище по телекомуникации и пощи, 1 (1). pp. 25-29. ISSN 2367-8437

Simeonov, Simeon and Cvetkov, Slavco and Sovreski, Zlatko and Dzidrov, Misko and Milev, Sasko (2014) Фрикционе материјале за спојнице моторна возила. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 182-190. ISSN 978-86-912927-3-7

Simeonov, Simeon and Danev, Darko and Cvetkov, Slavco and Sovreski, Zlatko and Dimitrov, Sasko (2012) Optimization of diaphragme springs for clutches motor vehicles clutches. Proceedings of Electronic International Interdisciplinary Conference 2012. pp. 630-635. ISSN 1338-7871

Simeonov, Simeon and Mirakovski, Dejan and Cvetkov, Slavco and Simonovski, Petar and Cekerovska, Marija and Milev, Sasko (2015) Примена на Mетодата на конечни елементи при пресметка на чиниести пружини на фрикциони спојки кај моторните возила. [Project]

Simeonov, Simeon and Simonovski, Petar and Avramov, Nikola and Mirakovski, Dejan and Milev, Sasko and Cekerovska, Marija (2017) Finite element analysis of stress of vehicles friction clutch diaphragm spring. In: MTM Congres, 13 Sept 2017, Varna, Bugaria.

Simeonov, Simeon and Smonovski, Petar and Avramov, Nikola and Mirakovski, Dejan and Milev, Sasko and Cekerovska, Marija (2017) Finete element analysis of stress of vehicles friction clutch diaphragm spring. Machines, Technologies, Materials, 11 (8). pp. 384-389. ISSN 1313-0226

Simeonov, Simeon and Sovreski, Zlatko and Cvetkov, Slavco and Dzidrov, Misko and Dimitrov, Sasko (2016) Влијание на температурата врз триболошките параметри на фрикционите спојки за моторни возила. Predavanja po pozivu sa megjunarodnim ucescem, Savetovanje u Kostolcu. ISSN 978-86-912927-5-1

Simeonov, Simeon and Sovreski, Zlatko and Cvetkov, Slavco and Dzidrov, Misko and Milev, Sasko (2015) Утицај дебљине чиниесте пружине у спојке моторних возила врз њихове напоне. Браничевског округа и енергетског комплекса Костолац, Костолац, мај 2015, 1 (S15). pp. 87-92. ISSN ISBN 978-86-919499-0-7

Simonovski, Petar and Avramov, Nikola and Simeonov, Simeon and Milev, Sasko and Sovreski, Zlatko (2017) Impact of the Structural Forms of Diaphragm Spring Beginning on Dynamic Durability of Diaphragm Springs of Vehicle Clutches. International Journal of Sciences: Basic and Applied Research, 36 (3). pp. 291-300. ISSN 2307-4531

Soklevski, Toni and Sovreski, Zlatko (2013) The impact of logistics on organizational competitiveness. In: Scientific Conference 2013, 10-14 June 2013, Zilina, Slovakia.

Sovreski, Zlatko and Hristovska, Elizabeta and Jovanovska, Vangelica and Dzidrov, Misko and Sinani, Feta and Josevski, Zoran (2021) Енергетска ревизија пројеката фотонапонске (фотоволтајне) електране. In: Savetovanje u Kostolcu, 01 May 2021, Kostolac.

Sovreski, Zlatko (2014) Идентификација, марканти и технологии на идентификатори на возилата од аспект на техничките експертизи – вештачења. In: 35 години јубилеј Биро за судски вештачења, 8-9 May 2014, Ohrid, Macedonia.

Sovreski, Zlatko (2014) Методи за откривање на идентификатори, фалсификување на идентификатори и осигурителни измами. In: 35 години јубилеј Биро за судски вештачења, 8-9 May 2014, Ohrid, Macedonia.

Sovreski, Zlatko (2014) Контрола на идентификатори и постапка при идентификација на возило. In: 35 години јубилеј Биро за судски вештачења, 8-9 May 2014, Ohrid, Macedonia.

Sovreski, Zlatko (2014) The traffic accident happened on the crossroad made of the main road Skopje-Ohrid with the str. Boulevard “Boris Kidric” in town Kicevo. In: Driver-Car Interaction & Safety, 10-12 Sept 2014, Decin, Czech Republic.

Sovreski, Zlatko and Bouchner, Petr and Novotny, Stanislav and Dzidrov, Misko and Hristovska, Elizabeta (2019) Human-Machine Interaction of Electric Vehicle. In: ICEST 2019 54th international scientific conference on information, communication and energy systems and technologies, 27-29 June 2019, Ohrid, Macedonia.

Sovreski, Zlatko and Causevski, Anton and Simeonov, Simeon and Hristovska, Elizabeta and Jovanovska, Vangelica (2016) Емисија и имисијата на гасови во атмосферата од термоелектрани во Република Македонија. Predavanja po pozivu sa megjunarodnim ucescem, Savetovanje u Kostolcu. ISSN 978-86-912927-5-1

Sovreski, Zlatko and Causevski, Anton and Simeonov, Simeon and Mitev, Trajce and Tevdov, Vladimir (2012) Загаџивање животне средине емисијом загаџивача из термоенергетских постројења у Републици Македонији. Зборник радова, Пожаревац, Србија. pp. 221-227. ISSN ISBN 978-86-912927-1-3

Sovreski, Zlatko and Causevski, Anton and Tasevski, Angel and Simeonov, Simeon (2011) Strategy for the hydrogen transition. MOSATT 2011, 4. pp. 414-420. ISSN 1338-5232

Sovreski, Zlatko and Causevski, Anton and Tasevski, Angel and Sumanska, Marija and Ristova, Emilija (2012) Gas emission from thermal power plants in Macedona. Machines, Technologies, Materials (2/2012). pp. 30-34. ISSN 1313-0226

Sovreski, Zlatko and Dzidrov, Misko and Hristovska, Elizabeta and Jovanovska, Vangelica and Mojsoska, Natasa and Josevski, Zoran (2020) System of care for operating fluids and fillings of machines in energy and industrial company. In: Savetovanje u Kostolcu.

Sovreski, Zlatko and Dzidrov, Misko and Hristovska, Elizabeta and Jovanovska, Vangelica and Mojsoska, Natasa and Sinani, Feta (2020) Analysis of engine oils in modern diesel engines. In: Savetovanje u Kostolcu.

Sovreski, Zlatko and Dzidrov, Misko and Simeonov, Simeon and Cvetkov, Slavco and Dimitrov, Sasko (2015) Енергетска ефикасност као енергетска карактеристика термалних система у републици Македонији. Међународно саветовање: Oдрживи развој Браничевског округа и енергетског комплекса Костолац, 1 (S15). pp. 67-69. ISSN ISBN 978-86-919499-0-7

Sovreski, Zlatko and Josheski, Dushko and Feta, Sinani and Tasevski, Angel and Tevdov, Vladimir (2012) Economic analysis of the investments for clean production in TPP. Proceedings of Electronic International Interdisciplinary Conference 2012. pp. 636-639. ISSN 1338-7871

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikola and Dzidrov, Misko and Pop-Andonov, Goran and Mitev, Trajce (2014) Развој и перпективе гасно турбинског погона у савремене возила. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 159-163. ISSN 978-86-912927-3-7

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikolce and Paspalovski, Toni and Pop-Andonov, Goran and Sinani, Feta (2013) Захтеви моторних уља од аспекте ограничења емисије штетних гасова. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2013, 300 (342). pp. 181-184. ISSN 978-86-912929-2-0

Sovreski, Zlatko and Jovanovska, Vangelica and Jovanovski, Nikolce and Paspalovski, Toni and Simeonov, Simeon and Cvetkov, Slavco and Josheski, Dushko (2013) Енергетска ефикасност и економска оправданост индивидуалног станбеног објекта преко побољшања топлинске изолације. Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac, 2013, 300 (342). pp. 185-191. ISSN 978-86-912927-2-0

Sovreski, Zlatko and Minovski, Dragan and Causevski, Anton and Mojsoska, Natasa and Sovreski, Goran (2012) Утицај могучег увоџења нових електрана на ветар на електроенергетски систем у Републици Македонији. Zbornik radova, april 2012, Pozarevac, Srbija. pp. 156-163.

Sovreski, Zlatko and Mojsoska, Natasa and Paspalovski, Toni and Jovanovska, Vangelica and Jovanovski, Nikola and Pop-Andonov, Goran (2013) Analiza motornih ulja s pomoci infracrvene spektroskopie. In: Odrzivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, Kostolac 2013.

Sovreski, Zlatko and Simeonov, Simeon and Dzidrov, Misko and Cvetkov, Slavco and Dimitrov, Sasko and Kukuseva, Maja (2015) Заштита од пожара са економског аспекта у енергетици. Међународно саветовање: Oдрживи развој Браничевског округа и енергетског комплекса Костолац, 1 (S15). pp. 164-172. ISSN ISBN 978-86-919499-0-7

Sovreski, Zlatko and Simeonov, Simeon and Hristovska, Elizabeta and Jovanovska, Vangelica and Dzidrov, Misko (2016) Одређивања утицаја адитива у уља на раду мотора са унутрашњим сагоревањем преко експерименталних тестирања. Predavanja po pozivu sa megjunarodnim ucescem, Savetovanje u Kostolcu. ISSN 978-86-912927-5-1

Sovreski, Zlatko and Simeonov, Simeon and Mitev, Trajce and Pop-Andonov, Goran and Dzidrov, Misko (2014) Технологии комбинованих циклуса за интегровање гасификације термоенергетских постојења у функции заштите животне средине. Odrzlivi razvoj grada Pozarevca i energetskog kompleksa Kostolac - Zbornik Radova, 2014 (279). pp. 153-159. ISSN 978-86-912927-3-7

Sovreski, Zlatko and Sinani, Feta and Simeonov, Simeon and Hristovska, Elizabeta and Todorovski, Ljupco (2017) Application of mathematical modeling with the help of a specialized licensed Virtual Crash 3.0 for a specific traffic accident in Republic of Macedonia. In: Drugi Kongres Udruženje Sudskih Vještaka Crne Gore, Oct 2017, Budva, Montenegro.

Sovreski, Zlatko and Spasovski, Orce and Stefanovska Ceravolo, Ljubica and Cekerovska, Marija and Mitev, Trajce (2011) Importance of Planning in the Protection of the Environment. International Journal for Science, Technics and Innovations for the Industry MTM (Machines, Tecnologies, Materials), 5 (3/2011). pp. 18-20. ISSN 1313-0226

Sovreski, Zlatko and Talevski, Nikolce and Josevski, Zoran and Hristovska, Elizabeta and Dzidrov, Misko and Sinani, Feta (2019) Global logistic perspectives about quality of the concept for management of the communal waste in the environment. In: Savetovanje u Kostolcu.

Sovreski, Zlatko and Talevski, Nikolce and Josevski, Zoran and Hristovska, Elizabeta and Jovanovska, Vangelica and Dzidrov, Misko (2019) Logistic aspects of the activities of the rolling stock of the public communal company Prilep 2017. In: Savetovanje u Kostolcu.

Sovreski, Zlatko and Tasevski, Angel and Minovski, Dragan and Mitev, Trajce and Sovreski, Goran (2012) Начини повезивањa на комбиновану јединицу мале снаге у системима за грејање/ Начини на конектирање на когенеративни единици со мала моќност во топлификациони системи. In: Zbornik radova, april 2012, Pozarevac, Srbija.

Srebrenkoska, Sara (2016) Примена на шест сигма методологија и дизајн на експерименти за подобрување на индустриски процес за добивање на композитни цевки. Masters thesis, Ss. Cyril and Methodius University in Skopje.

Srebrenkoska, Sara (2018) Роботизирани AFP/ATL процеси за производство на делови од композитни материјали. In: Докторски семинар и годишна конференција, УКИМ, Скопје. (Unpublished)

Srebrenkoska, Sara (2021) Роботизирани процеси за автоматско полагање на композитни влакна/ленти (AFP/ATL) при производство на делови од композитни материјали. Doctoral thesis, Ss. Cyril and Methodius University in Skopje.

Srebrenkoska, Sara (2019) Истражувања на технолошките параметри за автоматизиран ATL процес со примена на ласер. In: Годишна конференција за докторски студии, УКИМ, Скопје.

Srebrenkoska, Sara (2018) Basis of the composite materials and their production technologies. In: Erasmus conference, 14-18 May 2018, Bucharest, Romania. (Unpublished)

Srebrenkoska, Sara (2019) CA18125 - Advanced Engineering and Research of aeroGels for Environment and Life Sciences (AERoGELS). [Project] (In Press)

Srebrenkoska, Sara (2021) CA20101 - Plastics monitoRIng detectiOn RemedIaTion recoverY (PRIORITY). [Project] (In Press)

Srebrenkoska, Sara (2022) COST Action CA21155 Advanced Composites under HIgh STRAin raTEs loading: a route to certification-by-analysis (HISTRATE). [Project] (In Press)

Srebrenkoska, Sara (2023) COST Action CA22132, Open Network on DEM Simulations (ON-DEM). [Project] (In Press)

Srebrenkoska, Sara (2019) Влијание на технолошките параметри на процесот кај роботизираните LATP (Laser Assisted Automated Tape Placement) технологии врз карактеристиките на композитот. In: Школа за докторски студии, УКИМ.

Srebrenkoska, Sara (2019) Overview of the research of laser assisted automate tape laying process for production of advanced composite materials for self-healing. In: PhD Students’ and Early Career Investigators’ Meeting – Self-healing concrete structures, March, 7th -8th 2019, University of Novi Sad, Faculty of Technology, Novi Sad, Serbia. (Unpublished)

Srebrenkoska, Sara and Apostolova, Aleksandra and Dzidrov, Misko and Krstev, Dejan (2023) Application of Analytical Hierarchy Process (AHP) in the selection of a flexible production system. Engineering World, 5. pp. 138-143. ISSN 2692-5079

Srebrenkoska, Sara and Avramovska, Ivana and Krcheva, Violeta (2023) Analysis of Steel Construction, Construction of a Canopy in the Function of a Facility for Light Industry. International Journal of Research Publication and Reviews (IJRPR), 4 (10). pp. 216-220. ISSN 2582-7421

Srebrenkoska, Sara and Cekerovska, Marija (2022) Automated fiber placement technology overview. Contemporary Trends and Innovations in the Textile Industry. pp. 411-417. ISSN ISBN-978-86-900426-4-7

Srebrenkoska, Sara and Cekerovska, Marija (2022) Defect characteristics using automated fiber plasement. Contemporary Trends and Innovations in the Textile Industry. pp. 126-133. ISSN ISBN-978-86-900426-4-7

Srebrenkoska, Sara and Dukovski, Vladimir (2022) Defect formation in automated fiber placement technology. Tekstilna industrija, 70 (4). pp. 24-29. ISSN 0040-2389

Srebrenkoska, Sara and Dukovski, Vladimir and Risteska, Svetlana (2020) Influence of the Process Parameters on Laser - Assisted Automated Tape Placement Process. International Journal of Engineering Research & Technology (IJERT), 9 (11). pp. 638-644. ISSN 2278-0181

Srebrenkoska, Sara and Dukovski, Vladimir and Risteska, Svetlana (2019) Laser assisted automated tape laying process for production of composite laminates. Union of Engineers and Textile Technicians of Serbia, Belgrade, Serbia, May, 2019. pp. 107-112. ISSN ISBN 978-86-900426-1-6

Srebrenkoska, Sara and Dukovski, Vladimir and Risteska, Svetlana (2020) The designing of laser assisted automated tape laying process for obtaining of the thermoplastic composite parts. Contemporary trends and innovations in the textile industry CT&ITI 2020 Proceedings. pp. 339-346. ISSN ISBN 978-86-900426-2-3

Srebrenkoska, Sara and Kochoski, Filip and Srebrenkoska, Vineta and Risteska, Svetlana and Kotynia, Renata (2023) Effect of Process Parameters on Thermal and Mechanical Properties of Filament Wound Polymer-Based Composite Pipes. Polymers 2023 Special Issue Development in Thermosetting Polymers, 15 (13).

Srebrenkoska, Sara and Kochoski, Filip and Srebrenkoska, Vineta and Risteska, Svetlana and Kotynia, Renata (2023) Effect of Process Parameters on Thermal and Mechanical Properties of Filament Wound Polymer-Based Composite Pipes. Polymers, 15 (13). ISSN 2073-4360

Srebrenkoska, Sara and Kocov, Atanas and Minovski, Robert (2016) Six sigma and design of experiments for improving the production of composite pipes. Journal for Technology of Plasticity, 41 (2). ISSN 0354-3870

Srebrenkoska, Sara and Krstev, Dejan (2023) Technical and Economic Analysis of Different Types of Composite Pipes Compared to Conventional Pipes for the Same Purpose. Engineering Technology Open Access Journal (ETOAJ), 5 (3). ISSN 2641-8185

Srebrenkoska, Sara and Krstev, Dejan and Cekerovska, Marija (2023) Analysis of an inventory management model in a manufacturing process based on material requirements planning (MRP). In: 3rd International Conference on Innovative Academic Studies ICIAS 2023, 26-28 Sept 2023, Konya, Turkey.

Srebrenkoska, Sara and Krstev, Dejan and Cekerovska, Marija (2023) Analysis of an inventory management model in a manufacturing process based on material requirements planning (MRP). International Journal of Advanced Natural Sciences and Engineering Researches (IJANSER), 7 (9). pp. 91-93. ISSN 2980-0811

Srebrenkoska, Sara and Krstev, Dejan and Dimitrov, Sasko and Risteska, Aleksandra (2024) Designing Technological Process for Composite Pipe Production Using Software. Advances in Robotics & Mechanical Engineering, 4 (3). pp. 593-600. ISSN 2643-6736

Srebrenkoska, Sara and Krstev, Dejan and Dimitrov, Sasko and Tanceva, Nevena (2023) Application of Artificial Intelligence in Mechanical Engineering. Journal of Multidisciplinary Engineering Science and Research (JMESR), 2 (10). pp. 248-250. ISSN 2632-1017

Srebrenkoska, Sara and Risteska, Svetlana (2021) Mechanical and morphological analyses of laminated plates. Contemporary trends and innovations in the textile industry. ISSN ISBN: 978-86-900426-3-0

Srebrenkoska, Sara and Srebrenkoska, Vineta and Cekerovska, Marija and Cekerovski, Todor (2024) Design and Calculation of Products from Composite Materials Using Software. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM), 28. pp. 252-258. ISSN 2602-3199

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2013) Bio-based composites produced by conventional techniques using recycled polymer matrix. In: 8th International Conference of the Chemical Societies ICOSECS 8, 27-29 June 2013, Faculty of technology, Belgrade.

Stefanovska Ceravolo, Ljubica and Mirakovski, Dejan and Polenakovik, Radmil and Ristova, Emilija and Sovreski, Zlatko (2012) Indoor Air Quality (IAQ) as a Parameter Affecting Workplace Productivity. In: 9th International Congress "Machines, Technolоgies, Materials", 19-21.09.2012 , Varna, Bulgaria.

Stojanova, Teodora and Mirakovski, Dejan and Gecevska, Valentina and Simeonov, Simeon and Dzidrov, Misko (2014) Customer involvement into product creation process in Macedonian companies. In: 6th International Conference on Mass Customization and Personalization in Central Europe (MCP-CE 2014), 24–26 Sept 2014, Novi Sad, Serbia.

Stojkovski, Filip and Cekerovska, Marija and Filkoski, Risto and Stojkovski, Valentino (2016) Numerical Modelling of a Solar Chimney Power Plant. International Journal of Contemporary Energy, 2 (1). pp. 14-21. ISSN 2363-6440

Stojkovski, Filip and Cekerovska, Marija and Filkoski, Risto and Stojkovski, Valentino (2015) Numerical modelling of a solar chimney power plant. In: International Conference and Workshop REMOO 2015 "Technological, Modelling and Experimental Achievements in Energy Generation Systems", 23-24 Sept 2015, Budva, Montenegro.

Sumanska, Marija (2010) Споредба на ефикасноста на подвижен и неподвижен рамен сончев колектор. International symposium "ENERGEUCS 2010". pp. 625-636.

T

Tadic, Vjekosav and Banaj, Dzuro and Dimitrovski, Zoran and Banaj, Anamarija (2017) Pregled tehnicke ispravnosti strojeva u zastitu bilja. Glasnik Zastite bilja, 40 (4). ISSN 0350-9664

Temelkoska, Bratica (2011) Мерење и мерни инструменти. Мерење - Метролошки карактеристики - Мерни инструменти - Високошколски учебници COBISS.MK-ID 89639434 . Универзитет „Гоце Делчев“ - Штип, Штип. ISBN 978-608-4504-18-4

Temelkoska, Bratica (2011) Спојување на материјали. Goce Delcev University, Stip, Macedonia. ISBN 978-608-4504-22-1

Temelkoska, Bratica and Cvetanoski, Radomir (2016) Primenjena metodologija za zamenu cevnih lukova na integralnim cevovodima u TE Oslomej. Tehnika, 71 (2). pp. 249-254. ISSN 0040-2176

Temelkoska, Bratica and Taskov, Ljubomir and Krstevska, Lidija (2008) Experimental evaluation of dynamic behavior of pipeline systems of thermal power plants exposed to seismic loads. International Journal of Structural Stability and Dynamics (IJSSD), 8 (2). pp. 339-355.

Temelkovski, Ordan and Gelev, Saso and Golubovski, Roman and Cingoski, Vlatko and Stefanov, Goce (2015) Application of Fuzzy Logic in Control Systems of Heat Substations. In: XX Megunarodni naucno-strucni skup " Informacione Tehnologije" - Sadasnjost i Buducnost. Informacione Tehnologije, 20 (20). Univerzitet Crne Gore, Elektrotehnicki fakultet, Podgorica, Crna Gora, pp. 172-175. ISBN 978-86-85775-16-1

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Analysis of the possible influence in determining of the roughness profile in real non-periodic surfaces by application of Gaussian and 2RC filters. In: 33rd Naukowa Szkoła Obróbki Sciernej, Politechnika Łódzka, Wydział Mechaniczny, 8-10 Sept 2010, Lodz, Poland.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Investigation of the function and influence of Gaussian and 2RC filters to determine of roughness profile on real periodic surfaces. In: IV Konferencja Naukowa, Szkoła Obróbki Skrawaniem, Politechnika Łódzka, Wydział Mechaniczny, 6-8 Sept 2010, Lodz, Poland.

Tomov, Mite and Kuzinovski, Mikolaj and Trajchevski, Neven (2010) Function on Gaussian and 2RC filters to determine the roughness profile in real non-periodic and periodic surfaces. In: 14-th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2010, 11-18 Sept 2010, Mediterranean Cruise.

Tomov, Mite and Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr and Skowronek, Hubert (2014) Influence of the end effects on roughness parameters for short non-periodic profiles. Mechanik (9). pp. 323-327. ISSN 0025-6552

Tomov, Mite and Kuzinovski, Mikolaj and Trajchevski, Neven and Cichosz, Piotr and Skowronek, Hubert (2014) Influence of the end effects on roughness parameters for short non-periodic profiles. In: 37th Naukowa Szkoła Obróbki Ściernej, 23-25 Sept 2014, Kolobrzeg, Poland.

Tomovska, Elena and Kazani, Ilda and Jordeva, Sonja (2021) Attitudes towards Wearing Facemasks as a Fashion Accessor. In: 9th International Textile Conference & 3rd International Conference on Engineering and Entrepreneurship 2021, 18-19 Nov 2021, Tirana, Albania.

Topcheva, Teodora (2024) Анализа на нивото на персонална изложеност на бучава во погон за производство во автомобилската индустрија и ефектите врз перформансите на вработените. Doctoral thesis, Универзитет Гоце Делчев, Машински факултет.

Topcheva, Teodora and Hadzi-Nikolova, Marija and Mirakovski, Dejan (2023) Review on the personal noise exposure level in a manufacturing plant. International Journal of Engineering, 3 (XXI). pp. 143-146. ISSN 1584 – 2665; 2601 – 2332 (online); L 1584 – 2665

Topcheva, Teodora and Hadzi-Nikolova, Marija and Mirakovski, Dejan and Simeonov, Simeon and Petreski, Zlatko (2023) Personal noise exposure level and the impact on the employee`s performance in the automotive industry. International Scientific Journal "Industry 4.0", 8 (5). pp. 186-190. ISSN 2534-8582 / 2534-997X (web)

Trajchevski, Neven and Filiposki, Velimir and Kuzinovski, Mikolaj (2004) Personal computer interface for temperature measuring in the cutting process with turning. Proceedings, Faculty of Mechanical Engineering - Skopje, 23 (2). pp. 65-74. ISSN 0351-6067

Trajchevski, Neven and Kukutanov, Risto and Cvetkov, Slavco (2022) Елаборат со анализа за можностите за производство на наменски специјални алати и делови за автомобилската индустрија во РСМ. КОРТЕК МБ – Скопје.

Trajchevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 47-50. ISSN 1821-4932

Trajchevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Trajchevski, Neven and Kuzinovski, Mikolaj and Filiposki, Velimir and Cichosz, Piotr (2004) Computer aided measurement of the temperature in the cutting process by machining with turning. In: Proceedings of the scientific conference with international participation "Manufacturing and menagement in 21-st century", 16-17 Sept 2004, Ohrid, Republic of Macedonia.

Trajchevski, Neven and Sarac, Vasilija and Stefanov, Goce and Kuzinovski, Mikolaj and Tomov, Mite (2018) Integrated Machining Process Modelling and Research System. In: Applied Computer Technologies.

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Stevanoski, Goce (2022) Evaluation of the uncertainty contribution of the natural thermocouple characteristics in the empirical modelling of temperature during metal cutting process. Mechanical Engineering – Scientific Journal, 40 (1). pp. 5-10. ISSN 1857–5293

Trajchevski, Neven and Tomov, Mite and Sarac, Vasilija (2022) An Approach of Empirical Model Uncertainty Estimation During Physical Quantities Investigation in Turning. Journal of Advanced Manufacturing Systems, 21 (4). pp. 851-868. ISSN 1793-6896

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2014) Monte Carlo simulations in validation of measurement uncertainty of cutting force during machining by turning. Górnictwo Odkrywkowe, 55 (4-5). pp. 116-120. ISSN 0043-2075

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2018) Outlook on measurement, uncertainty and mathematical representation of the physical phenomena that occur in machining processes. In: The 10th International Symposium Machine and Industrial Design in Mechanical Engineering (KOD 2018), 6–8 June 2018, Novi Sad, Serbia.

Trajchevski, Neven and Kuzinovski, Mikolaj and Tomov, Mite and Cichosz, Piotr (2018) Reducing of process model uncertainty towards smart machining systems. Mechanik (10). pp. 877-879. ISSN 0025-6552

Trajchevski, Neven and Sarac, Vasilija and Kuzinovski, Mikolaj (2019) Determination of the influence of the natural thermo-couple thermo-voltage characteristics in the modelling of machining processes by turning. In: 14th International conference of applied electromagnetics PES-2019, Nis, R. Serbia.

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Cichosz, Piotr (2015) Introducing of measurement uncertainty in empirical power models of physical phenomena during machining processes. Mechanik (08/09). pp. 55-62. ISSN 0025-6552

Trajchevski, Neven and Tomov, Mite and Kuzinovski, Mikolaj and Cichosz, Piotr (2015) Introducing of measurement uncertainty in empirical power models of physical phenomena during machining processes. In: IX Konferencji Szkoły Obróbki Skrawaniem, 23-25 Sept 2015, Kielce-Sandomierz.

Tudzarovska Advokatov, Daniela and Jordeva, Sonja (2023) The influence of the type of cutting layout on the utilization of the textile material for women's pants. Knowledge - International Journal, 60 (3). pp. 523-528.

U

Uka, Ujmir and Zekiri, Kemalj and Dambov, Risto and Ferati, Burim (2023) Simulation of the impact of seismic waves on the stability of active benches in the Sibovc mine. XIV Стручно советување со меѓународно учество: Технологија на подземна и површинска експлоатација на минерални суровини Подекс – Повекс ’23.

Uler-Zefikj, Monika and Filkoski, Risto and Seso, Igor and Dimitrovski, Dame and Manev, Nikola and Spirkovska, Vera (2022) Ethical dilemmas of renewable energy. Mechanical Engineering Scientific Journal, 40 (2). pp. 93-98. ISSN 1857–5293

V

Velichkovska, Frosina and Stojchevska, Maja and Srebrenkoska, Sara and Risteska, Svetlana and Srebrenkoska, Vineta (2023) Properties of Composite Parts Manufactured using UD Carbon Fiber/Epoxy Prepreg. International Journal of Engineering Research & Technology (IJERT), 12 (06). pp. 29-33. ISSN 2278-0181

Vujasin, Sonja and Bundevska, Jadranka and Kokalanov, Vasko and Dejanoska, Tanja and Vankovski, Vlado and Vasileva-Gesovska, Katerina (2019) Дистрибуција на оклузални вертикални сили кај мостовна конструкција со два носачи и дистално продолжен член. International Journal of Science and Arts - “IDEA”, 3 (5). pp. 227-236. ISSN 2545-4552

W

Weiler, Dennis and Dimitrov, Sasko (2023) Elimination of preheating by determining suitable welding parameters. TIBB - junge technologien in der beruflichen bildung.

Y

Yamane, Hideaki and Cingoski, Vlatko and Kaneda, Kazufumi and Yamashita, Hideo and Nakayama, Michio (1997) Development and Verification of a System for 2D Analysis of a Coupled Magneto-Thermal Problems. 4th Japanese-Czech-Slovak Joint Seminar on Applied Electromagnetics. pp. 58-61.

Yamashita, Hideo and Cingoski, Vlatko (1994) The Hopfield Neural Network and its Application for direct Solution and inverse Optimization in Finite Element Analysis. Proceedinds of 3rd Japan-Hungary Joint Seminar on Applied Electromagnetics in Materials and Computational Technology, 38 (3). pp. 231-228.

Z

Zhezhova, Silvana and Srebrenkoska, Vineta and Jordeva, Sonja and Dimitrijeva-Kuzmanoska, Vanga and Risteski, Sanja (2017) Defining the time-loss in the process of producing a men’s shirt. Tekstilna industrija, 64 (3). pp. 33-37. ISSN 0040-2389