Items where Subject is "Engineering and Technology > Materials engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 300.

Article

Adjiski, Vancho (2014) Можности за симулирање на ефектот на реверсирање на чадот и пожарните продукти со помош на CFD софтвер во рудниците за подземна експлоатација. Natural resources and technologies, 8 (1). pp. 31-42. ISSN 185-6966

Adjiski, Vancho (2014) Possibilities for simulating the smoke rollback effect in underground mines using CFD software. GeoScience Engineering, 60 (2). pp. 8-18. ISSN 1802-5420

Adjiski, Vancho and Despodov, Zoran and Mirakovski, Dejan and Mijalkovski, Stojance (2016) Analysis for еfficiency of work in underground mine using a computer application. Natural Resources and Technologies, X (10). pp. 23-32. ISSN 185-6966

Adjiski, Vancho and Despodov, Zoran and Mirakovski, Dejan and Mijalkovski, Stojance (2015) Fire risk assessment and computer simulation of fire scenario in underground mines. Studies in Engineering and Technology, 2 (1). pp. 54-60. ISSN 2330-2038

Adjiski, Vancho and Mirakovski, Dejan and Despodov, Zoran and Mijalkovski, Stojance (2016) CFD simulation of the brattice barrier method for approaching underground mine fires. Mining Science, 23. pp. 161-172. ISSN 2300-9586

Adjiski, Vancho and Mirakovski, Dejan and Despodov, Zoran and Mijalkovski, Stojance (2015) Modeling of fire scenarios in underground mines. Natural Resources and Technologies, 9 (9). pp. 29-47. ISSN 185-6966

Adjiski, Vancho and Mirakovski, Dejan and Despodov, Zoran and Mijalkovski, Stojance (2015) Simulation and optimization of evacuation routes in case of fire in underground mines. Journal of Sustainable Mining, 14 (3). pp. 133-143. ISSN 2300-3960

Alili, Agron and Krstev, Boris and Trajkova, Sofce and Stoilov, Zoran and Krstev, Aleksandar and Stamenov, Goran (2015) Disposed biomass as a new origin for heat power – possibilities and perspectives. Natural Resources and Technologies, 9 (9). pp. 233-244. ISSN 185-6966

Angusheva, Biljana and Jovanov, Vojo and Srebrenkoska, Vineta and Fidancevska, Emilija (2014) Glass Ceramics Composites Fabricated from Coal Fly Ash and Waste Glass. Proceedings of the 27th International Conference of the Israel Nuclear Societies. pp. 294-299.

Avella, Maurizio and Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Gentile, Gennaro and Grozdanov, Anita and Errico, Maria and Buzarovska, Aleksandra (2006) Recycling and reuse facilities of lignocellulosic material filled eco-composites. Proceedings on 12th European Conference on Composite Materials.

Barvinok, Vitaly and Bogdanovich, Valery and Dokukina, Irina and Barvinok, Alexey and Bunova, Galina and Cingoski, Vlatko (2014) Mathematical Modeling of Spray Material Acceleration and Heating during the Formation of Plasma Cluster Coatings. Wulfenia Journal, 21 (2). pp. 94-103. ISSN 1561-882X

Barvinok, Vitaly and Bogdanovich, Valery and Dokukina, Irina and Barvinok, Alexey and Cingoski, Vlatko (2014) Mathematical Modeling of High Energy Plasma Technologies with Account for some of the Fundamental Problems. Wulfenia Journal, 21 (2). pp. 104-113. ISSN 1561-882X

Basovski, Gorgi and Srebrenkoska, Vineta and Dimeski, Dimko and Dimitrievski, Zivko (2002) Смалување на убојното дејство на фрагментите на рачните бомби со помош на контролирана фрегментација. Proceedingf of First Simposyum of Explosive Materials, Weapons and Military Technology.

Blazevska Gilev, Jadranka and Lisickov, Kiril and Fidancevska, Emilija and Srebrenkoska, Vineta (2013) Creation of lifelong learning network for development of sustainable technologies. Proceedings 3rd International Congress “Engineering, Environment and Materials in Processing Industry”. pp. 480-486.

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Herakovic, Niko (2011) Effect of sonication applied during production of carbon fiber/epoxy resin composites evaluated by differential scanning calorimetry and thermo-gravimetric analysis. Macedonian Journal of Chemistry and Chemical Engineering, Vol. 30, No. 2, pp. 189–195 (2011).

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta (2013) Biocomposites based on PLA and kenaf fibers: Effect of fibrillated celulose. Macedonian Journal of Chemistry and Chemical Engineering, 32 (2). pp. 331-335. ISSN 1857-5552

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta (2013) Biocomposites based on poly(lactic acid) and kenaf fibers: effect of microfibrillated cellulose. Macedonian Journal of Chemistry and Chemical Engineering, 32 (2). pp. 331-335. ISSN 1857-5552 (online) 1857-5625

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta (2012) Poly(lactic acid) /kenaf fiber composites: effect of microfibrillated cellulose on interface-sensitive properties. Proceedings of the XXII International Congress of Chemists and Technologists of Macedonia.

Bogoeva-Gaceva, Gordana and Herakovic, Niko and Dimeski, Dimko and Stefov, Viktor (2010) Ultrasound assisted process for enhanced interlaminar shear strength of carbon fiber/epoxy resin composites. Macedonian Journal of Chemistry and Chemical Engineering. Vol. 29, No. 2, pp. 149–155 (2010).

Bogoeva-Gaceva, Gordana and Herakovic, Niko and Nasov, Ilija and Dimeski, Dimko and Srebrenkoska, Vineta and Stefov, Viktor (2012) New Materials for Production of Advanced Pneumatic and Hydraulic Valves. Proceedings of the International Conference on Composite Interfaces.

Bogoeva-Gaceva, Gordana and Janevski, Aco and Dekanski, Aleksandar and Burevski, D (1995) The effect of surface treatment on the interfacial properties in carbon fibre/epoxy matrix composites. Journal of materials science, 30 (13). pp. 3453-3546.

Cvetkovski, Aleksandar and Angelovska, Bistra (2016) The role of cocrystallization screening for the assessment of structure-activity relationship in drug development. Macedonian pharmaceutical bulletin, 62. pp. 345-346. ISSN 1409 - 8695

Dambov, Risto and Dambov, Ilija and Delipetrov, Todor (2013) Analysis of the obtained statistical measurement values of seismical blasting tremors. Proceding of V Balkan Mining Congress, Balkanmine, 850.

Dambov, Risto and Stojkoski, Goran and Hristov, Dimitar and Rzanikoski, Nikola (2013) Techno – economical analyses of the methods for producing of dimension stone blocks. V Balkan Mining Congres, Balkanmine. Ohrid, Macedonia.

Demboski, Goran and Srebrenkoska, Vineta and Zezova, Silvana and Kortoseva, Sonja (2016) Utilization of garment industry textile waste. Mech. Eng. Sci. Journal, 34 (1). pp. 241-246. ISSN 1857 – 5293 (in print) 1857 – 9191(on line)

Despodov, Zoran and Cekerovski, Todor and Adjiski, Vancho (2013) Application of GPS technology for management with mobile mining machinery in copper mine "Bučim". Underground Mining Engineering, 23. pp. 69-76. ISSN 0354-2904

Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta (2011) Ballistic properties of polyethylene composites based on bidirectional and unidirectional fibers. Conference Proceedings. ISSN 0352-6542

Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta (2011) Resin content and molding pressure influence on ballistic properties and trauma effect of aromatic amide fibers composites. Conference Proceedings. ISSN 0352-6542

Dimeski, Dimko and Spaseska, Dijana (2004) Ballistic properties of bidirectional fiber/resin composites. Bulletin of the Chemists and Technologists of Macedonia. ISSN 0350 – 0136

Dimeski, Dimko and Spaseska, Dijana and Srebrenkoska, Vineta (2009) Ballistic strength of woven fabrics for personal protection. Journal of Engineering & Processing Management, 1 (2). pp. 31-44.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Design of glass/phenolic ballistic composites by implementation of factorial experimental design. Zaštita materijala, 55 (4). pp. 122-126.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Predicting ballistic strength of life-saving aramid fiber composites for personal protection. Quality of Life, 5 (1-2). pp. 33-38. ISSN 1986-602X

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Predicting the ballistic strength of aramid fiber composites by implementing full factorial experimental design. Technologica Acta, 7 (2). pp. 33-37. ISSN 1840-0426/ 2232-7568 (Online)

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Predicting the ballistic strength of ultra high molecular weight polyethylene/fiber composites by implementing full factorialexperimental design. Journal of Engineering & Processing Management, 6 (1). pp. 91-98.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) The design of nylon fiber/phenolic ballistic composites by the implementation of the full factorial experimental design. Advanced technologies, 3 (1). pp. 54-58. ISSN 2217-9720

Dimeski, Dimko and Srebrenkoska, Vineta and Basovski, Gorgi (2002) Analyze with fast thermal neutrons for explosives detections. Proceedings of the First Simposyum of Explosive Materials, Weapons and Military Technology.

Dimeski, Dimko and Srebrenkoska, Vineta and Mirceska, Natasa (2015) Ballistic Impact Resistance Mechanism of Woven Fabrics and their Composites. International Journal of Engineering Research & Technology (IJERT), 4 (12). pp. 107-112. ISSN 2278-0181

Dimeski, Dimko and Srebrenkoska, Vineta and Spaseska, Dijana and Samakoski, Blagoja (1999) Polietilenski filc i tkaenina za balisticka zastita. Proceedings of the XVI Congress SHTM.

Dimzoski, Bojan and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta and Avella, Maurizio and Gentile, Gennaro and Errico, Maria (2008) Preparation and characterization of poly(lactic acid)/rice hulls based biodegradable composites. Journal of Polymer Engineering, 28 (6-7). pp. 369-383.

Fidancevska, Emilija and Bossert, Jorg and Angjusheva, Biljana and Jovanov, Vojo and Srebrenkoska, Vineta (2016) Sintering of ceramics based on mechanicaly activated fly ash. Proceedings of the International RILEM Conference on Materials, Systems and Structures in Civil Engineering 2016. pp. 403-414. ISSN 978-2-35158-178-0

Fidancevska, Emilija and Hoeflinger, Willy and Grujic, Radoslav and Srebrenkoska, Vineta and Blazevska Gilev, Jadranka (2011) Sustainable development in materials engineering. Proceedings of the International Scientific Conference Renewable Energy Sources and Sustainable Development. ISSN 978-99955-49-72-5

Fidancevska, Emilija and Jovanov, Vojo and Angusheva, Biljana and Srebrenkoska, Vineta (2014) Composites based on fly ash and clay. Proceedings of the 27th International Conference of the Israel Nuclear Societies. pp. 292-294.

Fidancevska, Emilija and Srebrenkoska, Vineta (2012) Creation of university-enterprise cooperation networks for education on sustainable technologies. Maced. J. Chem. Chem. Eng., 31 (2). pp. 307-316. ISSN 1857-5552

Golomeova, Mirjana and Zendelska, Afrodita and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj (2014) Removal of Heavy Metals from Aqueous Solution using Clinoptilolite and Stilbite. International Journal of Engineering Research & Technology, 3 (11). pp. 1029-1035. ISSN 2278-0181

Golomeova, Saska and Demboski, Goran and Kortosheva, Sonja (2011) Maximizing fusible interlinings bonding strength by optimizing the fusing conditions. Textile Science and Economy. ISSN 978-86-7672-150-4

Golomeova, Saska and Krsteva, Silvana (2011) Управување со цврст текстилен отпад. pp. 167-174.

Golomeova, Saska and Srebrenkoska, Vineta and Zezova, Silvana (2013) Третирање на цврст текстилен и комунален органски отпад. Natural Resources and Technology. ISSN 185-6966

Jakupi, Shaban and Lisickov, Kiril and Golomeova, Mirjana and Atkovska, Katerina and Marinkovski, Mirko (2016) Separation of Co(II) ions from water resources by natural zeolite (clinoptilolite). Zaštita materijala i životne sredine, 5 (1). pp. 57-66. ISSN 1800-9573

Janevski, Aco and Bogoeva-Gaceva, Gordana (2014) Determination of the parameters of crystallization of maleic anhydride modified polypropylene in model composites with glass fibres. International Journal of Innovative Research in Science & Engineering (IJIRSE), 2 (10). pp. 705-713. ISSN 2347-3207

Janevski, Aco and Bogoeva-Gaceva, Gordana (1998) Isothermal crystallization of iPP in model glass‐fiber composites. Journal of Applied Polymer Science, 69 (2). pp. 381-389.

Janevski, Aco and Bogoeva-Gaceva, Gordana (2015) The influence of glass fibers on the morphology of β-nucleated isotactic polypropylene evaluated by differential scanning calorimetry. Journal of the Serbian Chemical Society, 80 (2). pp. 223-235. ISSN 0352-5139 (Print) 1820-7421 (Online)

Janevski, Aco and Bogoeva-Gaceva, Gordana and Grozdanov, Anita (1998) Crystallization and melting behavior of iPP studied by DSC. Journal of Applied Polymer Science, 67. pp. 395-404.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Mader, Edit (2000) Characterization of a maleic anhydride-modified polypropylene as an adhesion promoter for glass fiber composites. Journal of Adhesion Science and Technology, 14 (3). pp. 363-380.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Mader, Edit (1999) DSC analysis of crystallization and melting behavior of polypropylene in model composites with glass and poly(ethylene terephthalate) fibers. Journal of Applied Polymer Science, 74. pp. 239-246.

Janevski, Aco and Bogoeva-Gaceva, Gordana and Stefov, Viktor and Najdoski, Metodija (2015) The correlation between structure and β-nucleation efficiency of Ba, Sr, Ca and Mg pimelates in isotactic polypropylene. Macedonian Journal of Chemistry and Chemical Engineering, 34 (1). pp. 189-199. ISSN 1857-5552

Janevski, Aco and Leben, Stanko and Osredkar, Uci and Sebenik, Anton (1992) Polymerization of diiodoacetylenes, their structure and electrical properties. Synthetic metals, 53 (1). pp. 21-28.

Janevski, Aco and Leben, Stanko and Sebenik, Anton and Osredkar, Uci (1991) The correlation between electrical properties and structure of substituted polyacetylenes. Polymer bulletin, 26 (4). pp. 473-480.

Jordeva, Sonja and Kjortoseva, Sonja and Kaloyanov, Nikola (2012) Research of thermo-physiological comfort of single jersey knitted structures with method of thermo-vision analysis. 4th International Scientific – Professional Conference Textile Science and Economy Proceedings, Zrenjanin.

Jordeva, Sonja and Kjortoseva, Sonja and Ljapceva, Kostadinka and Kaloyanov, Nikola (2010) The influence of structural properties and characteristics of the fiber on the physical-mechanical properties and thermo-physiological comfort of single jersey knitted fabrics. XX! Congress of Chemists and Technologists of Macedonia.

Jordeva, Sonja and Kortoseva, Sonja and Ljapceva, Kostadinka (2009) The influence of cotton knitted structure on the thermal comfort properties. VIII Congress of Pure and Applied Chemistry for Students of Macedonia.

Jordeva, Sonja and Kortoseva, Sonja and Mojsov, Kiro and Zhezhova, Silvana and Spasova, Sanja and Dimitrijeva, Vanga (2017) The influence of the structural characteristics of cotton and pоlyester knitted fabrics on the thermo-physiological comfort. Advanced technologies, 6 (1). pp. 1-93. ISSN 2406-3037

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2014) Application of Apparel Cutting Waste as Insulation Material. Book of Proceedings 6th International Textile Conference.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2014) Tekstilni otpad kao materijal za toplinsku izolaciju. Tekstil, 63 (5-6). pp. 168-178. ISSN 0492-5882

Jordeva, Sonja and Trajković, Dušan and Tomovska, Elena and Zafirova, Koleta (2014) Tekstilna industrija i tekstilni otpad u R. Makedoniji. Tekstilna industrija, 61 (6). pp. 29-32. ISSN 0040-2389

Karolczak, Pawel and Kowalski, Maciej and Szmara, Adam and Trajcevski, Neven (2010) Application aiding rapid selection of cutting parameters on the example of aluminium alloys turning. Technological Engineering - International Scientific Journal, 7 (2). pp. 15-17. ISSN 1336-5967

Krsteva, Silvana and Demboski, Goran (2011) Determination of generated textile waste in clothing companies of different technological level. Textile Science and Economy. ISSN 978-86-7672-150-4

Krsteva, Silvana and Srebrenkoska, Vineta and Demboski, Goran (2011) Using of textile waste for production of composite materials. Conference Proceedings, XIII YUCORR International Conference. ISSN 978-86-82343-14-1

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 29-32. ISSN 1821-4932

Kuzinovski, Mikolaj and Trajcevski, Neven and Filiposki, Velimir and Cichosz, Piotr (2006) Computer aided system for investigation of cutting forces and temperature in turning. Górnictwo Odkrywkowe (7-8). pp. 10-14. ISSN 0043-2075

Kuzinovski, Mikolaj and Trajcevski, Neven and Filiposki, Velimir and Tomov, Mite and Cichosz, Piotr (2009) Monitoring system for automation of experimental researches in cutting. Mechanical Engineering – Scientific Journal, Proceedings, 28 (2). pp. 41-60. ISSN 1857 – 5293

Kuzinovski, Mikolaj and Trajcevski, Neven and Tomov, Mite and Cichosz, Piotr (2010) Analysis of hardware and software solutions in function of the reliability of experimental research results during investigation of cutting forces and temperature in the cutting process. Górnictwo Odkrywkowe, 3. pp. 148-153. ISSN 0043-2075

Leben, Stanko and Janevski, Aco and Sebenik, Anton and Osredkar, Uci (1992) The synthesis and characterization of polydibromoacetylene. Polymer Bulletin, 28 (3). pp. 287-292.

Lisickov, Kiril and Fidancevska, Emilija and Grujic, Radoslav and Srebrenkoska, Vineta and Kuvendziev, Stefan (2011) Sustainable development of gree solvent separation process. Proceedings of the International Scientifi c Conference Renewable Energy Sources and Sustainable Development. ISSN 978-999-55-49-72-5

Mateska, Maja and Samardzioska, Todorka and Trombeva Gavriloska, Ana and Lepitkova, Sonja and Jovanovski, Milorad (2015) Mechanical properties of zeolit samples from Strmosh mine, Republic of Macedonia. Proceedings of the 16th International Symposium of MASE, Ohrid, Macedonia, 1–3 Oct 2015. pp. 359-364. ISSN ISBN: 608-4510-26-4

Mijalkovski, Stojance and Despodov, Zoran and Doneva, Nikolinka and Adjiski, Vancho (2016) Modern trends of geodesy works in underground mine for lead and zinc “Sasa”. Mining and metallurgy engineering Bor (1). pp. 89-94. ISSN 2406-1395

Mijalkovski, Stojance and Despodov, Zoran and Doneva, Nikolinka and Adjiski, Vancho (2016) Ore losses in underground mines for metal minerals. Natural Resources and Technologies, X (10). pp. 5-21. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Gorgievski, Cvetan and Bogdanovski, Goran and Mirakovski, Dejan and Hadzi-Nikolova, Marija and Doneva, Nikolinka (2013) Modern geodesy approach in underground mining. Natural Resources and Technologies, 7 (7). pp. 15-20. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Adjiski, Vancho and Doneva, Nikolinka (2017) Methodology for optimization of coefficient for ore recovery in sublevel caving mining method. Underground Mining Engineering (30). pp. 19-27. ISSN 0354-2904

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Doneva, Nikolinka and Adjiski, Vancho (2015) Recovery and ore dilution at the mining methods. Natural Resources and Technologies, 9 (9). pp. 19-28. ISSN 185-6966

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Hadzi-Nikolova, Marija and Mitic, Sasa (2015) Determination and monitoring of ore recovery and dilution coefficients in Sasa lead and zinc mine - M. Kamenica, R.Macedonia. Underground Mining Engineering, 23 (26). pp. 1-9. ISSN 0354-2904

Mitkovski, Mladen and Cingoski, Vlatko and Gelev, Saso (2017) Performance Modelling of PV Arrays Under Specific Working Conditions. Zbornik radova sa XXII međunarodnog naučno - stručnog skupa „Informacione tehnologije - sadašnjost i budućnost“, XXII. pp. 42-45. ISSN 978-86-85775-20-8

Naoe, Takuto and Noguchi, So and Cingoski, Vlatko and Igarashi, Hajime (2016) Fast Magnetic Flux Line Allocation Algorithm for Interactive Visualization Using Magnetic Flux Line Existence Probability. IEEE Transactrion on Magnetics, 52 (3). ISSN 0018-9464

Naseva, Simona and Srebrenkoska, Vineta and Risteska, Svetlana and Stefanoska, Maja and Srebrenkoska, Sara (2015) Mechanical properties of filament wound pipes: effects of winding angles. Quality of Life, 6 (1-2). pp. 10-15. ISSN 1986-602X

Naumoski, Jovan and Smileski, Rose and Stoevska, D. (1998) Одреѓивање утицаја површине узорака на брзину атмосферске корозије челика. Књига радова XIV. Југословенски симпозиум о електрохемији, Бечиќи, 15-18 June 1998, Хемијско друштво Црне Горе. pp. 101-102.

Noguchi, So and Cingoski, Vlatko (2017) Simulation of Screening Current Reduction Effect in REBCO Coils by External AC Magnetic Field. IEEE Transaction on Applied Superconductivity, 27 (4). ISSN 1051-8223

Paunovic, Perica and Dimitrov, Aleksandar and Popovski, Orce (2009) Effect of activation/purification of multiwalled carbon nanotubes (MWCNTs)on the activity of non-platinum based hypo-hyper d-electrocatalysts for hydrogen evolution. Materials Research Bulletin, 44 (9). pp. 1816-1821.

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Нов метод за динамичко испитување на запалки за противтенковски мини. Зборник на трудови од 8-ми симпозиум за теоретска и применета механика, Скопје, 3-5 Oct 2002. pp. 105-111.

Petreski, Drage and Babamov, Nake and Smileski, Rose (2002) Воспоставување критериуми за испитување запалки за противтенковски мини. Зборник на трудови од „Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија“, Охрид 2002. pp. 395-403.

Petreski, Drage and Smileski, Rose and Dojcinovski, Metodija (2010) Трговија со конвенционалното оружје како глобален предизвик. Современа македонска одбрана. pp. 75-84. ISSN 1409-8199

Petreski, Drage and Smileski, Rose and Dojcinovski, Metodija and Gjozo, Kemo (2013) Трговија со конвенционалното оружје како глобален предизвик. Современа македонска одбрана. pp. 75-84.

Pop Metodieva, Biljana and Srebrenkoska, Sara and Srebrenkoska, Vineta (2015) The design of glass fiber//epoxy composite pipes by the implementation of the full factorial experimental design. Quality of Life, 6 (3-4). pp. 83-87. ISSN 1986-602X (print); 1986-6038 (online)

Pop Metodieva, Biljana and Zhezhova, Silvana and Srebrenkoska, Vineta and Naseva, Simona and Srebrenkoska, Sara (2016) Design of polymer composite pipes produced by filament winding technology. Machines, Technologies, Materials, 10 (1). pp. 23-26. ISSN 1313-0226

Popovski, Orce and Smileski, Rose and Trajkovska - Petkoska, Anka (1999) Детекција на Циклотриметилентринитроамин и 1-метил-2,4,6-тринитробензен (ТНТ) со помош на течна хроматографија. Зборник на објавени трудови од XVI. Конгрес на хемичарите и технолозите, со меѓународно учество, 28-30 Oct 1999, Скопје. pp. 443-446.

Risteska, Svetlana and Samakoski, Blagoja and Srebrenkoska, Vineta and Stefanoska, Maja (2015) Flexural properties of hybrid composite parts. Quality of Life, 6 (1-2). pp. 5-9. ISSN 1986-602X

Samardzioska, Todorka and Jovanovski, Milorad and Lepitkova, Sonja (2017) Zeolites - sustainable building material. Proceedings of the 1st International Conference on Construction materials for sustainable future (CoMS_2017), Zadar, Croatia, 19-21 April 2017. pp. 146-151. ISSN ISBN: 978-953-8168-04-8

Smileski, Rose (1999) Фотоелектрохемиски испитувања на оксидните слоеви на бакар во деаерирана синтетичка морска вода. Зборник на објавени трудови од XVI. Конгрес на хемичарите и технолозите на Македонија со меѓународно учество, Скопје, 28-30 Oct 1999. pp. 607-610.

Smileski, Rose and Hadzi Jordanov, Svetomir (1997) Карактеризација на оксидниот слој создаден врз бакарот при корозија во синтетичка морска вода. Зборник на објавени трудови XV. Конгрес на хемичарите и технолозите на Македонија, со меѓународно учество. 02-04 Oct 1997, Скопје. pp. 110-112.

Smileski, Rose and Hadzi Jordanov, Svetomir (1995) Parametri elektrodne reakcija kod korozije bakra i mesinga u sintetickoj morskoj vodi. Knjiga radova 13. Jugoslovenski simpozijum o elektrohemiji, sa medjunarodnim ucescem, Vrnjacka Banja, 11-15 June 1995. pp. 73-75.

Smileski, Rose and Naumoski, Jovan (2002) Испитување на оксидниот слој на бакарот создаден при корозија во синтетска морска вода. Прв конгрес на инжинерите на Македонија, Струга, 24-26 Oct 2002. pp. 267-272.

Smileski, Rose and Naumoski, Jovan (1998) Ispitivanje oksidnog sloja bakra. Knjiga radova XIV Jugoslovenski simpozium o elektrohemiji, Becici, 15-18 June 1998, Hemijsko drustvo Crne Gore. pp. 103-104.

Smileski, Rose and Popovski, Orce (2002) Избор на растворувач за идентификација на бризантните експлозивни материи. Зборник на трудови од Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија, Охрид, 25-28 Oct 2002, Воена академија „Генерал Михаило Апостолски” - Скопје. pp. 65-72.

Smileski, Rose and Popovski, Orce and Trajkovska - Petkoska, Anka (2000) Хроматографско определување на содржината на стабилизаторот во потисните експлозивни материи. Современа македонска одбрана (1). pp. 157-161.

Smileski, Rose and Trajkovska - Petkoska, Anka and Popovski, Orce (2002) Хроматографско испитување на амонимумнитратните експлозиви кои се употребуваат во стопанството. Современа македонска одбрана (5). pp. 57-66.

Smileski, Rose and Trajkovska - Petkoska, Anka and Popovski, Orce (2000) Испитување на хемиската стабилност на потисните експлозивни материи со помош на течна хроматографија. Годишник на факултетот за безбедност, Скопје, 18 (1). pp. 71-80. ISSN 1409-5068

Spasova, Sanja and Srebrenkoska, Vineta (2017) Design and construction of advanced model of protective clothes. Tekstilna industrija, 64 (1). pp. 29-35. ISSN 0040-2389

Spasova, Sanja and Srebrenkoska, Vineta and Zhezhova, Silvana (2017) APPLYING OF DIFFERENT FABRICS FOR DESIGN OF THE PROTECTIVE MILITARY CLOTHES. Quality of Life, 8 ((1-2)). pp. 56-63. ISSN 1986-602X

Spasova, Sanja and Zhezhova, Silvana and Srebrenkoska, Vineta (2017) Commonly used textile fibers in composite industry for special purposes. International Journal Knowledge, 16.4. pp. 1673-1678. ISSN 1857-923X

Spasova, Sanja and Zhezhova, Silvana and Srebrenkoska, Vineta (2017) Textile materials used in military protective clothes design. V International Congress “Engineering, Environment and Materials in Processing Industry“. ISSN 978-99955-81-21-3

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2010) Biocomposites Based on Poly (Lactic Acid) and Their Recyclability. Quality of Life, 2 (1-2). pp. 21-32. ISSN 1986-602X

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2011) Production of new eco-materials based on poly (lactic acid) and natural fibers. Conference Proceedings, International Congress, Engineering, ecology and materials in the processing industry. ISSN 978-99955-81-00-8

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2011) Thermal characterization of the composites based on poly(lactic acid). Conference Proceedings, XIII YUCORR International Conference. ISSN 978-86-82343-14-1

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Avella, Maurizio and Errico, Maria and Gentile, Gennaro (2008) Recycling of polypropylene 1 based eco-composites. Polymer International, 57 (11). pp. 1252-1257. ISSN 1097-0126

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Avella, Maurizio and Errico, Maria and Gentile, Gennaro (2009) Utilization of Recycled Polypropylene for Production of Eco-Composites. Polymer-Plastics Technology and Engineering, 48 (11). pp. 1113-1120. ISSN 0360-2559 (print) 1525-6111 (online)

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2004) Својства на пултрудирани материјали со разни типови полимерна матрица. Proceedings of the XVIII Congress SHTM.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2014) Biocomposites based on polylactic acid and their thermal behavior after recycling. Macedonian Journal of Chemistry and Chemical Engineering. pp. 277-285. ISSN 1857-5552, e-ISSN 1857-5625

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Composite material based on an ablative phenolic resin and carbon fibers. Journal of the Serbian Chemical Society, 74 (4). pp. 441-453. ISSN 0352-5139 (Print) 1820-7421 (Online)

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Korisčenje recikliranih polimernih matrica za prozvodnju eko-kompozita. Knjiga radova. ISSN 978-99955-625-2-6

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (1999) Opredeluvanje na optimalni uslovi za dobivanje na pres masa vrz baza na karbonizirani vlakna i fenol-formaldehidna smola za visokotemperaturna namena. Proceedings of the XVI Congress SHTM.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Preparation and recycling of polymer eco-composites i. Comparison of the conventional molding techniques for preparation of polymer eco-composites. Macedonian Journal of Chemistry and Chemical Engineering, 28 (1). pp. 99-109. ISSN 1857–5552

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2004) Properties of pultruded composites with different polymer matrices. Proceedings of the XVIII Congress SHTM.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2011) Utilization of recycled polymer matrices for production of eco-composites. Quality of Life, 1 (2-4). pp. 139-146.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2010) Utilization of recycled polymer matrices for production of eco-composites. Quality of Life, 1 (2-4). pp. 139-146. ISSN 1986-602X

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Utilization of recycled polymer matrices for production of eco-composites. XI YUCOR Proceedings. ISSN 978-86-82343

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2001) Utjecaj procesnih parametara i duljine ugljikovih vlakana na mehanička i toplinska svojstva fenolnih kompozita. Polimerni kompoziti.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Krsteva, Silvana and Dimeski, Dimko (2010) Ecological aspects of sustainable polymer composite materials: the potential of reuse and recycling. Conference Proceedings. ISSN 978-86-82343-13-4

Srebrenkoska, Vineta and Capeska Bogtinoska, Dijana (2011) Industrial symbiosis and eco-industrial networks. Proceedings of the International Scientific Conference Renewable Energy Sources and Sustainable Development. ISSN 978-99955-49-72-5

Srebrenkoska, Vineta and Capeska Bogtinoska, Dijana (2012) Waste treatment from polymer composite materials. Proceedings of the XXII International Congress of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta and Dimeski, Dimko and Basoski, Gorgi (2002) Термичка карактеризација на композитен материјал за вградување во противградна ракета. Proceedings of first simposyum of explosive materials, weapons and military technology .

Srebrenkoska, Vineta and Dimeski, Dimko and Basoski, Gorgi and Smileski, Rose (2003) Механички и термички карактеристики на композитен материјал за вградување во противградна ракета. III Советување за дупчење и минирање со меѓународно учество, Охрид, 28-31 мај 2003, Зборник на трудови, Рударско-геолошки факултет Штип. pp. 264-274.

Srebrenkoska, Vineta and Dimeski, Dimko and Basoski, Gorgi and Smileski, Rose (2003) Mechanical and thermal properties of composite material for anti-hail rockets. Confrence Proceedings, III Conference on Drilling and Blasting.

Srebrenkoska, Vineta and Dimeski, Dimko and Basovski, Gorgi (2001) Comparative ballistic characteristics of composite material based on polyethylene and ARAMID reinforcing fibers. Proceedings of the XXI simpozijum o eksplozivnim materijama JKEM.

Srebrenkoska, Vineta and Dimeski, Dimko and Basovski, Gorgi (2001) Mehanicke i toplotne karakteristike kompozitnog materijala za ugradnji u raketnoj tehnici. Proceedings of the XXI simpozijum o eksplozivnim materijama JKEM.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2016) Application of Factorial Experimental Design in Predicting Mechanical Properties of Polypropylene based Composites. International Journal of Engineering Research & Technology (IJERT), 5 (2). pp. 95-99. ISSN 2278-0181

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2002) Thermal properties of ablative phenolic resins. Proceedings of the XVII Congress of SHTM (P-P16).

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2001) The influence of processing parameters and length of carbon fibres on mechanical and thermal properties of phenolic based composites. Polimerni kompoziti.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Grozdanov, Anita and Buzarovska, Aleksandra (2006) Caracterization of kenaf / pla composites. Proceedings, ICOSECS 5 - International Conference of the Chemical Societies of the South-East European Countries.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Herakovic, Niko and Stefov, Viktor (2010) Development of new actuators, materials and technology for the production of advanced pneumatic and hydraulic valves-materials selection. Book of Abstracts, XXI Congress of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Stefov, Viktor and Herakovic, Niko and Nasov, Ilija (2010) E!4548 De-Amatech: Development of new actuators, materials and technology for the production of advanced pneumatic and hydraulic valves. Book of Abstracts, XXI Congress of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta and Dimeski, Dimko and Spaseska, Dijana and Smileski, Rose (2003) Influence of molding pressure on blunt trauma effect and ballistic properties of unidirectional and bidirectional composites based on ultra high molecular weight polyethylene fibers. Conference Proceedings, III Conference on Drilling and Blasting.

Srebrenkoska, Vineta and Dimzoski, Bojan and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2009) Recycling ability of the polypropylene for production of the natural fiber composites. Proceedings of the Seminar of Ecology. ISSN 978-954-397-015-5

Srebrenkoska, Vineta and Fidancevska, Emilija (2012) Environmental issues in materials science and engineering. Conference Proceedings, XIV YUCORR International Conference. ISSN 978-86-82343-14-1

Srebrenkoska, Vineta and Fidancevska, Emilija (2013) Environmental issues in materials science and engineering. Materials Protection, 2 (54). pp. 167-174. ISSN 0351-9465

Srebrenkoska, Vineta and Fidancevska, Emilija and Blazevska Gilev, Jadranka and Lisickov, Kiril (2012) Role of technology. Technologica Acta, 5 (2). pp. 14-21. ISSN 1840-0426/ 2232-7568 (Online)

Srebrenkoska, Vineta and Fidancevska, Emilija and Blazevska Gilev, Jadranka and Lisickov, Kiril (2012) Role of technology as a basis of cleaner production. Proceedings of 2nd International Conference Environmental and Tourism Potentials.

Srebrenkoska, Vineta and Fidancevska, Emilija and Jovanov, Vojo and Angusheva, Biljana (2013) Sustainable technology and natural environment. Proceedings of XXI international Scientific and Professional Meeting "Ecological Truth" ECO-IST'13. pp. 238-242.

Srebrenkoska, Vineta and Lisickov, Kiril and Fidancevska, Emilija and Blazevska Gilev, Jadranka (2012) Sustainable technologies as a basis of cleaner production. Conference Proceedings, XIV YUCORR International Conference. ISSN 978-86-82343-14-1

Srebrenkoska, Vineta and Risteska, Svetlana and Mijajlovikj, Maja (2015) Thermal Stability and Hoop Tensile Properties of Glass Fiber Composite Pipes. International Journal of Engineering Research & Technology (IJERT), 4 (12). pp. 297-302. ISSN 2278-0181

Srebrenkoska, Vineta and Spasova, Sanja (2011) Design of protective clothes. Conference Proceedings. ISSN 0352-6542

Srebrenkoska, Vineta and Van Acker, Mark and Jasic, Midhat and Fidancevska, Emilija and Grujic, Radoslav (2011) Sustainable technology and alternative energy sources in the food industry. Proceedings of the International Scientific Conference Renewable Energy Sources and Sustainable Development. ISSN 978-99955-49-72-5

Srebrenkoska, Vineta and Zezova, Silvana and Naseva, Simona (2015) Hoop tensile properties of filament wound pipes. Machines, Technologies, Materials, 9 (11). pp. 28-31. ISSN 1313-0226

Stefanov, Mile and Smileski, Rose and Trajkovska - Petkoska, Anka (2003) Производство и примена на експлозивна материја АН-ФО МАК-1. III Советување за дупчење и минирање со меѓународно учество, Охрид, 28-31 мај 2003, Зборник на трудови, Рударско-геолошки факултет - Штип. pp. 381-392.

Stefanov, Mile and Smileski, Rose and Trajkovska - Petkoska, Anka (2002) Техника и технологија за производство на експлозивна материја „АН-ФО МАК-1“ и негова масовна примена во рудниците за примарни минирања на метали и неметали. Зборник на трудови од „Прв симпозиум од областа на експлозивните материи, вооружувањето и воената технологија“, Охрид, 25-28 Sept 2002. pp. 173-182.

Temelkoska, Bratica and Cvetanoski, Radomir (2015) Usability of high pressure steam pipelines in Thermal Power Planst for exploatacion after the expiry of designed period. Tehnika, 64 (6). pp. 982-988. ISSN 0040-2176

Tomovska, Elena and Jordeva, Sonja and Trajković, Dušan and Zafirova, Koleta (2017) Attitudes towards managing post-industrial apparel cuttings waste. The Journal of the Textile Institute. ISSN 0040-5000 (Print), 1754-2340 (Online)

Tomovska, Elena and Jordeva, Sonja and Trajković, Dušan and Zafirova, Koleta (2014) Pre-consumer apparel waste mangement in Macedonia. Book of proceedings 6 th International Conference of Textile. pp. 247-253.

Trajcevski, Neven and Filiposki, Velimir and Kuzinovski, Mikolaj (2004) Personal computer interface for temperature measuring in the cutting process with turning. Proceedings, Faculty of Mechanical Engineering - Skopje, 23 (2). pp. 65-74. ISSN 0351-6067

Trajcevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. Journal of Production Engineering, 12 (1). pp. 47-50. ISSN 1821-4932

Trajković, Dušan and Jordeva, Sonja and Tomovska, Elena and Zafirova, Koleta (2017) Polyester Apparel Cutting Waste as Insulation Material. The Journal of the Textile Institute, 108 (7). pp. 1238-1245. ISSN 0040-5000 (Print), 1754-2340 (Online)

Vujičić, Vladimir and Radeka, Radmila and Smileski, Rose and Zibert, Alojz (1987) Određivanje brzine korozije metala metodom brojanja mjehurića vodika. Vojnotehnicki glasnik, 2 (87). pp. 209-214. ISSN 0042-8469

Yamashita, Hideo and Namera, Akihiro and Cingoski, Vlatko and Kaneda, Kazufumi and Nakayama, Michio (1995) Simulation of Induction Heating of Steel Billet Considering its Movement using 3-D FEM (in Japanese). Journal of Japan Society of Applied Electromagnetics and Mechanics, 3 (3). pp. 16-20.

Zendelska, Afrodita and Golomeova, Mirjana and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj and Krstev, Aleksandar (2015) Adsorption of copper ions from aqueous solutions on natural zeolite. Environment Protection Engineering, 41 (4). pp. 17-36. ISSN 0324-8828 (print) 2450-260X (online)

Zezova, Silvana and Demboski, Goran and Panov, Vlatko (2013) Optimization of technological process of cutting by use of software applications for cut order planning. Tekstil i obleklo (3). pp. 77-79.

Zhezhova, Silvana and Janevski, Aco and Jordeva, Sonja and Andronikov, Darko and Mojsov, Kiro (2017) Apparel Industry in Macedonia, Conditions and Challenges. Xii Simpozijum „Savremene tehnologije i privredni razvoj“. pp. 141-147. ISSN 978-86-89429-25-1

Zhezhova, Silvana and Spasova, Sanja and Srebrenkoska, Vineta (2017) Polymer composite based of textiles in various geometry. V International Congress “Engineering, Environment and Materials in Processing Industry“. ISSN 978-99955-81-21-3

Book Section

Cingoski, Vlatko and Tanurkov, Dimitar and Papsterevski, Kosta (2014) Sustainable Energy Production from Old Coal-fired Thermal Power Plants beyond 2016 Utilizing Major Rehabilitation Program. In: International Environmental Law: Contemporary Concerns and Challenges in 2014. International Environmental Law (2). IUS Software d.o.o. GV Zalozba, Ljubljana, Slovenia, pp. 701-713. ISBN 978-961-247-280-1

Golomeova, Mirjana and Zendelska, Afrodita (2016) Application of Some Natural Porous Raw Materials for Removal of Lead and Zinc from Aqueous Solutions. In: Microporous and Mesoporous Materials. InTech, pp. 21-49. ISBN 978-953-51-2583-9, Print ISBN 978-953-51-2582-2

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2013) Полимерни еко-композитни материјали. In: Materials engineering. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 87-101. ISBN 978-86-6253-015-8

Srebrenkoska, Vineta and Dimeski, Dimko and Bogoeva-Gaceva, Gordana (2013) Композитни материјали. In: Materials engineering. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 76-87. ISBN 978-86-6253-015-8

Srebrenkoska, Vineta and Dimeski, Dimko and Capeska Bogtinoska, Dijana (2013) Студија на случај 1: Рециклирање и обновување на енергијата од отпадни полимерни композити. In: Инженерство на материјали. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 239-252.

Srebrenkoska, Vineta and Dimeski, Dimko and Krsteva, Silvana (2013) Третман на крајот од животот на полимерните композитни материјали. In: Инженерство на материјали. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 209-239. ISBN 978-86-6253-015-8

Srebrenkoska, Vineta and Golomeova, Saska and Krsteva, Silvana (2013) Solid waste management. In: Sustainable technologies. Univerzitet u Novom Sadu, Tehnoloski fakultet, Novi Sad, Srbija, pp. 221-230. ISBN 978-86-6253-011-0 CIP

Srebrenkoska, Vineta and Jasic, Midhat and Sokolovic, Slobodan and Cvrk, Ramzija (2013) Environmental sustainability and industry. In: Sustainable technologies. Univerzitet u Novom Sadu, Tehnološki fakultet , Novi Sad, Srbija, pp. 55-72. ISBN 978-86-6253-011-0

Srebrenkoska, Vineta and Krsteva, Silvana and Golomeova, Saska (2013) Treatment of textile wastes. In: Sustainable technologies and chemical industry. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 129-152. ISBN 978-86-6253-014-1

Srebrenkoska, Vineta and Spasova, Sanja (2013) Air protection. In: Sustainable technologies. Univerzitet u Novom Sadu, Tehnološki fakultet, Novi Sad, Srbija, pp. 209-219. ISBN 978-86-6253-011-0

Tokuda, Ryutaro and Noguchi, So and Yamashita, Hideo and Cingoski, Vlatko (2000) Speed-up for 3D Finite Element Analysis by Using Multigrid Method. In: Proceeding of the 3rd Japanese-Bulgarian-Macedonian Joint Seminar on Applied Electromagnetics. Applied Electromagnetics (3). National University Library "St. Kliment Ohridski", Skopje, Ohrid, Macedonia, pp. 12-16. ISBN 9989-57-094-9

Monograph

Temelkoska, Bratica (2014) Микроструктурни и механички промени на челици отпорни на повишени температури во експлоатациони услови. Documentation. CIP - Каталогизација во публикација Национална и универзитетска библиотека "Св. Климент Охридски", Скопје 669.14.018.44-2(075.8) 669.14.018.45-2(075.8), Штип.

Conference or Workshop Item

Adjiski, Vancho (2014) Modern computer method for planning and simulation of fire scenarios and emergency evacuation plans in underground mines. In: Технологија на подземна и површинска експлоатација на минерални суровини, 14 Nov 2014, Radovis, Macedonia.

Adjiski, Vancho (2012) Opportunities for application of software visualization for better understanding of the work activities and interpreting many types of data in mining engineering. In: Подекс-Повекс '12: Технологија на подземна и површинска експлоатација на минерални суровини, 23 Nov 2012, Stip, Macedonia.

Adjiski, Vancho (2015) Visualization and simulation of the plans for evacuation and rescue in case of fire in underground mines. In: Технологија на подземна и површинска експлоатација на минерални суровини, 13 Nov 2015, Krusevo, Macedonia.

Adjiski, Vancho and Despodov, Zoran and Mijalkovski, Stojance and Stojov, Vlatko (2016) Modeling of the plans for development of underground mining facilities. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Dec 2016, Strumica, Macedonia.

Basovski, Gorgi and Dimeski, Dimko and Srebrenkoska, Vineta and Smileski, Rose (2004) Спојување на метали со помош на експлозија. In: XVIII конгрес на хемичарите и технолозите на Македонија, 23-25 Sept 2004, Охрид.

Boev, Blazo and Lepitkova, Sonja (1996) Selenium in sediments along the reaches of the river Zletovica and its tributares. In: Yugoslav Conference with International participants , 25-27 April, 1996, Beograd.

Bogoeva-Gaceva, Gordana and Dimeski, Dimko and Srebrenkoska, Vineta and Manov, Zlatan and Grozdanov, Anita and Buzarovska, Aleksandra and Avella, Maurizio (2007) Sustainable composite materials based on renewable resources. In: IUMACRO-07 Macromolecules for a Sustainable, Safe and Healthy World, 10-13 June 2007, Polytechnic University - Brooklyn, New York, USA.

Dambov, Risto and Brandy, Fausto and Dambov, Ilija (2017) Expansive mortar to demolish and cut rocks and concretes. In: 7th Balkanmine Congress – Proceedings, 11-13 Oct 2017, Prijedor, BiH.

Dambov, Risto and Karanakova Stefanovska, Radmila and Dambov, Ilija (2015) Significance and role of stemming of the blast hole. In: Podeks - Poveks 2015, 13-15 Nov 2015, Krusevo, Macedonia.

Demboski, Goran and Srebrenkoska, Vineta and Zezova, Silvana and Kortoseva, Sonja (2016) Utilization of garment industry textile waste. In: GREDIT’2016 – Green Development Infrastucture Technology, 31 March - 02 Apr 2016, Skopje, Macedonia.

Despodov, Zoran and Cekerovski, Todor and Minov, Kirco (2015) Повеќекритериумска анализа за избор на оптимален вид на дампер за услови во рудникот „Бучим”. In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Despodov, Zoran and Mijalkovski, Stojance and Adjiski, Vancho and Kostov, Mitko (2017) Waste management plan generated from mining activities in the mine for production of lead and zinc "Toranica" - Kriva Palanka. In: 6th International Symposium Mining and environmental protection, 21-24 June 2017, Vrdnik, Serbia.

Despodov, Zoran and Mijalkovski, Stojance and Gocevski, Borce and Mitić, Saša (2016) Determination of the optimal length on the ore excavation block for the sublevel caving method. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Nov 2016, Strumica, Macedonia.

Dimeski, Dimko (2004) Kompozitni materijali za licna balisticka zastita-dizajn i performansi. In: Production and Industrial Engineering Association.

Dimeski, Dimko (1987) Ojačani plastični materijali za balističku zaštitu. In: Fiber Reinforced Composites, Novi Sad.

Dimeski, Dimko (2012) Poly(lactic acid) /kenaf fiber composites: effect of microfibrillated cellulose on interface-sensitive properties. In: XXII Congress of Chemists and Technologists of Macedonia.

Dimeski, Dimko (2006) Processing of PLA/RS and PLA/Kenaf pellets into composite panels. In: Eco-Houses Based on Eco-Friendly Polymer Composite Construction Materials - ECO-PCCM, FP6 Project ECO-PCCM 6th Meeting, Budapest.

Dimeski, Dimko (2006) Processing of PLA/RS and PLA/Kenaf pellets into composite panels. In: FP6 Project ECO-PCCM Sixth Meeting, Budapest.

Dimeski, Dimko (2007) Production and Characterization of Kenaf Fibers / PP Composites. In: ECO-PCCM Second Meeting, Belgrade, 7-8 April 2005..

Dimeski, Dimko (2004) Sporedbeni karakteristiki na ednonasocnite i dvonasocnite kompoziti nameneti za balisticka zastita. In: XVIII kongres na hemicarite i tehnolozite na Makedonija.

Dimeski, Dimko and Bogoeva-Gaceva, Gordana and Srebrenkoska, Vineta (2013) The implementation of full factorial experimental design in predicting the ballistic strength of glass fiber/phenolic composites. In: X Simpozijum Savremene tehnologije i privredni razvoj, 22-23 Oct 2013, Leskovac, Srbija.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Advanced prepreg ballistic composites for military helmets. In: 6th International Scientific Conference on Defensive Technologies - OTEH 2014, 09-10 Oct 2014, Belgrade, Republic of Serbia.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) A comparison of penetration mechanics of metal and fiber/resin composite targets against ballistic impact. In: VIth International Metallurgical Congress, 29 May-01June 2014, Ohrid, Macedonia.

Dimeski, Dimko and Srebrenkoska, Vineta (2013) The optimization of fiber-reinforced backpanel as a substrate for ceramic/composite ballistic inserts for personal protection. In: X Simpozijum Savremene tehnologije i privredni razvoj, 22-23 Oct 2013, Leskovac, Srbija.

Dimeski, Dimko and Srebrenkoska, Vineta (2014) The role of contemporary ferrous and nonferrous materials in ballistic protection of military vehicles. In: VIth International Metallurgical Congress, 29 May-01June 2014, Ohrid, Macedonia.

Dimeski, Dimko and Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Manov, Zlatan and Grozdanov, Anita and Avella, Maurizio and Zucchini, Valerio (2006) Kenaf fiber/Polypropylene composites as potentional material for partitioning panels in buildings. In: 12th European Conference on Composite Materials, 29 Aug-1 Sept 2006, Biarritz.

Doneva, Nikolinka and Despodov, Zoran and Mirakovski, Dejan and Hadzi-Nikolova, Marija and Mijalkovski, Stojance (2015) Blasting in underground mining. In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Golomeov, Blagoj and Golomeova, Mirjana and Zendelska, Afrodita (2017) The use of geosynthetic materials in the design of tailings for the increased protection of the wider environment. In: 4th Congress on Dams, 28-30 Sept 2017, Struga, Macedonia.

Golomeova, Mirjana and Zendelska, Afrodita and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj (2015) Removal of heavy metals from mine wastewater using zeolite bearing tuff. In: VIII Стучно советување со меѓународно учество Подекс-Повекс 2015, 13-15 Nov 2015, Krusevo, Macedonia.

Golomeova, Sanja and Srebrenkoska, Vineta and Golomeova, Saska and Zezova, Silvana (2013) Термохемиски процеси за енегретско искористување на отпад. In: Енергетска ефикасност и одржлив развој, 16-18 May 2013, Скопје.

Ivanovski, Dejan and Mijalkovski, Stojance and Gocevski, Borce and Ristovski, Cedo (2015) Contribution of "Dzino plast" clay plug in optimization of drilling and blasting in mine for lead and zinc "Sasa". In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Janevski, Aco and Bogoeva-Gaceva, Gordana (2013) Crystalization of β-nucleated iPP in model composites with glass fibres. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Janevski, Aco and Bogoeva-Gaceva, Gordana (2013) Kinetical and thermodynamical parametars of crystallization of iPP nucleated with mixed α-nucleators. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Jordeva, Sonja and Cortoseva, Sonja (2013) The influence of the raw material content and structural characteristics of interlock double layered knitted fabrics on the physico-mechanical properties. In: 10th Symposium ”Novel technologies and economic development”, 22-23 Oct 2013, Leskovac, Serbia.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Popeski-Dimovski, Riste and Zafirova, Koleta (2015) Sound insulation properties of structure designed from apparel cutting waste. In: 15th AUTEX World Textile Conference 2015, 10-12 June 2015, Bucharest, Romania.

Jordeva, Sonja and Tomovska, Elena and Trajković, Dušan and Zafirova, Koleta (2016) Fire resistance of insulation structure from polyester cutting waste. In: 7-th International Conference of Textile, 10-11 Nov 2016, Tirana, Albania.

Krstev, Boris and Krstev, Aleksandar (2003) Processing of halcopyrite low grade ore - enhancing gold recovery by leaching and bioleaching. In: Internacional conference "New Trends in Mineral processing V", 26-28.06.2003, Ostrava, Czech Republic.

Krsteva, Silvana and Demboski, Goran (2005) Проектирање на линија за монтажа на џинс фармерки. In: Шести конгрес по чиста и применета хемија на студентите од Македонија, 1.12.2005, Технолошко-металуршки факултет, Скопје.

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr (2008) Automation of experimental investigation of physical phenomena in the cutting process by machining with turning. In: XXXII Conference on production engineering SPMS 2008, 18-20 Sept 2008, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr (2009) Investigation of cutting forces during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Kuzinovski, Mikolaj and Trajcevski, Neven and Cichosz, Piotr and Tomov, Mite (2006) Monitoring system for investigation of the cutting forces in the machining with turning. In: Proceedings of the 9-th International Scientific Conference "MMA 2006 Flexible Technologies", 15-16 June 2006, Novi Sad, Srbija.

Kuzinovski, Mikolaj and Trajcevski, Neven and Fita, Stanislaw and Tomov, Mite (2006) Monitoring system in the experimental investigations of the temperature in the cutting process by machining with turning. In: Proceedings of the 9-th CIRP international workshop on modeling of machining operations, 11-12 May 2006, Bled, Slovenia.

Mijalkovski, Stojance and Despodov, Zoran and Adjiski, Vancho and Stefanovski, Dimitar (2017) Plan for waste management in the mine for production of lead and zinc "Zletovo" – Probishtip. In: 6th International Symposium Mining and environmental protection, 21-24 June 2017, Vrdnik, Serbia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Doneva, Nikolinka and Adjiski, Vancho and Mitić, Saša (2016) Economical parameters that have impact on successful operation of mines. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Nov 2016, Strumica, Macedonia.

Mijalkovski, Stojance and Despodov, Zoran and Mirakovski, Dejan and Doneva, Nikolinka and Hadzi-Nikolova, Marija and Ivanovski, Dejan (2015) Method for determining on the indicators for recovery and dilution of the ore. In: VIII Стручно советување со меѓународно учество Подекс-Повекс '15, 13-15 Nov 2015, Krusevo, Macedonia.

Pavlova, Elvira and Risteska, Svetlana and Srebrenkoska, Vineta and Kostadinoska, Biljana and Petkoska, Biljana (2016) Glass fabrics as reinforcement for composite plates. In: VII International Metallurgy Congress, Metallurgy, Materials and Environmental, 09-12 June 2016, Ohrid, Macedonia. (Unpublished)

Pop Metodieva, Biljana and Zhezhova, Silvana and Srebrenkoska, Vineta and Naseva, Simona and Srebrenkoska, Sara (2015) Design of polymer composite pipes produced by filament winding technology. In: XII International Congress Machines, Technologies, Materials 2015, 16-19 Sept 2015, Varna, Bulgaria.

Risteska, Svetlana and Samakoski, Blagoja and Srebrenkoska, Vineta and Stefanovska, Maja (2015) Determination of flexural properties of hybrid composite parts. In: IV International Congress “Engineering, Environment and Materials in Processing Industry, 04–06 March 2015, Jahorina, Bosnia and Herzegovina.

Smileski, Rose and Popovski, Orce (2001) Детекција и анализа на стопанските експлозиви по нивното активирање - експлозија. In: Второ заседание од советувањето на тема „Рударско геолошко инженерство во рударските, градежните и водостопанските објекти“, 18-20 Oct 2001, Струга.

Smileski, Rose and Popovski, Orce and Naumoski, Jovan (2003) Determination of chemical stability of gunpowders by qualitative and quantitative methods. In: 6th Conference on weapon systems, 28-30 April 2003, Brno, Czech Republic.

Smileski, Rose and Popovski, Orce and Trajkovska - Petkoska, Anka (2000) Хроматографско испитување на амонимуннитрат и тринитротолуен во бризантните експлозивни материи кои се употребуваат во стопанството. In: II. Советување за дупчење и минирање, со меѓународно учество, 25-27 May 2000, Охрид, Македонија.

Smileski, Rose and Trajkovska - Petkoska, Anka and Popovski, Orce (2001) Ispitivanje hemijske stabilnosti baruta metodom tecne hromatografija. In: XXI Simpozium o eksplozivnim materijama, Jugoslovenski komitet za eksplozivne materije, 21-23 Nov 2001, Tara.

Spasovski, Orce and Spasovski, Daniel (2016) Хидрогеолошки истражувања за обезбедување на потребните количини на подземна вода за водоснабдување на село Крушица, општина Свети Николе. In: Podeks - Poveks 2016, 11-13 Dec 2016, Strumica, Macedonia.

Spasovski, Orce and Spasovski, Daniel and Zlatkov, Risto (2016) Третман на отпадните води од технолошкиот процес на фабриката за производство на месо и сувомеснати производи МИК од Свети Николе, Р. Македонија. In: Podeks-Poveks'16, 11-13 Nov 2016, Strumica, Macedonia.

Spritova, Kika and Spasovski, Orce (2016) Геохемиски карактеристики на скарновите од наоѓалиштето Иберли. In: Podeks-Poveks'16, 11-13 Nov 2016, Strumica, Macedonia.

Srebrenkoska, Vineta (2010) Доживотно учење. In: Dissemination confference, 22 March 2010, Skopje, R.Macedonia.

Srebrenkoska, Vineta (2006) Characterization of kenaf/PLA composites. In: ECO-PCCM Fourth Meeting, 6-7 Apr 2006, Sofia, Bulgaria. (Unpublished)

Srebrenkoska, Vineta (2010) Creation of university-enterprise cooperation networks for education on sustainable technologies. In: Dissemination confference, 24 June 2010, Stip, R.Macedonia.

Srebrenkoska, Vineta (2014) Design of filament wound glass reinforced plastic (GRP) pipes for construction. In: Next Workshop - Generation Design Guidelines for Composites in Construction, 22 October 2014, Kaiserslautern, Germany. (Unpublished)

Srebrenkoska, Vineta (2006) Development and design of recycling-reuse of composite components. In: ECO-PCCM Fifth Meeting, 06, 4-5 Sept 2006, Barcelona, Spain.

Srebrenkoska, Vineta (2011) Dust separation on bio mass combustion plants. In: Course development workshop 1, 17-21 Jan 2011, Ohrid, Macedonia.

Srebrenkoska, Vineta (2012) Eko kompozitne materijale. In: Kurs održive tehnologije u hemijskoj, prehrambenoj i farmacutskoj industriji, 07-08 Maj 2012, Novi Sad. (Unpublished)

Srebrenkoska, Vineta (2014) Environmentally friendly technologies for new polymer compozite materials: challenges and opportunites. In: Sеvеnтh International Scientific Conference Contemporary Materials, 21-22 Dec 2014, Banja Luka. (Unpublished)

Srebrenkoska, Vineta (2011) Lifelong Learning in the field of the sustainable technologies. In: Course development workshop 1, 17- 21 Jan 2011, Ohrid, Macedonia. (Unpublished)

Srebrenkoska, Vineta (2014) New Composites-based on natural fibers. In: Next Generation Design Guidelines for Composites in Construction, 13-14 March 2014, Lyon, France. (Unpublished)

Srebrenkoska, Vineta (2012) Polymer eco-composite materials – end of life treatment. In: Kurs održive tehnologije u hemijskoj, prehrambenoj i farmacutskoj industriji, 05 May 2012, Tuzla.

Srebrenkoska, Vineta (2007) Processing of PLA/RS and PLA/Kenaf pellets into composite panels. In: Sixth Meeting, 28-29 March 2007, Budapest, Hungary.

Srebrenkoska, Vineta (2010) Screening and analyzing the status of knowledge in industry concerning sustainability and formulation the first course scheme. In: Meeting, 2010, Skopje. (Unpublished)

Srebrenkoska, Vineta (2010) Screening and analyzing the status of knowledge in industry concerning sustainability and formulation the first course scheme. In: Tempus workshop, 24 June 2010, Stip, R.Macedonia.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2014) Preparation and recycling of polymer eco-composites. In: MatCatNet Workshop "From molcules to functionalised materials", 5-10 Sept 2014, Ohrid Macedonia.

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana and Dimeski, Dimko (2010) Preparation and characterization of lignocellulosic material filled eco-composites. In: XII YUCORR International Conference, 18-21 May 2010, Tara.

Srebrenkoska, Vineta and Demboski, Goran and Bogoeva-Gaceva, Gordana and Krsteva, Silvana (2013) Preparation and characterization of composites based on textile waste. In: 8th International Conference of the Chemical Societies of the South-East European Countries ICOSECS 8, 27-27 June 2013, Faculty of technology, Belgrade, Serbia.

Srebrenkoska, Vineta and Dimeski, Dimko (2016) End of life treatment of polymer composite materials. In: GREDIT’2016 – Green Development Infrastucture Technology, 31 March - 02 Apr 2016, Skopje, Macedonia.

Srebrenkoska, Vineta and Ducman, Vilma and Sever Skapin, Adrijana and Fidancevska, Emilija and Anguseva, Biljana and Jovanov, Vojo (2016) Investigation of the possibilities for application of NORM into polymer materials. In: V International Conference on Environmental Protection V. Terrestrial Radioisotopes in Environment, 17-20 May 2016, Veszprem, Hungary.

Srebrenkoska, Vineta and Kotynia, Renata and Bojanowski, Krzysztof and Zhezhova, Silvana (2015) Mechanical characterization of the filament wound pipes for construction. In: Working Group Meeting Next Generation Design Guidelines for Composites in Construction, Lecce, Italy, 19-21 May 2015, Lecce, Italy. (Unpublished)

Srebrenkoska, Vineta and Luceski, Nikola and Bogoeva-Gaceva, Gordana (2004) Properties of the pultruded composites reinforced with glass fibers. In: XVIII конгрес на хемичарите и технолозите на Македонија, 23-25 Sept 2004, Охрид.

Srebrenkoska, Vineta and Mitrev, Sasa and Atanasova-Pacemska, Tatjana and Karov, Ilija (2014) Lifelong learning for creativity and innovation. In: UNITECH'14 - International Scientific Conference, 21-22 Nov 2014, Gabrovo, Bulgaria.

Srebrenkoska, Vineta and Naseva, Simona and Risteska, Svetlana and Stefanoska, Maja and Srebrenkoska, Sara (2015) Effects of winding angles on mechanical properties of filament wound pipes. In: IV International Congress “Engineering, Environment and Materials in Processing Industry, 04-06 March 2015, Jahorina, Bosnia and Herzegovina.

Srebrenkoska, Vineta and Risteska, Svetlana and Mijajlovikj, Maja and Srebrenkoska, Sara and Zezova, Silvana (2016) Mechanical and thermal properties of filament wound composite pipes. In: VII International Metallurgy Congress, Metallurgy, Materials and Environmental, 09-12 June 2016, Ohrid, Macedonia. (Unpublished)

Srebrenkoska, Vineta and Risteska, Svetlana and Srebrenkoska, Sara (2014) Production of filament wound composite tubes for construction. In: Present and Future of FRP in Construction, 23 Oct 2014, Technical University-Kaiserslautern, Germany. (Unpublished)

Srebrenkoska, Vineta and Zhezhova, Silvana and Naseva, Simona (2015) Hoop tensile properties of filament wound pipes. In: XII International Congress Machines, Technologies, Materials 2015, 16-19 Sept 2015, Varna, Bulgaria.

Taskovski, Stanke and Gocevski, Borce and Mijalkovski, Stojance (2016) Securing (manual scaling) of underground workplaces. In: 9th International Conference in the Field of Underground and Surface Exploitation of Mineral Resources Podeks-Poveks ‘16, 11-13 Nov 2016, Strumica, Macedonia.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajcevski, Neven (2010) Analysis of the possible influence in determining of the roughness profile in real non-periodic surfaces by application of Gaussian and 2RC filters. In: XXXIII Naukowa Szkoła Obróbki Sciernej, Politechnika Łódzka, Wydział Mechaniczny, 8-10 Sept 2010, Lodz, Poland.

Tomov, Mite and Cichosz, Piotr and Kuzinovski, Mikolaj and Trajcevski, Neven (2010) Investigation of the function and influence of Gaussian and 2RC filters to determine of roughness profile on real periodic surfaces. In: IV Konferencja Naukowa, Szkoła Obróbki Skrawaniem, Politechnika Łódzka, Wydział Mechaniczny, 6-8 Sept 2010, Lodz, Poland.

Tomov, Mite and Kuzinovski, Mikolaj and Trajcevski, Neven (2010) Function on Gaussian and 2RC filters to determine the roughness profile in real non-periodic and periodic surfaces. In: 14-th International Research/Expert Conference "Trends in the Development of Machinery and Associated Technology" TMT 2010, 11-18 Sept 2010, Mediterranean Cruise.

Tomovska, Elena and Jordeva, Sonja and Zafirova, Koleta (2016) Contribution of texture to aesthetic properties. In: 7-th International conference of textile, 10-11 Nov 2016, Tirana, Albania.

Tomovska, Elena and Jordeva, Sonja and Zafirova, Koleta (2016) Visual perception of pantyhose texture. In: XXIV Congress of Chemists and Technologists of Macedonia, 11-14 Sep 2016, Ohrid, R. Macedonia.

Trajcevski, Neven and Kuzinovski, Mikolaj and Cichosz, Piotr (2009) Investigation of temperature during machining process by high speed turning. In: 10-th International Scientific Conference "MMA 2009", 09-10 Oct 2009, Novi Sad, Serbia.

Trajcevski, Neven and Kuzinovski, Mikolaj and Filiposki, Velimir and Cichosz, Piotr (2004) Computer aided measurement of the temperature in the cutting process by machining with turning. In: Proceedings of the scientific conference with international participation "Manufacturing and menagement in 21-st century", 16-17 Sept 2004, Ohrid, Republic of Macedonia.

Zendelska, Afrodita and Golomeova, Mirjana and Blažev, Krsto and Krstev, Boris and Golomeov, Blagoj and Krstev, Aleksandar and Jakupi, Shaban (2014) Equilibrium studies of manganese removal from aqueous solution by adsorption on natural zeolite. In: VI International Metallurgical Congress, 29 May-01 June 2014, Ohrid, Macedonia.

Zendelska, Afrodita and Golomeova, Mirjana and Golomeov, Blagoj and Krstev, Boris (2016) Characteristics and application on raw materials for metals removal from aqueous solutions. In: Podeks-Poveks'16, 11-13 Nov 2016, Strumica, Macedonia.

Zendelska, Afrodita and Golomeova, Mirjana and Golomeov, Blagoj and Krstev, Boris (2016) Possibilities for use of natural raw materials for removal of heavy metals from aqueous solutions. In: 16th International Multidisciplinary Scientific GeoConference SGEM 2016, 28 June-6 July 2016, Albena, Bulgaria.

Zlatev, Zoran and Golubovski, Roman and Gicev, Vlado (2016) Data processing of displacements between the ground and the point of cracking at the seven – story Van Nuys Hotel. In: The 7th International Conference "Information Technologies and Education Development – ITRO" 2016, 10 June 2016, Zrenjanin, Serbia.

Book

Dambov, Risto (2013) Дупчење и минирање. Универзитет „Гоце Делчев“, Штип. ISBN 978-608-4708-62-9

Dambov, Risto (2015) Специјални минирања. 622.235-049.8(035) . Универзитет „Гоце Делчев”, Штип, Македонија. ISBN 978-608-244-220-4

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Дизајн и анализа на експерименти. Универзитет „Гоце Делчев” - Штип . ISBN 978-608-244-057-6

Dimeski, Dimko and Srebrenkoska, Vineta (2014) Механички својства на текстилни материјали. Универзитет „Гоце Делчев” - Штип. ISBN 978-608-244-105-4

Fidancevska, Emilija and Srebrenkoska, Vineta (2013) Materials Engineering. Univerzitet u Novom Sadu, Tehnološki fakultet Novi Sad, CIP - Каталогизација во публикација Национална и универзитетска библиотека „Св. Климент Охридски", Скопје; CIP - Katalogizacija u publikaciji Biblioteka Matice srpske, Novi Sad. ISBN 978-608-4708-30-8

Golomeova, Mirjana and Golomeov, Blagoj (2012) Методи на испитувања во минералната технологија. Универзитет ”Гоце Делчев” – Штип, Штип. ISBN 978-608-4504-80-1

Project

Gicev, Vlado and Golubovski, Roman and Popovski, Risto and Cernik - Anastasovska, Dragana and Risteska, Aleksandra and Zlatev, Zoran and Kokalanov, Vasko (2015) Распределба на сеизмичка енергија при интеракција објект-темел-почва. [Project] (Submitted)

Golomeov, Blagoj (2012) Анекс на проектот за оскултација на хидројаловиште број 3 фаза 2 на рудник „Саса“ - Мак.Каменица. [Project] (Unpublished)

Srebrenkoska, Vineta (2013) Развој на одржлива технологија за производство на нови композити со обезбедување на повратен тек на отпадниот материјал. [Project] (In Press)

Srebrenkoska, Vineta (2013) COST Action TU1205 next generation design guidelines for composites in construction. [Project] (In Press)

Srebrenkoska, Vineta (2013) COST Action TU1301 norm for building materials (NORM4BUILDING). [Project] (In Press)

Srebrenkoska, Vineta (2016) Self-healing As preventive Repair of Concrete Structures. [Project] (In Press)

Srebrenkoska, Vineta and Risteska, Svetlana (2015) Active and intelligent fibre-based packaging - innovation and market introduction (ActInPak). [Project] (In Press)

Trajković, Dušan and Jordeva, Sonja and Zafirova, Koleta and Stepanovic, Jovan and Tomovska, Elena (2015) Razvoj novih i unapreĎenje postojećih postupaka proizvodnje tehničkih tekstilnih materijala”. [Project]

Zavargo, Zoltan and Srebrenkoska, Vineta and Fidancevska, Emilija and Jasic, Midhat and Cakic, Milorad and Grujic, Radoslav (2013) Dissemination Booklet. [Project]

Thesis

Jordeva, Sonja (2010) Термофизиолошки комфор на плетенини за спортска облека во функција од структурните карактеристики и суровинскиот состав. Masters thesis, Универзитет „Св. Кирил и Методиј" -Скопје.

Krsteva, Silvana (2011) Оптимизација на технолошкиот процес на кроење за ефикасно искористување на материјалите. Masters thesis, Технолошко-металуршки факултет- УКИМ- Скопје.

Srebrenkoska, Vineta (2002) Obtaining and characterization of composite material base on ablative phenolic resin and carbon fibers. Masters thesis, Faculty of Technology and Metallurgy, St. Cyril and Methodius University, Skopje, R. Macedonia.

Srebrenkoska, Vineta (2009) Obtaining and characterization of polymer eco-composites: comparison with conventional and the possibility of reusing. PhD thesis, Faculty og Technology and Metallurgy, University St Cyril and Methodius, Skopje, R. Macedonia.

Experiment

Krstev, Boris (2016) Извештај од Ревизија на Основен проект за Казан Дол - Валандово. [Experiment] (Unpublished)

Krstev, Boris (2016) Извештај од Ревизија на Дополнителен проект за Казан Дол - Валандово. [Experiment] (Unpublished)

Srebrenkoska, Vineta (2005) Comparation of kenaf fiber composites to structural composites produced by "Eurokompozit". [Experiment]

Srebrenkoska, Vineta (2007) Fabrication of compression molded eco-composites: optimal process conditions. [Experiment]

Srebrenkoska, Vineta (2016) Investigation of the possibilities for application of NORM into polymer materials. [Experiment] (Submitted)

Srebrenkoska, Vineta and Bogoeva-Gaceva, Gordana (2009) Optimizacija na procesot pultruzija za proizvodstvo na kompozitni profili. [Experiment]

Srebrenkoska, Vineta and Dimeski, Dimko (2009) Development of new actuators, materials and technology for the production of advanced pneumatic and hydraulic valves. [Experiment]

Srebrenkoska, Vineta and Dimeski, Dimko (2009) Еурека проект “Development of new actuators, materials and tehnology for the production of advanced pneumatic and hydraulic valves”. [Experiment]

Teaching Resource

Janevski, Aco (2014) Основи на наука за материјалите 1 - скрипта. ISBN 978-608-4708-99-5.

Mitreva, Elizabeta and Golomeova, Saska (2013) Менаџмент на конфекциско претпријатие - скрипта. ISBN 978-608-4708-39-1.

Other

Fidancevska, Emilija and Srebrenkoska, Vineta (2013) Creation of university-enterprise cooperation networks for education on sustainable technologies. Society of Chemists and Technologists of Macedonia.

Srebrenkoska, Vineta (2015) Mechanical and thermal characterization of the filament wound composites for construction. University in Sheffield. (Unpublished)

This list was generated on Sat Nov 18 09:48:30 2017 CET.